
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
STMicroelectronicsExtended
-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS
The STM32F407VGT6 is a microcontroller made by STMicroelectronics in a LQFP-100(14x14) package with 100 pins. -40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F4:STM32F407VGTx, from KiCad's library) and its footprint (Package_QFP:LQFP-100_14x14mm_P0.5mm, from KiCad's library), ready for a KiCad board. 10,161 are in stock at JLCPCB (part C12345). 32 open-source boards in 26 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDDA, VDD) VDD–VSS | Absolute maximum | min -0.3 · max 4 V | 78 |
| Input voltage on any other pin VIN | Min VSS–0.3; absolute maximum | max 4 V | 78 |
| Variations between different VDD power pins |ΔVDDx| | Absolute maximum | max 50 mV | 78 |
| Variations between all the different ground pins including VREF− |VSSX − VSS| | Absolute maximum | max 50 mV | 78 |
| Total current into VDD power lines (source) IVDD | Absolute maximum | max 240 mA | 79 |
| Total current out of VSS ground lines (sink) IVSS | Absolute maximum | max 240 mA | 79 |
| Output current sunk by any I/O and control pin IIO | Absolute maximum | max 25 mA | 79 |
| Output current source by any I/Os and control pin IIO | Absolute maximum | max 25 mA | 79 |
| Injected current on five-volt tolerant I/O IINJ(PIN) | Absolute maximum; negative/positive limits | min -5 · max 0 mA | 79 |
| Injected current on any other pin IINJ(PIN) | Absolute maximum; ±5 | min -5 · max 5 mA | 79 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute maximum; ±25 | min -25 · max 25 mA | 79 |
| Storage temperature range TSTG | Absolute maximum | min -65 · max 150 °C | 79 |
| Maximum junction temperature TJ | Absolute maximum | max 125 °C | 79 |
| Internal AHB clock frequency fHCLK | VOS bit in PWR_CR register = 0 | min 0 · max 144 MHz | 79 |
| Internal AHB clock frequency fHCLK | VOS bit in PWR_CR register = 1 | min 0 · max 168 MHz | 79 |
| Internal APB1 clock frequency fPCLK1 | min 0 · max 42 MHz | 79 | |
| Internal APB2 clock frequency fPCLK2 | min 0 · max 84 MHz | 79 | |
| Standard operating voltage VDD | min 1.8 · max 3.6 V | 79 | |
| Analog operating voltage (ADC limited to 1.2 M samples) VDDA | Must be the same potential as VDD | min 1.8 · max 2.4 V | 79 |
| Analog operating voltage (ADC limited to 1.4 M samples) VDDA | Must be the same potential as VDD | min 2.4 · max 3.6 V | 79 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 79 | |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | VOS bit in PWR_CR register = 0; max frequency 144MHz | min 1.08 · typ 1.14 · max 1.2 V | 80 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | VOS bit in PWR_CR register = 1; max frequency 168MHz | min 1.2 · typ 1.26 · max 1.32 V | 80 |
| Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12 | Max frequency 144MHz | min 1.1 · typ 1.14 · max 1.2 V | 80 |
| Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12 | Max frequency 168MHz | min 1.2 · typ 1.26 · max 1.3 V | 80 |
| Input voltage on RST and FT pins VIN | 2 V ≤ VDD ≤ 3.6 V | min -0.3 · max 5.5 V | 80 |
| Input voltage on RST and FT pins VIN | VDD ≤ 2 V | min -0.3 · max 5.2 V | 80 |
| Input voltage on TTa pins VIN | Max VDDA+0.3 V | min -0.3 V | 80 |
| Input voltage on B pin VIN | max 5.5 V | 80 | |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | LQFP100; suffix 6 at TA = 85 °C | max 465 mW | 80 |
| Ambient temperature for 6 suffix version TA | Maximum power dissipation | min -40 · max 85 °C | 80 |
| Ambient temperature for 6 suffix version TA | Low-power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 80 |
| Junction temperature range TJ | 6 suffix version | min -40 · max 105 °C | 80 |
| ESR of external capacitor ESR | ESR <2Ω | max 2 Ω | 82 |
| VDD rise time rate tVDD | Maximum ∞ | min 20 us/V | 82 |
| VDD fall time rate tVDD | Maximum ∞ | min 20 us/V | 82 |
| VDD rise time rate tVDD | Power-up; maximum ∞ | min 20 us/V | 82 |
| VDD fall time rate tVDD | Power-down; maximum ∞ | min 20 us/V | 82 |
| VCAP_1 and VCAP_2 rise time rate tVCAP | Power-up; maximum ∞ | min 20 us/V | 82 |
| VCAP_1 and VCAP_2 fall time rate tVCAP | Power-down; maximum ∞ | min 20 us/V | 82 |
| Brownout level 2 threshold VBOR2 | Falling edge | min 2.44 · typ 2.5 · max 2.56 V | 84 |
| Brownout level 2 threshold VBOR2 | Rising edge | min 2.53 · typ 2.59 · max 2.63 V | 84 |
| Brownout level 3 threshold VBOR3 | Falling edge | min 2.75 · typ 2.83 · max 2.88 V | 84 |
| Brownout level 3 threshold VBOR3 | Rising edge | min 2.85 · typ 2.92 · max 2.97 V | 84 |
| BOR hysteresis VBORhyst | typ 100 mV | 84 | |
| Reset temporization TRSTTEMPO | min 0.5 · typ 1.5 · max 3 ms | 84 | |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH | typ 160 · max 200 mA | 84 | |
| InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH | VDD = 1.8 V, TA = 105 °C, IRUSH = 171 mA for 31 us | max 5.4 uC | 84 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 168 MHz; typ TA = 25 °C; max TA = 85 °C | typ 87 · max 102 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 168 MHz; TA = 105 °C | max 109 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 144 MHz; typ TA = 25 °C; max TA = 85 °C | typ 67 · max 80 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 144 MHz; TA = 105 °C | max 86 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 120 MHz; typ TA = 25 °C; max TA = 85 °C | typ 56 · max 69 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 120 MHz; TA = 105 °C | max 75 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 90 MHz; typ TA = 25 °C; max TA = 85 °C | typ 44 · max 56 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 90 MHz; TA = 105 °C | max 62 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 60 MHz; typ TA = 25 °C; max TA = 85 °C | typ 30 · max 42 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 60 MHz; TA = 105 °C | max 49 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 30 MHz; typ TA = 25 °C; max TA = 85 °C | typ 16 · max 28 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 30 MHz; TA = 105 °C | max 35 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 25 MHz; typ TA = 25 °C; max TA = 85 °C | typ 12 · max 24 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 25 MHz; TA = 105 °C | max 31 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 16 MHz, HCLK = system clock/2; typ TA = 25 °C; max TA = 85 °C | typ 9 · max 20 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 16 MHz, HCLK = system clock/2; TA = 105 °C | max 28 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 8 MHz; typ TA = 25 °C; max TA = 85 °C | typ 5 · max 17 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 8 MHz; TA = 105 °C | max 24 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 4 MHz; typ TA = 25 °C; max TA = 85 °C | typ 3 · max 15 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 4 MHz; TA = 105 °C | max 22 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 2 MHz; typ TA = 25 °C; max TA = 85 °C | typ 2 · max 14 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 