Skip to the content
4 layers104.1 × 99.1 mmISA ES1868, the printed circuit board in 3D

ISA 8bit sound card based on the ES1868F sound chip, providing Sound Blaster PRO and OPL3 compatibility in a highly integrated package

Size
104.1 × 99.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
120
Nets
134
Pads
504
Tracks, vias
1,607, 85
Pours
10
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
19 May 2021
Updated
6 Jul 2026

Overview

ISA ES1868 is an open-source printed circuit board by hkzlab, from the hkzlab/ES1868_ISA8 repository on GitHub. It is a 4-layer board of 104.1 × 99.1 mm with 120 parts on 134 nets, routed with 1,607 tracks and 85 vias.

It is built around the LM1877MX-9, 93LC66/P and L78L05CZ. Its parts include 50 capacitors, 34 resistors, 12 inductors, 9 connectors and 5 ICs. It belongs with the audio and music and retro computing and games boards of this library.

Main components

3

README

README.md

ES1868F 8bit ISA Sound Card

Introduction

This is a sound card for the ISA 8bit bus sporting the ES1868F chip by ESS Technology.

This chip provides Sound Blaster PRO 2.0 (stereo), OPL3 compatibility (via ESFM), MPU-401 support and is considered one of the best chips used in clone cards.

Rev. 1.1 Board

This board provides the following connections:

  • Speaker out (amplified)
  • Line out
  • Line in
  • AUX in (internal header, since rev 1.2)
  • Microphone in (internal header)
  • Joystick port
  • MIDI on Joystick port
  • Wavetable header
  • Volume control header

Disclaimer

I take NO responsibility for what happens if you decide to build and use this card. Your computer might crash, catch fire or be destroyed in other nasty ways. You're encourauged to take what you deem fit from this, and use it in your projects!

Functionalities

✅ means I tested the functionality and it works, ❌ means I tested the functionality and found issues, ? means that the functionality has yet to be tested.

  • [✅] FM Synthesis via OPL3 clone (ESFM)
  • [✅] Digital audio playback
  • [✅] Stereo (left/right channel) check (Tested with Sound Blaster PRO Test program, digitized sound mode)
  • [✅] Joystick port
  • [✅] Speaker Out (amplified)
  • [✅] Line out
  • [✅] Line in
  • [✅] AUX In
  • [?] Microphone in
  • [✅] MIDI output via Joystick port (tested using DOSMID MPU mode on a Roland SC55)
  • [✅] Wavetable daughterboard

The card was tested on:

  • [✅] 286 16Mhz / DOS 6.22
  • [✅] NEC V20 9.54Mhz / DOS 6.22 (Use UNISOUND, see Configuration section below)
  • [✅] NEC V20 4.77Mhz / DOS 6.22 (Use UNISOUND, see Configuration section below)
  • [✅] 8088 8Mhz / DOS 6.22 (Use UNISOUND, see Configuration section below)
  • [✅] 8088 4.77Mhz / DOS 6.22 (Use UNISOUND, see Configuration section below)
  • [✅] 486DX 40Mhz / DOS 7.1 (Use UNISOUND, see Configuration section below)
  • [✅] Am5x86 40/160Mhz / DOS 7.1 (Use UNISOUND, see Configuration section below)

Configuration

This card is jumperless and must be configured before use. Under DOS you can us the ESSCFG tool and tweak the volume via ESSVOL.

The recommended way to do this (especially under a very slow machine, like a V20/8088) is by using the UNISOUND configurator.

It's important to add the /XEA parameter to UNISOUND.COM when using it, and remember to execute it after setting the BLASTER environment variable, for example with the command SET BLASTER=A220 I5 D1 P330 T5 J201 (clearly changing the parameters depending on your setup).

WARNING: If you use an XT-IDE adapter at the default base address (300h), remember to set the MPU-401 base for this card to something else (like 330h)!

Bill of Materials

TODO

Value of L1/L2/L3 ferrite beads is non critical. I used these.

Known Issues

Rev 1.0

  • Joystick plug "J3" silkscreen overlaps with some resistors (fixed in 1.1).
  • The thread in the audio jacks I'm using (Kycon STX-3100-3CB) is flush with the bracket, so if the bracket has some bending, the plug risks to be pushed away (fixed in 1.1 by moving the connectors 0,5mm towards the edge).

Credits

Thanks to Sergey Kiselev for his symbol/footprint library!

