

FloweyBoardV1
[WIP] A device for reading and saving bioelectric signals of plants
- Size
- 109 × 100.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 63
- Pads
- 221
- Tracks, vias
- 577, 44
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Jun 2025
- Updated
- 6 Jul 2025
Overview
FloweyBoardV1 is an open-source printed circuit board by Wojtekb30, from the Wojtekb30/Flowey-board repository on GitHub. It is a 2-layer board of 109 × 100.3 mm with 41 parts on 63 nets, routed with 577 tracks and 44 vias.
It is built around the INA333AIDGKR, ADS1115IDGSR and TF-015, with the DS3231M+TRL, RT0603BRD071KL and 3386P-1-102TLF among its other parts. Its parts include 18 resistors, 8 connectors, 7 capacitors, 5 ICs and 1 switch. It belongs with the RP2040 boards of this library.
Main components
7INA333AIDGKR
MSOP-8-40℃~+125℃ 0.16V/us 1 1.8V~5.5V 100dB 100nV/℃ 200pA 200pA 25uV 5.5V 50nV/√Hz@1kHz 50uA Rail-to-Rail Output MSOP-8 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation AmplifiersADS1115IDGSR
VSSOP-10-40℃~+125℃ 16 1LSB 2 2.048V 2V~5.5V 500nA 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)TF-015
SMD-35℃~+85℃ 2mm Connector and Ejector MicroSD Card (TF Card) Push-Push Yes SMD SD Card / Memory Card Connector ROHSSOFNGSD Card / Memory Card ConnectorDS3231M+TRL
SOIC-16-300mil-40℃~+85℃ 2.3V~5.5V 200uA 3uA Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function Yes SOIC-16-300mil Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksRT0603BRD071KL
0603-55℃~+155℃ 100mW 1kΩ 75V Thin Film Resistor ±0.1% ±25ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface Mount3386P-1-102TLF
插件-3P,9.5x9.5mm1kΩ 500mW ±10% ±100ppm/℃ 插件-3P,9.5x9.5mm Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable ResistorsKMR221GLFS
SMD,4.6x2.8mm-40℃~+85℃ 1.9mm 2.8mm 2N 32V 4.6mm 50mA Gull Wing Round Button SPST Surface Mount,Vertical SMD,4.6x2.8mm Tactile Switches ROHSC&KTactile Switches
README
README.mdFlowey-board
WIP - not finished yet
A device for reading and saving bioelectric signals of plants.
I will write a more detailed description once I recieve it from manufacturing and make software for it, but this device reads analog signals, amplifies them and reads them with a 16-bit ADC.
It also has a RTC, port for connecting a photodiode, ports for connecting a dirt moisture sensor, and a potentiometer which allows to somewhat manually write an information/note (for example you can agree that if it's set to 100% it's a note meaning "I forgot to water the plant")
And lastly, it has a MicroSD card slot for writing all of that data to the memory card.
It's meant for plant bioelectric signals, but it can be used for any analog signals.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0402WGF1002TCE | SamacSys_Parts:RESC1005X40N | R1, R2, R3, R4, R7, R12, R13, R14, R15, R16, R17 |
| 7 | CL10B104KC8NNNC | SamacSys_Parts:CAPC1608X90N | C7, C8, C9, C10, C11, C12, C13 |
| 7 | WJ126V-5.0-3P | SamacSys_Parts:WJ126V503P | J2, J3, J4, J5, J6, J7, J8 |
| 5 | RC0402FR-074K7L | SamacSys_Parts:RESC1005X40N | R8, R9, R10, R11, R18 |
| 2 | INA333AIDGKR | SamacSys_Parts:SOP65P490X110-8N | IC2, IC4 |
| 2 | RT0603BRD071KL | SamacSys_Parts:RESC1608X55N | R5, R6 |
| 1 | 1027 | SamacSys_Parts:1027 | U1 |
| 1 | 3386P-1-102TLF | SamacSys_Parts:3386P_1 | VR1 |
| 1 | ADS1115IDGSR | SamacSys_Parts:SOP50P490X110-10N | IC1 |
| 1 | DS3231M+TRL | SamacSys_Parts:SOIC127P1032X265-16N | IC3 |
| 1 | KMR221G_LFS | SamacSys_Parts:KMR_2 | S1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_SMD | A1 |
| 1 | TF-015 | SamacSys_Parts:TF015 | J1 |
Similar boards
- 4 layers90 × 90 mm

- 4 layers139.7 × 186 mm

- 4 layers

- 2 layers101 × 57.8 mm

MusselGapeTracker RevF
millerlp/MusselGapeTracker_hardware
Mussel Gape Tracker circuit board designs
324 partsGPL-3.0 - 2 layers189 × 117 mm

ADS1298 FINAL
node9909/Graduation-project-files
design of a HD-SEMG system, using ads1298, Arduino DUE, ST32F4, INA333 adn AD8232
295 parts10 - 2 layers45.2 × 65 mm

Precision Digital Micro Current Meter
jobitjoseph/Precision-Digital-Micro-Current-Meter
Keeping track of extremely low current levels is often essential when developing or testing low-power devices, especially in the field of embedded systems and battery-operated electronics.
67 parts7 - 2 layers220 × 50 mm

NeuroVox v2.0
Swapnil007-Curious/NeuroVox-v2.0
NeuroVox v2.0 is a conformal 220×50mm forearm wearable PCB. Powered by an ESP32-S3, it captures high-res 4-channel EMG via AD8232, INA333, and ADS1299 ICs using leadless, integrated dry Ag/AgCl edge electrodes.
94 parts3 - 2 layers95.5 × 68.3 mm

Weight sensor pcb
Capstone-Group-C1/weight-sensor-pcb
Converts Load Cell(s) analog signal into CAN signal.
90 parts
Questions
How big is the FloweyBoardV1 PCB?
It measures 109 × 100.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FloweyBoardV1 use?
41 parts, built around the INA333AIDGKR, ADS1115IDGSR, TF-015 and DS3231M+TRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FloweyBoardV1 KiCad files?
From the Wojtekb30/Flowey-board repository on GitHub, at the commit this page was made from: the board is FloweyBoardV1/FloweyBoardV1.kicad_pcb and its schematic FloweyBoardV1/FloweyBoardV1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FloweyBoardV1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Wojtekb30 before reusing the design.