2 MHz; TA = 105 °C | max 21 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 168 MHz; typ TA = 25 °C; max TA = 85 °C | typ 40 · max 54 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 168 MHz; TA = 105 °C | max 61 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 144 MHz; typ TA = 25 °C; max TA = 85 °C | typ 31 · max 43 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 144 MHz; TA = 105 °C | max 50 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 120 MHz; typ TA = 25 °C; max TA = 85 °C | typ 26 · max 38 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 120 MHz; TA = 105 °C | max 45 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 90 MHz; typ TA = 25 °C; max TA = 85 °C | typ 20 · max 32 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 90 MHz; TA = 105 °C | max 39 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 60 MHz; typ TA = 25 °C; max TA = 85 °C | typ 14 · max 26 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 60 MHz; TA = 105 °C | max 33 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 30 MHz; typ TA = 25 °C; max TA = 85 °C | typ 8 · max 20 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 30 MHz; TA = 105 °C | max 27 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 25 MHz; typ TA = 25 °C; max TA = 85 °C | typ 6 · max 18 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 25 MHz; TA = 105 °C | max 25 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 16 MHz, HCLK = system clock/2; typ TA = 25 °C; max TA = 85 °C | typ 5 · max 16 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 16 MHz, HCLK = system clock/2; TA = 105 °C | max 24 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 8 MHz; typ TA = 25 °C; max TA = 85 °C | typ 3 · max 15 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 8 MHz; TA = 105 °C | max 22 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 4 MHz; typ TA = 25 °C; max TA = 85 °C | typ 2 · max 14 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 4 MHz; TA = 105 °C | max 21 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 2 MHz; typ TA = 25 °C; max TA = 85 °C | typ 2 · max 14 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 2 MHz; TA = 105 °C | max 21 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 168 MHz; typ TA = 25 °C; max TA = 85 °C | typ 93 · max 109 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 168 MHz; TA = 105 °C | max 117 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 144 MHz; typ TA = 25 °C; max TA = 85 °C | typ 76 · max 89 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 144 MHz; TA = 105 °C | max 96 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 120 MHz; typ TA = 25 °C; max TA = 85 °C | typ 67 · max 79 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 120 MHz; TA = 105 °C | max 86 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 90 MHz; typ TA = 25 °C; max TA = 85 °C | typ 53 · max 65 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 90 MHz; TA = 105 °C | max 73 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 60 MHz; typ TA = 25 °C; max TA = 85 °C | typ 37 · max 49 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 60 MHz; TA = 105 °C | max 56 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 30 MHz; typ TA = 25 °C; max TA = 85 °C | typ 20 · max 32 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 30 MHz; TA = 105 °C | max 39 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 25 MHz; typ TA = 25 °C; max TA = 85 °C | typ 16 · max 27 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 25 MHz; TA = 105 °C | max 35 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 16 MHz; typ TA = 25 °C; max TA = 85 °C | typ 11 · max 23 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 16 MHz; TA = 105 °C | max 30 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 8 MHz; typ TA = 25 °C; max TA = 85 °C | typ 6 · max 18 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 8 MHz; TA = 105 °C | max 25 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 4 MHz; typ TA = 25 °C; max TA = 85 °C | typ 4 · max 16 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 4 MHz; TA = 105 °C | max 23 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 2 MHz; typ TA = 25 °C; max TA = 85 °C | typ 3 · max 15 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled, 2 MHz; TA = 105 °C | max 22 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 168 MHz; typ TA = 25 °C; max TA = 85 °C | typ 46 · max 61 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 168 MHz; TA = 105 °C | max 69 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 144 MHz; typ TA = 25 °C; max TA = 85 °C | typ 40 · max 52 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 144 MHz; TA = 105 °C | max 60 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 120 MHz; typ TA = 25 °C; max TA = 85 °C | typ 37 · max 48 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 120 MHz; TA = 105 °C | max 56 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 90 MHz; typ TA = 25 °C; max TA = 85 °C | typ 30 · max 42 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 90 MHz; TA = 105 °C | max 50 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 60 MHz; typ TA = 25 °C; max TA = 85 °C | typ 22 · max 33 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 60 MHz; TA = 105 °C | max 41 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 30 MHz; typ TA = 25 °C; max TA = 85 °C | typ 12 · max 24 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 30 MHz; TA = 105 °C | max 31 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 25 MHz; typ TA = 25 °C; max TA = 85 °C | typ 10 · max 21 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 25 MHz; TA = 105 °C | max 29 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 16 MHz; typ TA = 25 °C; max TA = 85 °C | typ 7 · max 19 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 16 MHz; TA = 105 °C | max 26 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 8 MHz; typ TA = 25 °C; max TA = 85 °C | typ 4 · max 16 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 8 MHz; TA = 105 °C | max 23 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 4 MHz; typ TA = 25 °C; max TA = 85 °C | typ 3 · max 15 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled, 4 MHz; TA = 105 °C | max 22 mA | 86 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 168 MHz; typ TA = 25 °C; max TA = 85 °C | typ 59 · max 77 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 168 MHz; TA = 105 °C | max 84 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 144 MHz; typ TA = 25 °C; max TA = 85 °C | typ 46 · max 61 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 144 MHz; TA = 105 °C | max 67 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 120 MHz; typ TA = 25 °C; max TA = 85 °C | typ 38 · max 53 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 120 MHz; TA = 105 °C | max 60 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 90 MHz; typ TA = 25 °C; max TA = 85 °C | typ 30 · max 44 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 90 MHz; TA = 105 °C | max 51 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 60 MHz; typ TA = 25 °C; max TA = 85 °C | typ 20 · max 34 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 60 MHz; TA = 105 °C | max 41 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 30 MHz; typ TA = 25 °C; max TA = 85 °C | typ 11 · max 24 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 30 MHz; TA = 105 °C | max 31 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 25 MHz; typ TA = 25 °C; max TA = 85 °C | typ 8 · max 21 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 25 MHz; TA = 105 °C | max 28 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 16 MHz; typ TA = 25 °C; max TA = 85 °C | typ 6 · max 18 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 16 MHz; TA = 105 °C | max 25 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 8 MHz; typ TA = 25 °C; max TA = 85 °C | typ 3 · max 16 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 8 MHz; TA = 105 °C | max 23 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 4 MHz; typ TA = 25 °C; max TA = 85 °C | typ 2 · max 15 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 4 MHz; TA = 105 °C | max 22 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 2 MHz; typ TA = 25 °C; max TA = 85 °C | typ 2 · max 14 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled, 2 MHz; TA = 105 °C | max 21 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 168 MHz; typ TA = 25 °C; max TA = 85 °C | typ 12 · max 27 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 168 MHz; TA = 105 °C | max 35 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 144 MHz; typ TA = 25 °C; max TA = 85 °C | typ 9 · max 22 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 144 MHz; TA = 105 °C | max 29 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 120 MHz; typ TA = 25 °C; max TA = 85 °C | typ 8 · max 20 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 120 MHz; TA = 105 °C | max 28 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 90 MHz; typ TA = 25 °C; max TA = 85 °C | typ 7 · max 19 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 90 MHz; TA = 105 °C | max 26 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 60 MHz; typ TA = 25 °C; max TA = 85 °C | typ 5 · max 17 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 60 MHz; TA = 105 °C | max 24 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 30 MHz; typ TA = 25 °C; max TA = 85 °C | typ 3 · max 16 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 30 MHz; TA = 105 °C | max 23 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 25 MHz; typ TA = 25 °C; max TA = 85 °C | typ 2 · max 15 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 25 MHz; TA = 105 °C | max 22 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 16 MHz; typ TA = 25 °C; max TA = 85 °C | typ 2 · max 14 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 16 MHz; TA = 105 °C | max 21 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 8 MHz; typ TA = 25 °C; max TA = 85 °C | typ 1 · max 14 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 8 MHz; TA = 105 °C | max 21 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 4 MHz; typ TA = 25 °C; max TA = 85 °C | typ 1 · max 13 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 4 MHz; TA = 105 °C | max 21 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 2 MHz; typ TA = 25 °C; max TA = 85 °C | typ 1 · max 13 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled, 2 MHz; TA = 105 °C | max 21 mA | 89 |
| Supply current in Stop mode with main regulator in Run mode IDD_STOP | Flash in Deep power-down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 25 °C | typ 0.4 · max 1.5 mA | 90 |
| Supply current in Stop mode with main regulator in Run mode IDD_STOP | Flash in Deep power-down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °C | max 11 mA | 90 |
| Supply current in Stop mode with main regulator in Run mode IDD_STOP | Flash in Deep power-down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 105 °C | max 20 mA | 90 |
| Supply current in Stop mode with main regulator in Low-power mode IDD_STOP | Flash in Stop mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 25 °C | typ 0.31 · max 1.1 mA | 90 |
| Supply current in Stop mode with main regulator in Low-power mode IDD_STOP | Flash in Stop mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °C | max 8 mA | 90 |
| Supply current in Stop mode with main regulator in Low-power mode IDD_STOP | Flash in Stop mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 105 °C | max 15 mA | 90 |
| Supply current in Stop mode with main regulator in Low-power mode IDD_STOP | Flash in Deep power-down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 25 °C | typ 0.28 · max 1.1 mA | 90 |
| Supply current in Stop mode with main regulator in Low-power mode IDD_STOP | Flash in Deep power-down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °C | max 8 mA | 90 |
| Supply current in Stop mode with main regulator in Low-power mode IDD_STOP | Flash in Deep power-down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 105 °C | max 15 mA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 1.8 V | typ 3 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 2.4 V | typ 3.4 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 3.3 V | typ 4 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 85 °C; VDD = 3.6 V | max 20 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 105 °C; VDD = 3.6 V | max 36 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 1.8 V | typ 2.4 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 2.4 V | typ 2.7 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 3.3 V | typ 3.3 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 85 °C; VDD = 3.6 V | max 16 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 105 °C; VDD = 3.6 V | max 32 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC OFF; TA = 25 °C; VDD = 1.8 V | typ 2.4 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC OFF; TA = 25 °C; VDD = 2.4 V | typ 2.6 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC OFF; TA = 25 °C; VDD = 3.3 V | typ 3 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC OFF; TA = 85 °C; VDD = 3.6 V | max 12.5 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC OFF; TA = 105 °C; VDD = 3.6 V | max 24.8 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC OFF; TA = 25 °C; VDD = 1.8 V | typ 1.7 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC OFF; TA = 25 °C; VDD = 2.4 V | typ 1.9 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC OFF; TA = 25 °C; VDD = 3.3 V | typ 2.2 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC OFF; TA = 85 °C; VDD = 3.6 V | max 9.8 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC OFF; TA = 105 °C; VDD = 3.6 V | max 19.2 uA | 90 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C conforming to JESD22-A114; class 2 | max 2000 V | 112 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C conforming to ANSI/ESD STM5.3.1; class II | max 500 V | 112 |
