Skip to the content

PIC boards

1,013 boards
  • 2 layersSE ejemplo, the printed circuit board in 3D

    SE ejemplo

    ciruu1/SMA_LAMP

    An embedded systems project

    12 parts
  • 2 layers50 × 50 mmPIC16F1705 MelodyTimer5, the printed circuit board in 3D

    PIC16F1705 MelodyTimer5

    ClockWorks001/PIC16F1705_MelodyTimer5

    This is a simple kitchen/cooking timer by [PIC16F1705][1]. It can choose which of 3 minutes, 5 minutes and 10 minutes. When it became end of time, it sounds a melody.

    26 parts
  • 2 layers50 × 50 mmPIC16F1827 MelodyTimer4, the printed circuit board in 3D

    PIC16F1827 MelodyTimer4

    ClockWorks001/PIC16F1827_MelodyTimer4

    Melody Timer by PIC16F1827

    21 parts
  • 2 layers70 × 70 mmPIC32MX130 SpeakingClock20170301, the printed circuit board in 3D

    PIC32MX130 SpeakingClock20170301

    ClockWorks001/PIC32MX130_SpeakingClock_20170212

    This is a Speaking Clock project with [PIC32MX130 micro controller][2] with [MPLAB.X][3] [MCC][4]. I have created this project using Mr.ChaN's wonderful FatFs program.

    64 parts
  • 2 layers45 × 65 mmElise BDM2, the printed circuit board in 3D

    Elise BDM2

    cloudn1ne/t4e-bdm2-kicad

    11 parts
  • 2 layers25.4 × 25.4 mmPIC Timer, the printed circuit board in 3D

    PIC Timer

    cnkurzke/HelloPIC_Interrupts

    Sample code for the PIC 12F1572 interrupt handling

    25 partsBSD-2-Clause
  • 2 layers50 × 50 mmPIC32, the printed circuit board in 3D

    PIC32

    Cole-Abbott/ME433

    Repo for ME 433, Cole Abbott

    23 parts
  • 2 layers133.9 × 50.3 mmPower Sense 3.0, the printed circuit board in 3D

    Power Sense 3.0

    CollabEMMS/_EMMS_PCB_PowerSense

    47 parts
  • 2 layers98 × 50.3 mmPower Sense 3.0, the printed circuit board in 3D

    Power Sense 3.0

    CollabEMMS/Power_Sense_3.0

    Power Sense 3.0 Sch, PCB, and lib

    45 parts
  • 2 layers96 × 90 mmMaster schematic, the printed circuit board in 3D

    Master schematic

    coloradocube/balloonsat-bus

    DEPRECATED

    80 parts
  • 2 layers96.5 × 90.7 mmColoradoCUBE Payload, the printed circuit board in 3D

    ColoradoCUBE Payload

    coloradocube/bus-sensors

    A separate board containing the sensors for the satellite bus. The sensors are the telemetry data sources.

    58 parts
  • 2 layers91.2 × 101.1 mmDIJOUS 4 PORTES, the printed circuit board in 3D

    DIJOUS 4 PORTES

    cooligula/DIJOUS_4_PORTES

    66 parts
  • 2 layers35.6 × 15.2 mmPic beeper, the printed circuit board in 3D

    Pic beeper

    CoolNamesAllTaken/pic-beeper

    Horribly annoying beeper made with a PIC12F752

    17 parts
  • 2 layers39.6 × 54.9 mmJoystick, the printed circuit board in 3D

    Joystick

    costarc/CP400_COLOR_FPGA

    PCB Kit (modular) to fit the Brazilian CP 400 Color case

    29 partsGPL-3.0
  • 2 layers110.5 × 80 mmDigital clock, the printed circuit board in 3D

    Digital clock

    creyes2001/digital-clock

    Bare-metal digital clock firmware for PIC18F4550 with multiplexed 7-segment display, EEPROM time storage, and cooperative scheduler.

    40 parts
  • 2 layersLidar, the printed circuit board in 3D

    Lidar

    CRLG/HW_LIDAR

    Carte électronique du LIDAR CRLG

    47 partsGPL-3.0
  • 2 layers65 × 56 mmRPI Peripheral Expander, the printed circuit board in 3D

    RPI Peripheral Expander

    CRLG/HW_RPI_DSPIC_EXPANDER

    Extension dsPIC (GPIO / analog / codeur) pour Raspberry Pi

    66 partsGPL-3.0
  • 2 layers100 × 100 mmCan ssr, the printed circuit board in 3D

    Can ssr

    czalinski/ThlHats

    Test devices with Raspberry PI HAT form factor

    201 partsMIT
  • 2 layers175 × 120 mmJackOfAllTradesV2p0, the printed circuit board in 3D

    JackOfAllTradesV2p0

    czalinski/ThlHwTestDevices

    KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.

    172 partsMIT
  • 2 layers118.7 × 168.3 mmDMClockPanel, the printed circuit board in 3D

    DMClockPanel

    danielpchamoun/DMClock

    207 parts
  • 2 layers108 × 93 mmHd2, the printed circuit board in 3D

    Hd2

    Danjovic/FreeHD300

    Emulador de HD para CP300

    62 partsGPL-2.0
  • 2 layers102.9 × 99.1 mmDCC Booster, the printed circuit board in 3D

    DCC Booster

    DavidMFlynn/DCC-Booster

    DCC Booster

    130 partsGPL-3.0
  • 2 layers22.9 × 48.3 mmPICtoEasyD, the printed circuit board in 3D

    PICtoEasyD

    DavidMFlynn/PIC_Class

    Files from sgvTech meetup

    25 parts