

Stm32f4 Centaurus
UUKHAI !!
- Size
- 100 × 79 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 207
- Nets
- 229
- Pads
- 734
- Tracks, vias
- 2,069, 560
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Mar 2022
- Updated
- 19 Jan 2021
Overview
Stm32f4 Centaurus is an open-source printed circuit board by danielmuthama, from the danielmuthama/NHK_RC19_PCBs repository on GitHub. It is a 2-layer board of 100 × 79 mm with 207 parts on 229 nets, routed with 2,069 tracks and 560 vias.
It is built around the PIC24FJ64GB004-I/ML, STM32F407VGT6 and MCP2221A-I/P, with the MAX3051EKA, 25LC010A-E/P and OSTBABS4C2B among its other parts. Its parts include 67 resistors, 41 capacitors, 36 diodes, 24 connectors and 13 ICs. It belongs with the STM32 and PIC boards of this library.
Main components
6PIC24FJ64GB004-I/ML
QFN-44-EP(8x8)-40℃~+85℃ 10bit 16 Bit 2V~3.6V 32MHz 33 64KB 8KB Built-in FLASH PIC QFN-44-EP(8x8) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)STM32F407VGT6
LQFP-100(14x14)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MCP2221A-I/P
PDIP-14-40℃~+85℃ 13mA 3V~5.5V 46uA USB 2.0 USB to UART、USB to I2C PDIP-14 USB Converters ROHSMicrochip TechnologyUSB ConvertersMAX3051EKA
UncategorisedMaxim Integrated Products25LC010A-E/P
PDIP-8-40℃~+125℃ 10MHz 1Kbit 2.5V~5.5V 5ms SPI PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROMOSTBABS4C2B
LED5050UncategorisedOptoSupply
README
README.mdRC19_Circuit
知識不足て設計したものが多々あるため,非常に残念な基板が多いです…
Parts
207| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 0.1u | Mizz_lib:C_0603 | C2, C3, C10, C12, C14, C15, C16, C17, C18, C20, C21, C24, C25, C28, C33, C36 +10 |
| 18 | DIODE | Mizz_lib:SOD-123 | D6, D7, D10, D11, D12, D14, D15, D20, D26, D27, D28, D29, D32, D38, D39, D40 +2 |
| 16 | 330 | Mizz_lib:R_0603 | R2, R3, R17, R22, R23, R24, R46, R47, R48, R49, R57, R58, R59, R60, R61, R72 |
| 15 | 10k | Mizz_lib:R_0603 | R1, R12, R25, R26, R28, R30, R36, R45, R50, R52, R54, R55, R56, R69, R71 |
| 8 | 100 | Mizz_lib:R_0603 | R4, R5, R6, R7, R13, R14, R15, R16 |
| 8 | 1k | Mizz_lib:R_0603 | R8, R9, R10, R11, R18, R19, R20, R21 |
| 7 | 1u | Mizz_lib:C_0603 | C1, C19, C22, C23, C29, C30, C34 |
| 6 | LED | Mizz_lib:LED_0603 | D19, D21, D22, D23, D24, D25 |
| 5 | 10 | Mizz_lib:R_0603 | R42, R51, R62, R63, R64 |
| 4 | 1.2k | Mizz_lib:R_0603 | R33, R66, R67, R68 |
| 4 | 120 | Mizz_lib:R_0603 | R40, R41, R43, R53 |
| 4 | 510 | Mizz_lib:R_0603 | R34, R37, R44, R65 |
| 4 | FET_P | Mizz_lib:SOT-23 | Q1, Q2, Q3, Q6 |
| 3 | 10u | Mizz_lib:C_0603 | C6, C7, C31 |
| 2 | 2.2u | Mizz_lib:C_0603 | C26, C27 |
| 2 | 22p | Mizz_lib:C_0603 | C11, C13 |
| 2 | MAX3051 | Mizz_lib:SOIC-8_3.9x4.9mm_Pitch1.27mm | U5, U6 |
| 2 | NPN | Mizz_lib:SOT-123 | Q4, Q5 |
| 2 | R_JP | Mizz_lib:R_0603 | R38, R39 |
| 1 | 12V_to_5V | Mizz_lib:LED_0603 | D17 |
| 1 | 22uH | Mizz_lib:Inductor_Taiyo-Yuden_NR-50xx_HandSoldering | L1 |
