Skip to the content

STM32F407VET6

STMicroelectronicsExtended

-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 32 Bit 512KB 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32F407VET6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-100(14x14)
Pins
100
In stock
5,210 at JLCPCB (C28730)
Used on
9 open-source boards

Overview

The STM32F407VET6 is a microcontroller made by STMicroelectronics in a LQFP-100(14x14) package with 100 pins. -40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 32 Bit 512KB 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32F4:STM32F407VETx, from KiCad's library) and its footprint (Package_QFP:LQFP-100_14x14mm_P0.5mm, from KiCad's library), ready for a KiCad board. 5,210 are in stock at JLCPCB (part C28730). 9 open-source boards in 9 repositories on GitHub use it.

Symbol

1PE22PE33PE44PE55PE66VBAT7PC138PC149PC1510VSS11VDD12PH013PH114NRST15PC016PC117PC218PC319VDD20VSSA21VREF+22VDDA23PA024PA125PA226PA328VDD29PA430PA531PA632PA733PC434PC535PB036PB137PB238PE739PE840PE941PE1042PE1143PE1244PE1345PE1446PE1547PB1048PB1149VCAP_150VDD51PB1252PB1353PB1454PB1555PD856PD957PD1058PD1159PD1260PD1361PD1462PD1563PC664PC765PC866PC967PA868PA969PA1070PA1171PA1272PA1373VCAP_275VDD76PA1477PA1578PC1079PC1180PC1281PD082PD183PD284PD385PD486PD587PD688PD789PB390PB491PB592PB693PB794BOOT095PB896PB997PE098PE1100VDD
MCU_ST_STM32F4:STM32F407VETxFrom KiCad's library

Footprint

Package_QFP:LQFP-100_14x14mm_P0.5mmFrom KiCad's library

From the datasheet

18
Supply, least
1.8 V · VDD, recommended operating min · p. 77
Supply, most
3.6 V · VDD, recommended operating max · p. 77
Supply, most
2.4 V · VDDA, recommended operating max, ADC limited to 1.2 M samples · p. 77
Supply, least
2.4 V · VDDA, recommended operating min, ADC limited to 1.4 M samples · p. 77
Supply, least
1.65 V · VBAT, recommended operating min · p. 77
Supply, absolute maximum
4 V · VDD including VDDA, absolute max · p. 76
Works from
-40 °C · ambient min, suffix 6, maximum power dissipation · p. 78
Works up to
85 °C · ambient max, suffix 6, maximum power dissipation · p. 78
Works up to
105 °C · ambient max, suffix 6, low power dissipation subject to TJmax · p. 78
Junction, hottest
105 °C · junction max, suffix 6 operating range · p. 78
Junction, hottest
125 °C · junction absolute max · p. 77
A pin gives at most
25 mA · absolute max current sunk by any I/O and control pin · p. 77
Takes working
87 mA · typical Run, 168 MHz, ART enabled or RAM, all peripherals enabled, TA = 25 °C · p. 83
Takes at most
117 mA · max Run, 168 MHz, ART disabled, all peripherals enabled, TA = 105 °C · p. 84
Takes asleep
1.7 µA · typical Standby, VDD = 1.8 V, TA = 25 °C, backup SRAM and RTC OFF · p. 88
Junction to air (LQFP100)
43 K/W · junction-to-ambient thermal resistance · p. 169
Takes at most
109 mA · IDD, max Run at 168 MHz, ART disabled, all peripherals enabled, TA = 85 °C · p. 84
Takes asleep
2.2 µA · IDD_STBY, typical Standby, backup SRAM OFF, RTC OFF, VDD = 3.3 V, TA = 25 °C · p. 88

What it is and has

16
Core
ARM 32-bit Cortex-M4 CPU with FPU · p. 1
Maximum core frequency
168 MHz · p. 1
DAC
2 × 12-bit · p. 1
CAN
2 interfaces, 2.0B Active · p. 1
SDIO
SDIO interface · p. 1
LCD parallel interface
8080/6800 modes · p. 1
Random number generator
True random number generator · p. 1
CRC
CRC calculation unit · p. 1
Unique ID
96-bit · p. 1
RTC
Subsecond accuracy, hardware calendar · p. 1
Low-power modes
Sleep, Stop and Standby · p. 1
Package
LQFP100 (14 × 14 mm) · p. 1
Core
ARM Cortex-M4, 32-bit, FPU, 210 DMIPS · p. 1
Core
ARM Cortex-M4 32b MCU+FPU, 210DMIPS · p. 1
Debug interfaces
Serial wire debug (SWD) & JTAG · p. 1
Trace
Cortex-M4 Embedded Trace Macrocell · p. 1

Around it

1
cap 5 pF to 25 pF
between OSC_IN and GND; CL1; high-quality external ceramic capacitor for high-frequency applications, selected to match crystal requirements; include PCB and MCU pin capacitance when sizing · p. 98