| Injected current on BOOT0 pin IINJ | Functional susceptibility: negative injection −0; positive injection NA | max 0 mA | 114 |
| Injected current on NRST pin IINJ | Functional susceptibility: negative injection −0; positive injection NA | max 0 mA | 114 |
| Injected current on PE2, PE3, PE4, PE5, PE6, PI8, PC13, PC14, PC15, PI9, PI10, PI11, PF0, PF1, PF2, PF3, PF4, PF5, PF10, PH0/OSC_IN, PH1/OSC_OUT, PC0, PC1, PC2, PC3, PB6, PB7, PB8, PB9, PE0, PE1, PI4, PI5, PI6, PI7, PDR_ON, BYPASS_REG IINJ | Functional susceptibility: negative injection −0; positive injection NA; only pins present in LQFP100 apply | max 0 mA | 114 |
| Injected current on all FT pins IINJ | Functional susceptibility: negative injection −5; positive injection NA | max -5 mA | 114 |
| Injected current on any other pin IINJ | Functional susceptibility: negative injection −5; positive injection +5 | min -5 · max 5 mA | 114 |
| BOOT0 I/O input hysteresis VHYS | 1.75 V ≤ VDD ≤ 3.6 V, -40 °C≤ TA ≤ 105 °C | min 0.1 V | 115 |
| BOOT0 I/O input hysteresis VHYS | 1.7 V ≤ VDD ≤ 3.6 V, 0 °C≤ TA ≤ 105 °C | min 0.1 V | 115 |
| I/O input leakage current Ilkg | VSS ≤ VIN ≤ VDD; maximum ±1 | max 1 uA | 115 |
| I/O FT input leakage current Ilkg | VIN = 5 V | max 3 uA | 115 |
| Weak pull-up equivalent resistor RPU | All pins except for PA10 and PB12 (OTG_FS_ID, OTG_HS_ID); VIN = VSS | min 30 · typ 40 · max 50 kΩ | 115 |
| Weak pull-up equivalent resistor RPU | PA10 and PB12 (OTG_FS_ID, OTG_HS_ID) | min 7 · typ 10 · max 14 kΩ | 115 |
| Weak pull-down equivalent resistor RPD | All pins except for PA10 and PB12; VIN = VDD | min 30 · typ 40 · max 50 kΩ | 115 |
| Weak pull-down equivalent resistor RPD | PA10 and PB12 | min 7 · typ 10 · max 14 kΩ | 115 |
| I/O pin capacitance CIO | typ 5 pF | 115 | |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD > 2.70 V | max 4 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD > 1.8 V | max 2 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 10 pF, VDD > 2.70 V | max 8 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 10 pF, VDD > 1.8 V | max 4 MHz | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD = 1.8 V to 3.6 V | max 100 ns | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD > 2.70 V | max 25 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD > 1.8 V | max 12.5 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 10 pF, VDD > 2.70 V | max 50 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 10 pF, VDD > 1.8 V | max 20 MHz | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD >2.7 V | max 10 ns | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD > 1.8 V | max 20 ns | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 10 pF, VDD > 2.70 V | max 6 ns | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 10 pF, VDD > 1.8 V | max 10 ns | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10; CL = 40 pF, VDD > 2.70 V | max 50 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10; CL = 40 pF, VDD > 1.8 V | max 25 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10; CL = 10 pF, VDD > 2.70 V | max 100 MHz | 117 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10; CL = 10 pF, VDD > 1.8 V | max 50 MHz | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10; CL = 40 pF, VDD > 2.70 V | max 6 ns | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10; CL = 40 pF, VDD > 1.8 V | max 10 ns | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10; CL = 10 pF, VDD > 2.70 V | max 4 ns | 117 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10; CL = 10 pF, VDD > 1.8 V | max 6 ns | 117 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 2.70 V; compensation cell should be used | max 100 MHz | 118 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 1.8 V | max 50 MHz | 118 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD > 2.70 V; compensation cell should be used | max 180 MHz | 118 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD > 1.8 V; compensation cell should be used | max 100 MHz | 118 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 2.70 V | max 4 ns | 118 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 1.8 V | max 6 ns | 118 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD > 2.70 V | max 2.5 ns | 118 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD > 1.8 V | max 4 ns | 118 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 10 ns | 118 | |
| Thermal resistance junction-ambient ΘJA | LQFP100 - 14 × 14 mm / 0.5 mm pitch; value | typ 43 °C/W | 184 |
| Input voltage on TTa pins VIN | min -0.3 V | 80 | |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | LQFP100; suffix 6, TA = 85 °C | max 465 mW | 80 |
| BOR hysteresis VBORhyst | Guaranteed by design | typ 100 mV | 84 |
| Reset temporization TRSTTEMPO | Guaranteed by design | min 0.5 · typ 1.5 · max 3 ms | 84 |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH | Guaranteed by design | typ 160 · max 200 mA | 84 |
| InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH | VDD = 1.8 V, TA = 105 °C, IRUSH = 171 mA for 31 us; guaranteed by design | max 5.4 uC | 84 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 168 MHz; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 V | typ 87 · max 102 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 144 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 67 · max 80 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 120 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 56 · max 69 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 90 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 44 · max 56 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 60 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 30 · max 42 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 30 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 16 · max 28 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 25 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 12 · max 24 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 16 MHz = system clock/2; typ: TA = 25 °C; max: TA = 85 °C | typ 9 · max 20 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 8 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 5 · max 17 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 4 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 3 · max 15 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 2 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 2 · max 14 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 168 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 40 · max 54 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 144 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 31 · max 43 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 120 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 26 · max 38 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 90 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 20 · max 32 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 60 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 14 · max 26 