| 1 | 25LC010A | Mizz_lib:DIP-8_W7.62mm | U12 |
| 1 | 3.3V | Mizz_lib:LED_0603 | D31 |
| 1 | 4.7u | Mizz_lib:C_0603 | C35 |
| 1 | 50k | Mizz_lib:R_0603 | R35 |
| 1 | 5V | Mizz_lib:LED_0603 | D30 |
| 1 | 8MHz | Mizz_lib:Crystal_SMD_5032_2Pads | X1 |
| 1 | A/D | Mizz_lib:Pin_Header_Straight_1x10 | P23 |
| 1 | A/D_batt | Mizz_lib:Pin_Header_Straight_2x10 | P25 |
| 1 | AP3211 | Mizz_lib:TSOT-6-MK06A | U4 |
| 1 | AQM1602_BL | Mizz_lib:AQM1602_BL_Fad | U7 |
| 1 | AZ1086H | Mizz_lib:AZ1086H | U2 |
| 1 | BUS_5V | Mizz_lib:LED_0603 | D18 |
| 1 | CAN0 | Mizz_lib:XA_4T | P11 |
| 1 | CAN0 | Mizz_lib:XA_4LC | P13 |
| 1 | CAN0_BUS | Mizz_lib:LED_0603 | D36 |
| 1 | CAN0_JP | Mizz_lib:Pin_Header_Straight_1x02 | JP1 |
| 1 | CAN1 | Mizz_lib:XA_4T | P12 |
| 1 | CAN1 | Mizz_lib:XA_4LC | P14 |
| 1 | CAN1_BUS | Mizz_lib:LED_0603 | D37 |
| 1 | CAN1_JP | Mizz_lib:Pin_Header_Straight_1x02 | JP2 |
| 1 | COMM | Mizz_lib:LED_0603 | D2 |
| 1 | DATA | Mizz_lib:LED_0603 | D1 |
| 1 | EMERGENCY_CHECK | Mizz_lib:XA_4LC | P27 |
| 1 | ENC0 | Mizz_lib:XA_4T | P3 |
| 1 | ENC1 | Mizz_lib:XA_4T | P7 |
| 1 | ENC2 | Mizz_lib:XA_4T | P4 |
| 1 | ENC3 | Mizz_lib:XA_4T | P6 |
| 1 | FET_N | Mizz_lib:SOT-23 | Q7 |
| 1 | I/O_5V | Mizz_lib:Pin_Header_Straight_1x04 | P28 |
| 1 | I/O_5V_batt | Mizz_lib:Pin_Header_Straight_2x04 | P30 |
| 1 | I/O_Variable | Mizz_lib:Pin_Header_Straight_2x04 | P31 |
| 1 | I/O_Variable | Mizz_lib:Pin_Header_Straight_1x04 | P29 |
| 1 | I/O_Vdd | Mizz_lib:Pin_Header_Straight_1x03 | JP5 |
| 1 | LOGO | Mizz_lib:Robocon2019_30.0x30.0_silk | U13 |
| 1 | LOGO | Mizz_lib:Mini_Monster | U9 |
| 1 | LOGO | Mizz_lib:kitLogo_Mask_5.0x5.0 | U10 |
| 1 | MCP2221A | Mizz_lib:SOIC-14_3.9x8.7mm_Pitch1.27mm | U3 |
| 1 | Main_POWER | Buttons_Switches_ThroughHole:SW_Micro_SPST | SW1 |
| 1 | OSTBABS4C2B | Mizz_lib:OSTBABS4C2B | U8 |
| 1 | PIC24FJ64GB004 | Mizz_lib:LQFP-44_10x10mm_Pitch0.8mm | IC1 |
| 1 | PICKit3 | Mizz_lib:ZH_6T | P1 |
| 1 | PICKit_JP | Mizz_lib:GS2 | JP4 |
| 1 | PWM | Mizz_lib:Pin_Header_Straight_1x10 | P24 |
| 1 | PWM_batt | Mizz_lib:Pin_Header_Straight_2x10 | P26 |
| 1 | RESET | Mizz_lib:TSHD | LED1 |
| 1 | SERIAL0 | Mizz_lib:XA_4T | P16 |
| 1 | SERIAL1 | Mizz_lib:USB_Micro-B_Molex_47346-0001 | P5 |
| 1 | SERIAL1_ACTIVE | Mizz_lib:LED_0603 | D5 |
| 1 | SERIAL1_RX | Mizz_lib:LED_0603 | D4 |
| 1 | SERIAL1_TX | Mizz_lib:LED_0603 | D3 |
| 1 | SERIAL2 | Mizz_lib:XA_4T | P15 |
| 1 | SERIAL3 | Mizz_lib:XA_4T | P9 |
| 1 | SERIAL4 | Mizz_lib:XA_4T | P8 |
| 1 | SERIAL5_SBDBT | Mizz_lib:USB_A | P2 |
| 1 | SPEAKER | Mizz_lib:UGCT7525AN4 | SP1 |
| 1 | STM32F407VG | Mizz_lib:TQFP-100_14x14mm_Pitch0.5mm | U1 |
| 1 | SW0 | Mizz_lib:SW_SPST_PTS645 | SW3 |
| 1 | SW1 | Mizz_lib:SW_SPST_PTS645 | SW2 |
| 1 | SW2 | Mizz_lib:SW_SPST_PTS645 | SW4 |
The 199 most common of 207 parts.
More from danielmuthama/NHK_RC19_PCBs
12- 2 layers100 × 95 mm