Parts

120
QtyValueFootprintReferences
12100nFCapacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mmC1, C2, C3, C4, C5, C6, C7, C11, C17, C40, C41, C53
1010nFCapacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mmC18, C19, C20, C21, C23, C24, C25, C26, C38, C39
102.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4, R5, R6, R8, R9, R10, R11, R12, R13
10220nFCapacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mmC8, C9, C27, C28, C29, C30, C31, C32, C47, C48
710uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC12, C13, C36, C37, C50, C51, C52
7BLM21PG331BH1DInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL4, L5, L6, L7, L8, L9, L12
41MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR34, R35, R36, R37
41kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR14, R15, R16, R17
4820kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR24, R25, R26, R27
310kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7, R32, R33
31nFCapacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mmC10, C33, C46
3FilterInductor_THT:L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1L1, L2, L3
210pFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC15, C16
215kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR30, R31
22.7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR28, R29
233kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR22, R23
2470uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC34, C35
247uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC14, C43
27.5kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2742792093Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL10, L11
1100uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC42
114.318MhzCrystal:Crystal_HC49-U_Horizontal_1EP_style2Y1
1150pFCapacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mmC22
122kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR18
174LS138Package_DIP:DIP-16_W7.62mm_LongPadsU2
193LC66Package_DIP:DIP-8_W7.62mm_LongPadsU4
1AUX_AConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ9
1DRQ2 JumperJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP3
1ES1868FPackage_QFP:LQFP-14x20mm_P0.5mmU3
1IRQ3 JumperJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP5
1IRQ4 JumperJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP6
1ISA BUSskiselev_footprints:Conn_Edge_PCB_ISA8J11
1Intl. ROM 1Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJP1
1Intl. ROM 2Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJP2
1Joystick/MIDICustom_Connectors:SB_DB15_152-3415J3
1L78L05Package_TO_SOT_THT:TO-92_InlineU1
1LINE INMy_Components:Conn_Audio_3.5mm_Stereo_SJ1-352XNGJ1
1LINE OUTMy_Components:Conn_Audio_3.5mm_Stereo_SJ1-352XNGJ2
1LM1877Package_DIP:DIP-14_W7.62mm_LongPadsU7
1MIC INConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ8
1SPKR OUTMy_Components:Conn_Audio_3.5mm_Stereo_SJ1-352XNGJ7
1Vol. BtnsConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ10
1WTBL. P20Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJP7
1WTBL. P24Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJP8
1WavetableConnector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_VerticalJ5
1~{DACK2} JumperJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP4

The 119 most common of 120 parts.

Similar boards

  • 2 layers50.8 × 38.1 mmLk201, the printed circuit board in 3D

    Lk201

    pkoning2/lk201emu

    Emulate DEC LK201 keyboard using a standard PC USB keyboard

    19 parts56BSD-2-Clause
  • 2 layers104 × 73 mmArdf tx, the printed circuit board in 3D

    Ardf tx

    hmatuschek/ardf-tx

    Schematics and firmware for simple ARDF transmitter.

    55 parts5
  • 2 layers32 × 19 mmFan controller, the printed circuit board in 3D

    Fan controller

    flaviut/fan-controller

    a automatic temperature-sensing fan controller

    21 parts2
  • 2 layers99.1 × 99.1 mm4op drum module rev2, the printed circuit board in 3D

    4op drum module rev2

    vk2gpu/4op_drum_synth

    OPL3 based 4-op drum synth module

    117 parts2
  • 4 layers130 × 140 mmPreamp, the printed circuit board in 3D

    Preamp

    djupdal/asd-amp

    275 parts1
  • 2 layers38.5 × 59 mmDual dps-1200FB, the printed circuit board in 3D

    Dual dps-1200FB

    Grobzi/dual-dps-1200FB

    Arduino project for monitoring DPS 1200FB PSUs

    23 parts1GPL-3.0
  • 2 layers119.4 × 83.8 mmSolstrejf voiceboard core, the printed circuit board in 3D

    Solstrejf voiceboard core

    KamikazeVildsvin/Solstrejf

    4 voice analog sinewave drone oscillator with modmatrix

    128 parts1GPL-3.0

Questions

How big is the ISA ES1868 PCB?

It measures 104.1 × 99.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ISA ES1868 use?

120 parts, built around the LM1877MX-9, 93LC66/P and L78L05CZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ISA ES1868 KiCad files?

From the hkzlab/ES1868_ISA8 repository on GitHub, at the commit this page was made from: the board is ISA_ES1868.kicad_pcb and its schematic ISA_ES1868.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ISA ES1868 design in my own project?

Its repository states no licence, so its author keeps all rights: ask hkzlab before reusing the design.