4 layers36 × 50.2 mm
Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
83 parts3.8kApache-2.0
2 layers35.6 × 15.2 mm
Pic beeper
CoolNamesAllTaken/pic-beeperHorribly annoying beeper made with a PIC12F752
- Size
- 35.6 × 15.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 11
- Pads
- 57
- Tracks, vias
- 94, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 May 2019
- Updated
- 2 Aug 2020
Overview
Pic beeper is an open-source printed circuit board by CoolNamesAllTaken, from the CoolNamesAllTaken/pic-beeper repository on GitHub. It is a 2-layer board of 35.6 × 15.2 mm with 17 parts on 11 nets, routed with 94 tracks and 21 vias.
It is built around the PIC12F752-E/P and BSS138. Its parts include 4 connectors, 3 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the PIC boards of this library.
Main components
2
PIC12F752-E/P
PDIP-8-40℃~+125℃ 1.75KB 20MHz 2V~5.5V 5 64Byte 8 Bit Built-in FLASH PIC PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdpic-beeper
Horribly annoying beeper made with a PIC12F752
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 16R | Buzzer_Beeper:PUIAudio_SMT_0825_S_4_R | BZ1 |
| 1 | 40V 5A | Diode_SMD:D_SMA | D1 |
| 1 | 680R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | lib_fp:PIC_ICSP_Pads_01x06 | J1 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | JST_PH_01x02_Male_RightAngle | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LOGO | lib_fp:bird_with_pants_small | G*** |
| 1 | LOGO | lib_fp:bird_with_pants_small_flipped | G*** |
| 1 | Open Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | PIC12F752 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U1 |
| 1 | SW_SPDT | lib_fp:SW_SPDT_SK3296 | SW1 |
Similar boards
- 4 layers95 × 95 mm
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers44.2 × 29.3 mm
- 4 layers142.2 × 82.6 mm
A10-A20-OLINUXINO MICRO-4GB Rev D
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
558 parts429GPL-2.0 - 2 layers21.6 × 52.3 mm
Ps2 pico hat
No0ne/ps2x2pico
USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico
17 parts399MIT - 2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
61 parts379Apache-2.0 - 4 layers74 × 104 mm
Questions
How big is the Pic beeper PCB?
It measures 35.6 × 15.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pic beeper use?
17 parts, built around the PIC12F752-E/P and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pic beeper KiCad files?
From the CoolNamesAllTaken/pic-beeper repository on GitHub, at the commit this page was made from: the board is pic_beeper/pic_beeper.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pic beeper design in my own project?
Its repository states no licence, so its author keeps all rights: ask CoolNamesAllTaken before reusing the design.