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 30 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 8 · max 20 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 25 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 6 · max 18 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 16 MHz = system clock/2; typ: TA = 25 °C; max: TA = 85 °C | typ 5 · max 16 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 8 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 3 · max 15 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 4 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 2 · max 14 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 2 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 2 · max 14 mA | 85 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 168 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 93 · max 109 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 144 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 76 · max 89 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 120 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 67 · max 79 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 90 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 53 · max 65 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 60 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 37 · max 49 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 30 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 20 · max 32 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 25 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 16 · max 27 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 16 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 11 · max 23 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 8 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 6 · max 18 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 4 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 4 · max 16 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals enabled; fHCLK = 2 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 3 · max 15 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 168 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 46 · max 61 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 144 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 40 · max 52 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 120 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 37 · max 48 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 90 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 30 · max 42 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 60 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 22 · max 33 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 30 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 12 · max 24 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 25 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 10 · max 21 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 16 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 7 · max 19 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 8 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 4 · max 16 mA | 86 |
| Supply current in Run mode IDD | External clock, all peripherals disabled; fHCLK = 4 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 3 · max 15 mA | 86 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 168 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 59 · max 77 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 144 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 46 · max 61 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 120 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 38 · max 53 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 90 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 30 · max 44 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 60 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 20 · max 34 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 30 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 11 · max 24 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 25 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 8 · max 21 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 16 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 6 · max 18 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 8 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 3 · max 16 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 4 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 2 · max 15 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals enabled; fHCLK = 2 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 2 · max 14 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 168 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 12 · max 27 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 144 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 9 · max 22 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 120 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 8 · max 20 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 90 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 7 · max 19 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 60 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 5 · max 17 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 30 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 3 · max 16 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 25 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 2 · max 15 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 16 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 2 · max 14 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 8 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 1 · max 14 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 4 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 1 · max 13 mA | 89 |
| Supply current in Sleep mode IDD | External clock, all peripherals disabled; fHCLK = 2 MHz; typ: TA = 25 °C; max: TA = 85 °C | typ 1 · max 13 mA | 89 |
