

ESP32 custom
A 3D walkthrough of the board is available in demo/3D view of the Board.mp4.
- Size
- 63.7 × 21 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 73
- Pads
- 223
- Tracks, vias
- 703, 95
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Apr 2026
- Updated
- 16 Apr 2026
Overview
ESP32 custom is an open-source printed circuit board by verma-suraj, from the verma-suraj/ESP32_custom repository on GitHub. It is a 4-layer board of 63.7 × 21 mm with 46 parts on 73 nets, routed with 703 tracks and 95 vias.
It is built around the AMS1117-3.3, LESD5D5.0CT1G and KMR621NGLFS, with the SS8050 among its other parts. Its parts include 15 resistors, 12 capacitors, 5 diodes, 4 transistors and 4 connectors. It belongs with the ESP32 boards of this library.
Main components
4AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorisedKMR621NGLFS
SMD-40℃~+85℃ 1.9mm 2.8mm 2N 32V 4.6mm 50mA Gull Wing IP67 Round Button SPST-NO Surface Mount,Vertical SMD Tactile Switches ROHSC&KTactile SwitchesSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdESP32 Custom PCB — Team Circuitrix
A custom ESP32 PCB designed in KiCad.
Repository Structure
ESP32_custom/ # KiCad schematic and PCB design files
├── *.kicad_sch # Schematic
├── *.kicad_pcb # PCB layout
├── *.kicad_pro # Project file
├── *.kicad_dru # Design rules
└── Gerber File/ # Manufacturing files (Gerber + drill)
Bill of Materials/ # BOM in CSV and XLSX formats
demo/ # 3D board view video and PCB rendersDemo
| Top View | Bottom View |
|---|---|
![]() | ![]() |
A 3D walkthrough of the board is available in demo/3D view of the Board.mp4.
Reference Datasheets
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C7, C8, C9, C11, C12, C13 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R7, R11, R12, R13 |
| 3 | LESD5D5.0CT1G | easyeda2kicad:SOD-523_L1.2-W0.8-LS1.6-BI | D1, D2, D3 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R2, R8 |
| 2 | 2N7002T-7-F | easyeda2kicad:SOT-523-3_L1.6-W0.8-P1.00-LS1.6-BR | Q1, Q2 |
| 2 | Conn_01x17_Pin | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J3, J4 |
| 2 | KMR621NGLFS | easyeda2kicad:KEY-SMD_4P-L4.2-W2.8-P1.60-LS4.6 | SW1, SW2 |
| 2 | R | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 1 | 105017-0001 | easyeda2kicad:MICRO-USB-SMD_105017-0001 | USB1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 22.1K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 47.5K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 5.1K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 560 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32E(4MB) | easyeda2kicad:WIFI-SMD_ESP32-WROOM-32E | U3 |
| 1 | LED1 | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | LED2 | LED_SMD:LED_0402_1005Metric | D5 |
Similar boards
- 2 layers50.2 × 95.2 mm

- 4 layers24 × 44 mm

- 2 layers61 × 58 mm

Proto
crypticdenis/Entangled-Hearts
The goal is a slim, fully self-contained touch screen device on a custom PCB that can be charged and programmed via a single USB-C port.
35 parts - 2 layers68 × 54 mm

Controller
byrantech/stepcraft-3-d600-controller
Open-source FluidNC Controller for the Stepcraft-3/D.600 system.
97 parts2MIT - 4 layers68.1 × 75 mm

- 4 layers408.7 × 50 mm

Partial Drawer Controller v1
Robast-GmbH/PCB_Designs
This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…
619 parts1MIT - 4 layers92 × 60 mm

- 4 layers80.5 × 28.2 mm

Questions
How big is the ESP32 custom PCB?
It measures 63.7 × 21 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32 custom use?
46 parts, built around the AMS1117-3.3, LESD5D5.0CT1G, KMR621NGLFS and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 custom KiCad files?
From the verma-suraj/ESP32_custom repository on GitHub, at the commit this page was made from: the board is ESP32_custom/ESP32_custom.kicad_pcb and its schematic ESP32_custom/ESP32_custom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 custom design in my own project?
Its repository states no licence, so its author keeps all rights: ask verma-suraj before reusing the design.

