Skip to the content
12345678

LM311

GcoreExtended

0℃~+70℃ 1 1.7nA 2.4mA 200ns 2mV 36V 45nA 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHS

Part id
gcore/LM311
Category
Comparators
Package
SOP-8
Pins
8
In stock
2,051 at JLCPCB (C18184959)
Used on
149 open-source boards

Overview

The LM311 is a comparator made by Gcore in a SOP-8 package with 8 pins. 0℃~+70℃ 1 1.7nA 2.4mA 200ns 2mV 36V 45nA 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHS.

PCBKit's library has its KiCad symbol (Comparator:LM311, from KiCad's library) and its footprint (Package_SO:SOP-8_3.76x4.96mm_P1.27mm, from KiCad's library), ready for a KiCad board. 2,051 are in stock at JLCPCB (part C18184959). 149 open-source boards in 94 repositories on GitHub use it.

Symbol

GND1+2-3V-4BAL5STRB67V+8
Comparator:LM311From KiCad's library

Footprint

12345678
Package_SO:SOP-8_3.76x4.96mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the LM311
PinNameType
1GNDPassive
2+Input
3-Input
4V-Power in
5BALInput
6STRBInput
7—Open collector
8V+Power in

Open-source boards using it

149See all 149
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers215 × 100 mmCore, the printed circuit board in 3D

    Core

    shmoergh/hog

    Fully analog two-voice monophonic synth for live performances

    370 parts124
  • 4 layers80 × 80 mmZ5524, the printed circuit board in 3D

    Z5524

    brer-rabbit/zoxnoxious

    Analog synth / software interface

    234 parts68GPL-3.0
  • 2 layers216 × 150 mmMotherboard-101, the printed circuit board in 3D

    Motherboard-101

    artemisamsx/artemisa

    Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer

    124 parts67
  • 2 layers101.6 × 147.3 mmKarabas pro revER, the printed circuit board in 3D

    Karabas pro revER

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    223 parts37MIT
  • 2 layers44 × 100 mmHP45 Standalone V4.02, the printed circuit board in 3D

    HP45 Standalone V4.02

    yvodehaas/HP45-standalone-controller-V4.02

    HP45 standalone controller V4.02

    90 parts36GPL-3.0
  • 4 layers55.9 × 78.7 mmSSI2130 VCO, the printed circuit board in 3D

    SSI2130 VCO

    JordanAceto/SSI2130_VCO

    VCO core built around the SSI2130 chip

    106 parts22CC-BY-4.0
  • 2 layers217.2 × 113 mmJunior interface, the printed circuit board in 3D

    Junior interface

    laurent-fr/junior_computer_replica

    A replica of the Junior Computer (a KIM-1 clone) published by Elektor in the 80's

    120 parts14

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM311?

Yes. The symbol is Comparator:LM311 and the footprint Package_SO:SOP-8_3.76x4.96mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM311?

SOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the LM311 datasheet?

Gcore publishes it: the Datasheet link on this page opens it.

Where can I order the LM311?

JLCPCB lists it as part C18184959, with 2,051 in stock; the sellers' links on this page open their listings.

What can replace the LM311?

Parts like it in the library: the LM393 by GOODWORK, the LM393DR98M by GREENMICRO, the LM2903AL1-SR by 3PEAK and the LM2903SR by COSINE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM311?

149 boards in 94 repositories on GitHub; the most starred are listed on this page, with their KiCad files.