| Supply current in Stop mode with main regulator in Run mode IDD_STOP | Flash in Stop mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °C | max 11 mA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 1.8 V | typ 3 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 2.4 V | typ 3.4 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, low-speed oscillator and RTC ON; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 V | typ 4 · max 20 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 1.8 V | typ 2.4 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 2.4 V | typ 2.7 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, low-speed oscillator and RTC ON; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 V | typ 3.3 · max 16 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC OFF; TA = 25 °C, VDD = 1.8 V | typ 2.4 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC OFF; TA = 25 °C, VDD = 2.4 V | typ 2.6 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC OFF; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 V | typ 3 · max 12.5 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC OFF; TA = 25 °C, VDD = 1.8 V | typ 1.7 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC OFF; TA = 25 °C, VDD = 2.4 V | typ 1.9 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC OFF; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 V | typ 2.2 · max 9.8 uA | 90 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 1.8 V | typ 1.29 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 2.4 V | typ 1.42 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, low-speed oscillator and RTC ON; typ: TA = 25 °C, VBAT = 3.3 V; max: TA = 85 °C, VBAT = 3.6 V | typ 1.68 · max 6 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 1.8 V | typ 0.62 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 2.4 V | typ 0.73 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, low-speed oscillator and RTC ON; typ: TA = 25 °C, VBAT = 3.3 V; max: TA = 85 °C, VBAT = 3.6 V | typ 0.96 · max 3 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC OFF; TA = 25 °C, VBAT = 1.8 V | typ 0.79 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC OFF; TA = 25 °C, VBAT = 2.4 V | typ 0.81 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC OFF; typ: TA = 25 °C, VBAT = 3.3 V; max: TA = 85 °C, VBAT = 3.6 V | typ 0.86 · max 5 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC OFF; TA = 25 °C, VBAT = 1.8 V | typ 0.1 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC OFF; TA = 25 °C, VBAT = 2.4 V | typ 0.1 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC OFF; typ: TA = 25 °C, VBAT = 3.3 V; max: TA = 85 °C, VBAT = 3.6 V | typ 0.1 · max 2 uA | 91 |
| Supply current in Run mode IDD | All peripheral disabled; fHCLK = 160 MHz; TA = 25 °C | typ 36.2 mA | 93 |
| Supply current in Run mode IDD | All peripheral disabled; fHCLK = 144 MHz; TA = 25 °C | typ 29.3 mA | 93 |
| Supply current in Run mode IDD | All peripheral disabled; fHCLK = 120 MHz; TA = 25 °C | typ 24.7 mA | 93 |
| Supply current in Run mode IDD | All peripheral disabled; fHCLK = 90 MHz; TA = 25 °C | typ 19.3 mA | 93 |
| Supply current in Run mode IDD | All peripheral disabled; fHCLK = 60 MHz; TA = 25 °C | typ 13.4 mA | 93 |
| Supply current in Run mode IDD | All peripheral disabled; fHCLK = 30 MHz; TA = 25 °C | typ 7.7 mA | 93 |
| Supply current in Run mode IDD | All peripheral disabled; fHCLK = 25 MHz; TA = 25 °C | typ 6 mA | 93 |
| GPIOA IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.7 uA/MHz | 96 |
| GPIOA IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.4 uA/MHz | 96 |
| GPIOB IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.5 uA/MHz | 96 |
| GPIOB IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 96 |
| GPIOC IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.54 uA/MHz | 96 |
| GPIOC IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.28 uA/MHz | 96 |
| GPIOD IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.55 uA/MHz | 96 |
| GPIOD IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.28 uA/MHz | 96 |
| GPIOE IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.68 uA/MHz | 96 |
| GPIOE IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.4 uA/MHz | 96 |
| GPIOF IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.53 uA/MHz | 96 |
| GPIOF IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.28 uA/MHz | 96 |
| GPIOG IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.51 uA/MHz | 96 |
| GPIOG IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 96 |
| GPIOH IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.51 uA/MHz | 96 |
| GPIOH IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 96 |
| GPIOI IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.5 uA/MHz | 96 |
| GPIOI IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 96 |
| OTG_HS+ULPI IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 28.33 uA/MHz | 96 |
| OTG_HS+ULPI IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 25.38 uA/MHz | 96 |
| CRC IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 0.41 uA/MHz | 96 |
| CRC IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 0.4 uA/MHz | 96 |
| BKPSRAM IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 0.63 uA/MHz | 96 |
| BKPSRAM IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 0.58 uA/MHz | 96 |
| DMA1 IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 37.44 uA/MHz | 96 |
| DMA1 IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 33.58 uA/MHz | 96 |
| DMA2 IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 37.69 uA/MHz | 96 |
| DMA2 IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 33.93 uA/MHz | 96 |
| ETH_MAC ETH_MAC_TX ETH_MAC_RX ETH_MAC_PTP IDD | AHB1; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 20.43 uA/MHz | 96 |
| ETH_MAC ETH_MAC_TX ETH_MAC_RX ETH_MAC_PTP IDD | AHB1; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 18.39 uA/MHz | 96 |
| OTG_FS IDD | AHB2; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 26.45 uA/MHz | 97 |
| OTG_FS IDD | AHB2; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 26.67 uA/MHz | 97 |
| DCMI IDD | AHB2; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 5.87 uA/MHz | 97 |
| DCMI IDD | AHB2; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 5.35 uA/MHz | 97 |
| RNG IDD | AHB2; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 1.5 uA/MHz | 97 |
| RNG IDD | AHB2; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 1.67 uA/MHz | 97 |
| FSMC IDD | AHB3; Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C | typ 12.46 uA/MHz | 97 |
| FSMC IDD | AHB3; Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C | typ 11.31 uA/MHz | 97 |
| Bus matrix IDD | Scale1, up to 168 MHz; VDD = 3.3 V, TA = 25 °C; automatically active when at least one master is ON | typ 13.1 uA/MHz | 97 |
| Bus matrix IDD | Scale2, up to 144 MHz; VDD = 3.3 V, TA = 25 °C; automatically active when at least one master is ON | typ 11.81 uA/MHz | 97 |
| TIM2 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 16.71 uA/MHz | 97 |
| TIM2 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 16.5 uA/MHz | 97 |
| TIM3 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 12.33 uA/MHz | 97 |
| TIM3 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 11.94 uA/MHz | 97 |
| TIM4 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 13.45 uA/MHz | 97 |
| TIM4 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 12.92 uA/MHz | 97 |
| TIM5 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 17.14 uA/MHz | 97 |
| TIM5 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 16.58 uA/MHz | 97 |
| TIM6 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.43 uA/MHz | 97 |
| TIM6 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 3.06 uA/MHz | 97 |
| TIM7 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.43 uA/MHz | 97 |
| TIM7 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 97 |
| TIM12 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 6.62 uA/MHz | 97 |
