Skip to the content

Boards by hkzlab

36 boards

Open-source boards designed in KiCad by hkzlab on GitHub, from 20 repositories. A board’s address here is its repository’s there.

  • 4 layers104.1 × 99.1 mmISA ES1868, the printed circuit board in 3D

    ISA ES1868

    hkzlab/ES1868_ISA8

    ISA 8bit sound card based on the ES1868F sound chip, providing Sound Blaster PRO and OPL3 compatibility in a highly integrated package

    120 parts88
  • 4 layers337.6 × 105.7 mmISA CGA, the printed circuit board in 3D

    ISA CGA

    hkzlab/CGA_Redux

    The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

    170 parts56
  • 2 layers176.5 × 85.1 mmISA EMS, the printed circuit board in 3D

    ISA EMS

    hkzlab/ISA_EMS_4Mb

    ISA 4Mb EMS expansion board

    49 parts41
  • 2 layers131.1 × 108 mmISA EGA CHIPS, the printed circuit board in 3D

    ISA EGA CHIPS

    hkzlab/ISA_EGA_CHIPS

    This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).

    68 parts24
  • 2 layers38.1 × 38.1 mm386 adapter, the printed circuit board in 3D

    386 adapter

    hkzlab/386DX_QFP_PGA_Adapter

    A QFP -> PGA adapter for 386DX CPUs

    4 parts20CC-BY-SA-4.0
  • 2 layers34 × 23.4 mmDWAVE, the printed circuit board in 3D

    DWAVE

    hkzlab/DWAVE_MIDI_Wavetable

    DWAVE is a small General MIDI module for the wavetable connector of your old sound card, based on the SAM2695 chip

    28 parts20
  • 4 layers47 × 62.2 mmTTL2ANALOG, the printed circuit board in 3D

    TTL2ANALOG

    hkzlab/TTL-to-RGB

    This board converts CGA/EGA/MDA/Hercules TTL signals into analog RGB signals that can be fed into a compatible monitor

    33 parts20
  • 2 layers74.3 × 43.8 mmTurboXT, the printed circuit board in 3D

    TurboXT

    hkzlab/TurboXT_Addon

    8Mhz Turbo / Reset addon board for the IBM 5160 (The original XT)

    28 parts15
  • 2 layers170.2 × 78.7 mmROsiM, the printed circuit board in 3D

    ROsiM

    hkzlab/ROsiM

    ROsiM is a ROM simulator/emulator, supporting up to 512k/16bit ROMs

    93 parts11GPL-3.0
  • 2 layers104.1 × 102.9 mmISA QuadUART, the printed circuit board in 3D

    ISA QuadUART

    hkzlab/ISA_QuadUART2

    This 8-bit ISA board will provide 4 serial RS232 ports using a single 16C554 controller. 2 ports are exposed on an external bracket and 2 are on internal headers.

    42 parts9CC-BY-SA-4.0
  • 2 layers38.1 × 85.1 mmPontag, the printed circuit board in 3D

    Pontag

    hkzlab/pontag

    PONTAG is an active adapter that converts a mouse using PS/2 protocol into an RS232 mouse (Microsoft protocol), commonly used on IBM XT/AT and compatibles.

    35 parts9
  • 2 layers59.7 × 45.1 mmEGA2RGBC, the printed circuit board in 3D

    EGA2RGBC

    hkzlab/EGA-2-RGBS

    EPROM based EGA/CGA to analog RGBS converter

    27 parts7CC-BY-SA-4.0
  • 2 layers104.1 × 102.9 mmISA QuadUART, the printed circuit board in 3D

    ISA QuadUART

    hkzlab/ISA_QuadUART

    ISA 8-bit Quad serial adapter

    41 parts5CC-BY-SA-4.0
  • 2 layers37.1 × 17.5 mmKB AT2XT, the printed circuit board in 3D

    KB AT2XT

    hkzlab/Another_AT2XT

    Another AT2XT Keyboard adapter PCB

    9 parts4
  • 2 layers9.5 × 20.6 mmNoCIC, the printed circuit board in 3D

    NoCIC

    hkzlab/NoCIC

    Replacement CIC for NES consoles with reliable reset timing

    15 parts4
  • 2 layers52.8 × 40.4 mmOtterX RamExp, the printed circuit board in 3D

    OtterX RamExp

    hkzlab/OtterX_Ram_Expansion

    RAM Expansion for the OtterX (CommanderX16 compatible) computer

    9 parts3
  • 2 layers33 × 55.9 mmA2E IOU spkr, the printed circuit board in 3D

    A2E IOU spkr

    hkzlab/A2E_IOU_SpeakerReplacement

    Apple IIe IOU Speaker decoding replacement circuitry

    6 parts1CC-BY-SA-4.0
  • 2 layers56.3 × 68 mmPowerReplay, the printed circuit board in 3D

    PowerReplay

    hkzlab/PS1_PowerDeplay_Datel_RE

    Reverse Engineering of a PlayStation 1 Datel clone card

    13 parts1
  • 2 layers104.1 × 106.7 mmMSP MDC, the printed circuit board in 3D

    MSP MDC

    hkzlab/WINK_MSP-MDC_redux

    Reimplementation of the MSP-MDC CPU/Security module for the Wink arcade board by Midcoin

    41 parts
  • 2 layers39.4 × 86.4 mmA500r5 eprom adapter, the printed circuit board in 3D

    A500r5 eprom adapter

    hkzlab/A500_r5-eprom_adapter

    Amiga 500 rev.5 EPROM adapter for 27C020, 27C040 and 27C080

    12 parts15
  • 2 layers39.4 × 57.2 mmPod 27C040, the printed circuit board in 3D

    Pod 27C040

    hkzlab/ROsiM

    ROsiM is a ROM simulator/emulator, supporting up to 512k/16bit ROMs

    13 parts11GPL-3.0
  • 2 layers17.8 × 35.6 mmSocket 27C16, the printed circuit board in 3D

    Socket 27C16

    hkzlab/ROsiM

    ROsiM is a ROM simulator/emulator, supporting up to 512k/16bit ROMs

    2 parts11GPL-3.0