- 2 layers100 × 77 mm

- 2 layers88.8 × 34 mm

- 2 layers70 × 60 mm

- 2 layers70 × 60 mm

- 2 layers70 × 60 mm

- 2 layers80 × 70.8 mm

- 2 layers86.3 × 67.8 mm

- 2 layers70 × 60 mm

- 2 layers80 × 55 mm

- 2 layers

- 2 layers21.5 × 20.5 mm

Similar boards
- 2 layers86 × 86 mm

Production
kerikun11/IR-Station
Infrared Remote Controller with ESP8266 WiFi-module. You can control your home appliances with your smartphone or laptop.
128 parts54MIT - 2 layers83 × 100 mm

- 2 layers49.5 × 49.5 mm

- 2 layers74.9 × 89.2 mm

Pictas
bigbass1997/PICTAS
Low-cost replay device for playing back Tool Assisted Speedruns on real hardware
37 parts9 - 2 layers63.5 × 45.5 mm

F ramune avr
obskyr/f-ramune
A device for testing and programming FRAM chips! Finally you can be sure that FRAM you bought from China works.
27 parts6 - 2 layers44.1 × 82.7 mm

Remote64-controller
bigbass1997/remote64
Provides a method for N64 homebrew developers to test their roms on remote hardware
20 parts4 - 2 layers60 × 100 mm

- 2 layers39.4 × 20.3 mm

Questions
How big is the Stm32f4 Centaurus PCB?
It measures 100 × 79 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm32f4 Centaurus use?
207 parts, built around the PIC24FJ64GB004-I/ML, STM32F407VGT6, MCP2221A-I/P and MAX3051EKA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32f4 Centaurus KiCad files?
From the danielmuthama/NHK_RC19_PCBs repository on GitHub, at the commit this page was made from: the board is stm32f4_Centaurus_ver.1.1/stm32f4_Centaurus/stm32f4_Centaurus.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32f4 Centaurus design in my own project?
Its repository states no licence, so its author keeps all rights: ask danielmuthama before reusing the design.