| TIM12 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 6.83 uA/MHz | 97 |
| TIM13 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 5.05 uA/MHz | 97 |
| TIM13 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 5.47 uA/MHz | 97 |
| TIM14 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 5.26 uA/MHz | 97 |
| TIM14 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 5.61 uA/MHz | 97 |
| PWR IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 1 uA/MHz | 97 |
| PWR IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 0.56 uA/MHz | 97 |
| USART2 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.69 uA/MHz | 97 |
| USART2 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.78 uA/MHz | 97 |
| USART3 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.74 uA/MHz | 97 |
| USART3 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.78 uA/MHz | 97 |
| UART4 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 3.24 uA/MHz | 97 |
| UART4 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 3.33 uA/MHz | 97 |
| UART5 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.69 uA/MHz | 97 |
| UART5 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.78 uA/MHz | 97 |
| I2C1 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.67 uA/MHz | 97 |
| I2C1 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.5 uA/MHz | 97 |
| I2C2 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.83 uA/MHz | 97 |
| I2C2 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.78 uA/MHz | 97 |
| I2C3 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.81 uA/MHz | 97 |
| I2C3 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.78 uA/MHz | 97 |
| SPI2 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.43 uA/MHz | 97 |
| SPI2 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 97 |
| SPI3 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.43 uA/MHz | 97 |
| SPI3 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 97 |
| I2S2 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.43 uA/MHz | 97 |
| I2S2 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 97 |
| I2S3 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 2.26 uA/MHz | 97 |
| I2S3 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 2.22 uA/MHz | 97 |
| CAN1 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 5.12 uA/MHz | 97 |
| CAN1 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 5.56 uA/MHz | 97 |
| CAN2 IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 4.81 uA/MHz | 97 |
| CAN2 IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 5.28 uA/MHz | 97 |
| DAC IDD | APB1, up to 42 MHz; Scale1; digital part; VDD = 3.3 V, TA = 25 °C | typ 1.67 uA/MHz | 97 |
| DAC IDD | APB1, up to 42 MHz; Scale2; digital part; VDD = 3.3 V, TA = 25 °C | typ 1.67 uA/MHz | 97 |
| WWDG IDD | APB1, up to 42 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 1 uA/MHz | 97 |
| WWDG IDD | APB1, up to 42 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 0.83 uA/MHz | 97 |
| SDIO IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 7.08 uA/MHz | 98 |
| SDIO IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 7.92 uA/MHz | 98 |
| TIM1 IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 16.79 uA/MHz | 98 |
| TIM1 IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 15.51 uA/MHz | 98 |
| TIM8 IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 17.88 uA/MHz | 98 |
| TIM8 IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 16.53 uA/MHz | 98 |
| TIM9 IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 7.64 uA/MHz | 98 |
| TIM9 IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 7.28 uA/MHz | 98 |
| TIM10 IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 4.89 uA/MHz | 98 |
| TIM10 IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 4.82 uA/MHz | 98 |
| TIM11 IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 5.19 uA/MHz | 98 |
| TIM11 IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 4.82 uA/MHz | 98 |
| ADC1 IDD | APB2, up to 84 MHz; Scale1; digital part; VDD = 3.3 V, TA = 25 °C | typ 4.67 uA/MHz | 98 |
| ADC1 IDD | APB2, up to 84 MHz; Scale2; digital part; VDD = 3.3 V, TA = 25 °C | typ 4.58 uA/MHz | 98 |
| ADC2 IDD | APB2, up to 84 MHz; Scale1; digital part; VDD = 3.3 V, TA = 25 °C | typ 4.67 uA/MHz | 98 |
| ADC2 IDD | APB2, up to 84 MHz; Scale2; digital part; VDD = 3.3 V, TA = 25 °C | typ 4.58 uA/MHz | 98 |
| ADC3 IDD | APB2, up to 84 MHz; Scale1; digital part; VDD = 3.3 V, TA = 25 °C | typ 4.43 uA/MHz | 98 |
| ADC3 IDD | APB2, up to 84 MHz; Scale2; digital part; VDD = 3.3 V, TA = 25 °C | typ 4.44 uA/MHz | 98 |
| SPI1 IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 1.32 uA/MHz | 98 |
| SPI1 IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 1.39 uA/MHz | 98 |
| USART1 IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 3.51 uA/MHz | 98 |
| USART1 IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 3.72 uA/MHz | 98 |
| USART6 IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 3.55 uA/MHz | 98 |
| USART6 IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 3.75 uA/MHz | 98 |
| SYSCFG IDD | APB2, up to 84 MHz; Scale1; VDD = 3.3 V, TA = 25 °C | typ 0.74 uA/MHz | 98 |
| SYSCFG IDD | APB2, up to 84 MHz; Scale2; VDD = 3.3 V, TA = 25 °C | typ 0.56 uA/MHz | 98 |
| Wakeup from Sleep mode tWUSLEEP | typ 5 CPU clock cycle | 99 | |
| Wakeup from Stop mode tWUSTOP | regulator in Run mode and Flash memory in Stop mode | typ 13 us | 99 |
| Wakeup from Stop mode tWUSTOP | regulator in low-power mode and Flash memory in Stop mode | typ 17 · max 40 us | 99 |
| Wakeup from Stop mode tWUSTOP | regulator in Run mode and Flash memory in Deep power-down mode | typ 105 us | 99 |
| Wakeup from Stop mode tWUSTOP | regulator in low-power mode and Flash memory in Deep power-down mode | typ 110 us | 99 |
| Wakeup from Standby mode tWUSTDBY | Minimum at 105 °C; maximum at –45 °C | min 260 · typ 375 · max 480 us | 99 |
| External user clock source frequency fHSE_ext | min 1 · max 50 MHz | 99 | |
| OSC_IN high or low time tw(HSE) | min 5 ns | 99 | |
| OSC_IN rise or fall time tr(HSE), tf(HSE) | max 10 ns | 99 | |
| OSC_IN input capacitance Cin(HSE) | typ 5 pF | 99 | |
| Duty cycle DuCy(HSE) | min 45 · max 55 % | 99 | |
| Oscillator frequency fOSC_IN | min 4 · max 26 MHz | 101 | |
| Feedback resistor RF | typ 200 kΩ | 101 | |
| Oscillator transconductance Gm | Startup | min 5 mA/V | 101 |
| Maximum critical crystal Gm Gmcritmax | Startup | max 1 mA/V | 101 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 101 |
| Oscillator frequency fOSC_IN | typ 32.768 MHz | 102 | |
| Feedback resistor RF | typ 18.4 MΩ | 102 | |
| LSE current consumption IDD | max 1 uA | 102 | |
| Oscillator transconductance Gm | Startup | min 2.8 uA/V | 102 |
| Maximum critical crystal Gm Gmcritmax | Startup | max 0.56 uA/V | 102 |
| startup time tSU(LSE) | VDD is stabilized | typ 2 s | 102 |
| Frequency fHSI | VDD = 3.3 V, PLL OFF, TA = –40 to 125 °C | typ 16 MHz | 103 |
| HSI user trimming step | VDD = 3.3 V, PLL OFF, TA = –40 to 125 °C | max 1 % | 103 |
