

LoconetEsp32
Esp32 Loconet Interface
- Size
- 92 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 96
- Pads
- 302
- Tracks, vias
- 407, 76
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Apr 2024
- Updated
- 20 Jun 2026
Overview
LoconetEsp32 is an open-source printed circuit board by DccDiyTools, from the DccDiyTools/LoconetEsp32 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 92 × 60 mm with 82 parts on 96 nets, routed with 407 tracks and 76 vias.
It is built around the CP2102N-A01-GQFN28R, ESP32-WROOM-32 and LM2576S-5.0, with the AMS1117-3.3, LM311 and SS8050 among its other parts. Its parts include 31 resistors, 14 diodes, 10 capacitors, 7 transistors and 5 ICs. It belongs with the ESP32 boards of this library.
Main components
12CP2102N-A01-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃ 13.7mA 195uA 3Mbps 3V~3.6V Transceiver USB 2.0 QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM2576S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 3A 4V~40V 52kHz 5V 5mA Buck Built-in Fixed No Step-down type TO-263-5 DC-DC Converters ROHSSlkorDC-DC ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM311
SOP-80℃~+70℃ 1 1.7nA 2.4mA 200ns 2mV 36V 45nA 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHSGcoreComparatorsSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)LESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorisedSS24A
SMA(DO-214AC)Schottky DiodesSUNMATE Elec10118193-0001LF
SMD-55℃~+85℃ 1 1.8A 100V 5P Black Female Micro-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB ConnectorsB330A
SMA(DO-214AC)-55℃~+150℃ 1 Independent 30V 3A 500mV@3A 500uA@30V 80A SMA(DO-214AC) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesBAT760-7
SOD-323Schottky DiodesDOWOLTST-C19HE1WT
1.6x1.6mm-20℃~+80℃ 0.35mm 1.6mm 1.6mm 1.8V~2.4V 112mcd~450mcd 130° 2.8V~3.9V 2.8V~3.9V 20mA 20mA 20mA 28mcd~180mcd 45mcd~180mcd 468nm 470nm 520nm 525nm 624nm 632nm 75mW 80mW 80mW Common Anode White Lens SMD-4P,1.6x1.6mm RGB LEDs ROHSLite-OnLight Emitting Diodes (LED)
README
README.mdLoconetEsp32
Esp32 Loconet Interface
LocoBuffer from LocoLinx32U4
Board for use wiht the [https://github.com/mrrwa/LocoNet/tree/master/examples/LocoLinx32U4] code, there is a copy on this repository for platform.io .
0.0.1
- USB
- Loconet
- Leds loconet
- ESP32
- Btn Reset
0.0.X
- [] Loconet Power
- [] Loconet Master
- [] USB-C
- [] Non-Inv TX
- [] SD
- [] BTN AP
- [] Led Wifi RGB
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K (5%) | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R12, R24, R25, R31 |
| 7 | 470 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R17, R19 |
| 5 | LED | LED_SMD:LED_0805_2012Metric | D1, D3, D7, D8, D9 |
| 4 | 0.1uF/50V(10%) | Capacitor_SMD:C_0805_2012Metric | C1, C4, C5, C7 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R6, R7, R8, R14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 4 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q6, Q7 |
| 4 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2, SW3, SW4 |
| 3 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D10, D11, D12 |
| 3 | SS24A | Diode_SMD:D_SMA | D4, D5, D6 |
| 2 | 0 (5%) | Resistor_SMD:R_0805_2012Metric | R26, R27 |
| 2 | 22uf/10V/20% | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 2K 5% | Resistor_SMD:R_0805_2012Metric | R23, R30 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R20, R22 |
| 2 | RJ12 | LocoNetInterface:AMPHENOL_RJE0166001 | J2, J3 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 100nf | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 100uH | Inductor_SMD:L_Sunlord_MWSA1206S-101 | L1 |
| 1 | 10118193-0001LF | LocoNetInterface:AMPHENOL_10118193-0001LF | J4 |
| 1 | 150K | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 220K | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_8x10.5 | C8 |
| 1 | 220uf | Capacitor_SMD:CP_Elec_8x10.5 | C10 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 22K1 (5%) | Resistor_SMD:R_0805_2012Metric | R28 |
| 1 | 4.7uF/6.3V(10%) | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 47 | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 47K5 (5%) | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | B330A | Diode_SMD:D_SMA | D14 |
| 1 | BAT760-7 | Diode_SMD:D_SOD-323 | D13 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U4 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | LM2576S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U5 |
| 1 | LM311 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LTST-C19HE1WT | LED_SMD:LED_LiteOn_LTST-C19HE1WT | D2 |
| 1 | SD1306 I2C/Oled | LocoNetInterface:128x64OLED | J1 |
More from DccDiyTools/LoconetEsp32
1- 4 layers95 × 71 mm

Similar boards
- 4 layers110 × 90 mm

PLC V1
paulmartinezcuenta/UltiCore-V1-PLC
Custom industrial-grade PLC and logic controller engineered around the ESP32 platform.
202 parts1MIT - 2 layers28.5 × 53.6 mm

- 4 layers80 × 87.6 mm

Lüfterklappenelektronik
realraum/luefterklappensteuerung
Damper Control for ventilation exhaust system in realraum
115 parts - 4 layers29.5 × 56.9 mm

ESP32 Clone
futureshocked/KLP3e_ESP32_development_kit
This is the repository for the "ESP32 Devkit clone" project.
36 parts5 - 4 layers123.3 × 61 mm

- 4 layers68.1 × 75 mm

- 4 layers152.5 × 161.6 mm

MB PCB ControladorESP32
Miguel-Barcelos/Electronics-Projects
Este repositório contém projetos de eletrônica, incluindo circuitos eletrônicos, simulações e design de PCBs.
203 parts - 4 layers32.9 × 50.1 mm

Questions
How big is the LoconetEsp32 PCB?
It measures 92 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the LoconetEsp32 use?
82 parts, built around the CP2102N-A01-GQFN28R, ESP32-WROOM-32, LM2576S-5.0 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoconetEsp32 KiCad files?
From the DccDiyTools/LoconetEsp32 repository on GitHub, at the commit this page was made from: the board is boards/LoconetEsp32/LoconetEsp32.kicad_pcb and its schematic boards/LoconetEsp32/Esp32Supp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoconetEsp32 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).