| Accuracy of the HSI oscillator ACCHSI | TA = –40 to 105 °C; VDD = 3.3 V, PLL OFF | min -8 · max 4.5 % | 103 |
| Accuracy of the HSI oscillator ACCHSI | TA = –10 to 85 °C; VDD = 3.3 V, PLL OFF | min -4 · max 4 % | 103 |
| Accuracy of the HSI oscillator ACCHSI | TA = 25 °C; VDD = 3.3 V, PLL OFF; factory calibrated, parts not soldered | min -1 · max 1 % | 103 |
| HSI oscillator startup time tsu(HSI) | VDD = 3.3 V, PLL OFF, TA = –40 to 125 °C | typ 2.2 · max 4 us | 103 |
| HSI oscillator power consumption IDD(HSI) | VDD = 3.3 V, PLL OFF, TA = –40 to 125 °C | typ 60 · max 80 uA | 103 |
| Frequency fLSI | VDD = 3 V, TA = –40 to 105 °C | min 17 · typ 32 · max 47 kHz | 103 |
| LSI oscillator startup time tsu(LSI) | VDD = 3 V, TA = –40 to 105 °C | typ 15 · max 40 us | 103 |
| LSI oscillator power consumption IDD(LSI) | VDD = 3 V, TA = –40 to 105 °C | typ 0.4 · max 0.6 uA | 103 |
| Cycle-to-cycle jitter Jitter | System clock 120 MHz, RMS | typ 25 ps | 105 |
| Period Jitter Jitter | System clock 120 MHz, RMS | typ 15 ps | 105 |
| Main clock output (MCO) for RMII Ethernet Jitter | Cycle to cycle at 50 MHz on 1000 samples | typ 32 ps | 105 |
| Main clock output (MCO) for MII Ethernet Jitter | Cycle to cycle at 25 MHz on 1000 samples | typ 40 ps | 105 |
| Bit Time CAN jitter Jitter | Cycle to cycle at 1 MHz on 1000 samples | typ 330 ps | 105 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 100 MHz | min 0.15 · max 0.4 mA | 105 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 105 |
| PLL power consumption on VDDA IDDA(PLL) | VCO freq = 100 MHz | min 0.3 · max 0.4 mA | 105 |
| PLL power consumption on VDDA IDDA(PLL) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 105 |
| PLLI2S input clock fPLLI2S_IN | min 0.95 · typ 1 · max 2.1 MHz | 105 | |
| PLLI2S multiplier output clock fPLLI2S_OUT | max 216 MHz | 105 | |
| PLLI2S VCO output fVCO_OUT | min 100 · max 432 MHz | 105 | |
| PLLI2S lock time tLOCK | VCO freq = 100 MHz | min 75 · max 200 us | 105 |
| PLLI2S lock time tLOCK | VCO freq = 432 MHz | min 100 · max 300 us | 105 |
| Master I2S clock jitter Jitter | Cycle to cycle at 12.288 MHz on 48KHz period, N=432, R=5; RMS; main PLL running | typ 90 ps | 105 |
| Master I2S clock jitter Jitter | Average frequency of 12.288 MHz, N = 432, R = 5, on 1000 samples; main PLL running | typ 90 ps | 105 |
| WS I2S clock jitter Jitter | Cycle to cycle at 48 KHz on 1000 samples; main PLL running | typ 400 ps | 105 |
| PLLI2S power consumption on VDD IDD(PLLI2S) | VCO freq = 100 MHz | min 0.15 · max 0.4 mA | 106 |
| PLLI2S power consumption on VDD IDD(PLLI2S) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 106 |
| PLLI2S power consumption on VDDA IDDA(PLLI2S) | VCO freq = 100 MHz | min 0.3 · max 0.4 mA | 106 |
| PLLI2S power consumption on VDDA IDDA(PLLI2S) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 106 |
| Modulation frequency fMod | max 10 KHz | 106 | |
| Peak modulation depth md | min 0.25 · max 2 % | 106 | |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C conforming to JESD22-A114; class 2; VBAT exception: 1000 V | max 2000 V | 112 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | VBAT pin | max 1000 V | 113 |
| Output low level voltage VOL | CMOS port, IIO = +8 mA, 2.7 V < VDD < 3.6 V | max 0.4 V | 116 |
| Output low level voltage VOL | TTL port, IIO =+ 8mA, 2.7 V < VDD < 3.6 V | max 0.4 V | 116 |
| Output high level voltage VOH | TTL port, IIO =+ 8mA, 2.7 V < VDD < 3.6 V | min 2.4 V | 116 |
| Output low level voltage VOL | IIO = +20 mA, 2.7 V < VDD < 3.6 V | max 1.3 V | 116 |
| Output low level voltage VOL | IIO = +6 mA, 2 V < VDD < 2.7 V | max 0.4 V | 116 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD >2.7 V | max 10 ns | 117 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 2.70 V | max 100 MHz | 118 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD > 2.70 V | max 180 MHz | 118 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD > 1.8 V | max 100 MHz | 118 |
| Receive data setup time tsu(RXD) | min 9 ns | 133 | |
| Receive data hold time tih(RXD) | min 10 ns | 133 | |
| Data valid setup time tsu(DV) | min 9 ns | 133 | |
| Data valid hold time tih(DV) | min 8 ns | 133 | |
| Error setup time tsu(ER) | min 6 ns | 133 | |
| Error hold time tih(ER) | min 8 ns | 133 | |
| Transmit enable valid delay time td(TXEN) | min 0 · typ 10 · max 14 ns | 133 | |
| Transmit data valid delay time td(TXD) | min 0 · typ 10 · max 15 ns | 133 | |
| Power supply VDDA | min 1.8 · max 3.6 V | 133 | |
| Positive reference voltage VREF+ | min 1.8 V | 133 | |
| Negative reference voltage VREF− | typ 0 V | 133 | |
| ADC clock frequency fADC | VDDA = 1.8 to 2.4 V | min 0.6 · typ 15 · max 18 MHz | 133 |
| ADC clock frequency fADC | VDDA = 2.4 to 3.6 V | min 0.6 · typ 30 · max 36 MHz | 133 |
| External trigger frequency fTRIG | fADC = 30 MHz, 12-bit resolution | max 1764 kHz | 133 |
| External trigger frequency fTRIG | max 17 1/fADC | 133 | |
| External input impedance RAIN | See Equation 1 for details | max 50 κΩ | 133 |
| Sampling switch resistance RADC | max 6 κΩ | 133 | |
| Internal sample and hold capacitor CADC | typ 4 pF | 133 | |
| Resistor bridge for VBAT R | typ 50 KΩ | 139 | |
| Ratio on VBAT measurement Q | typ 2 | 139 | |
| Error on Q Er | min -1 · max 1 % | 139 | |
| ADC sampling time when reading the VBAT TS_vbat | 1 mV accuracy | min 5 us | 139 |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.18 · typ 1.21 · max 1.24 V | 139 |
| ADC sampling time when reading the internal reference voltage TS_vrefint | min 10 us | 139 | |
| Internal reference voltage spread over the temperature range VRERINT_s | VDD = 3 V | typ 3 · max 5 mV | 139 |
| Temperature coefficient TCoeff | typ 30 · max 50 ppm/°C | 139 | |
| Startup time tSTART | typ 6 · max 10 us | 139 | |
| Analog supply voltage VDDA | min 1.8 · max 3.6 V | 139 | |
| Reference supply voltage VREF+ | VREF+ ≤ VDDA | min 1.8 · max 3.6 V | 139 |
| Ground VSSA | min 0 · max 0 V | 139 | |
| Thermal resistance junction-ambient ΘJA | LQFP100 - 14 × 14 mm / 0.5 mm pitch | typ 43 °C/W | 184 |

rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU

MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.



pekkaroi/ethernetcnc
This is my project for controlling CNC machine via ethernet port using LinuxCNC. It was originally shortly instroduced at http://pekka.eu/cnc.


Ashassins/NYAKB
ECE 477 Project: NYAKB is a multimedia keyboard with hot swappable modules

Yes. The symbol is MCU_ST_STM32F4:STM32F407VGTx and the footprint Package_QFP:LQFP-100_14x14mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-100(14x14), with 100 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C12345, with 10,161 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the GD32F407VET6 by GigaDevice Semicon Beijing, the GD32F407VGT6 by GigaDevice Semicon Beijing, the GD32F470VIT6 by GigaDevice Semicon Beijing and the STM32F407VET6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
32 boards in 26 repositories on GitHub; the most starred are listed on this page, with their KiCad files.