Specifications

496
ParameterConditionsAs printedPage
External main supply voltage (including VDDA, VDD) VDD–VSSAbsolute maximum ratingsmin -0.3 · max 4 V76
Input voltage on any other pin VINAbsolute maximum ratingsmax 4 V76
Variations between different VDD power pins |ΔVDDx|Absolute maximum ratingsmax 50 mV76
Variations between all the different ground pins |VSSX − VSS|Absolute maximum ratingsmax 50 mV76
Total current into VDD power lines (source) IVDDAbsolute maximum ratingsmax 150 mA77
Total current out of VSS ground lines (sink) IVSSAbsolute maximum ratingsmax 150 mA77
Output current sunk by any I/O and control pin IIOAbsolute maximum ratingsmax 25 mA77
Output current source by any I/Os and control pin IIOAbsolute maximum ratingsmax 25 mA77
Injected current on five-volt tolerant I/O IINJ(PIN)Absolute maximum ratingsmin -5 · max 0 mA77
Injected current on any other pin IINJ(PIN)Absolute maximum ratings; ±5 mAmax 5 mA77
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN)Absolute maximum ratings; absolute sum of positive and negative injected currentsmax 25 mA77
Storage temperature range TSTGAbsolute maximum ratingsmin -65 · max 150 °C77
Maximum junction temperature TJAbsolute maximum ratingsmax 125 °C77
Internal AHB clock frequency fHCLKVOS bit in PWR_CR register = 0min 0 · max 144 MHz77
Internal AHB clock frequency fHCLKVOS bit in PWR_CR register = 1min 0 · max 168 MHz77
Internal APB1 clock frequency fPCLK1min 0 · max 42 MHz77
Internal APB2 clock frequency fPCLK2min 0 · max 84 MHz77
Standard operating voltage VDDMinimum subject to footnote 2min 1.8 · max 3.6 V77
Analog operating voltage (ADC limited to 1.2 M samples) VDDAMust be the same potential as VDD; minimum subject to footnote 2min 1.8 · max 2.4 V77
Analog operating voltage (ADC limited to 1.4 M samples) VDDAMust be the same potential as VDDmin 2.4 · max 3.6 V77
Backup operating voltage VBATmin 1.65 · max 3.6 V77
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12VOS bit in PWR_CR register = 0; max frequency 144MHzmin 1.08 · typ 1.14 · max 1.2 V78
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12VOS bit in PWR_CR register = 1; max frequency 168MHzmin 1.2 · typ 1.26 · max 1.32 V78
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Max frequency 144MHzmin 1.1 · typ 1.14 · max 1.2 V78
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Max frequency 168MHzmin 1.2 · typ 1.26 · max 1.3 V78
Input voltage on RST and FT pins VIN2 V ≤ VDD ≤ 3.6 Vmin -0.3 · max 5.5 V78
Input voltage on RST and FT pins VINVDD ≤ 2 Vmin -0.3 · max 5.2 V78
Input voltage on TTa pins VINMaximum VDDA + 0.3 V is split across linesmin -0.3 V78
Input voltage on B pin VINmax 5.5 V78
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP100; suffix 6, TA = 85 °Cmax 465 mW78
Ambient temperature for 6 suffix version TAMaximum power dissipationmin -40 · max 85 °C78
Ambient temperature for 6 suffix version TALow power dissipation; TJ must not exceed TJmaxmin -40 · max 105 °C78
Junction temperature range TJ6 suffix versionmin -40 · max 105 °C78
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 168 MHz; TA = 25 °Ctyp 87 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 168 MHz; TA = 85 °Cmax 102 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 168 MHz; TA = 105 °Cmax 109 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 144 MHz; TA = 25 °Ctyp 67 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 144 MHz; TA = 85 °Cmax 80 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 144 MHz; TA = 105 °Cmax 86 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 120 MHz; TA = 25 °Ctyp 56 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 120 MHz; TA = 85 °Cmax 69 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 120 MHz; TA = 105 °Cmax 75 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 90 MHz; TA = 25 °Ctyp 44 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 90 MHz; TA = 85 °Cmax 56 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 90 MHz; TA = 105 °Cmax 62 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 60 MHz; TA = 25 °Ctyp 30 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 60 MHz; TA = 85 °Cmax 42 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 60 MHz; TA = 105 °Cmax 49 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 30 MHz; TA = 25 °Ctyp 16 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 30 MHz; TA = 85 °Cmax 28 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 30 MHz; TA = 105 °Cmax 35 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 25 MHz; TA = 25 °Ctyp 12 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 25 MHz; TA = 85 °Cmax 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 25 MHz; TA = 105 °Cmax 31 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; HCLK = system clock/2; TA = 25 °Ctyp 9 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; HCLK = system clock/2; TA = 85 °Cmax 20 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; HCLK = system clock/2; TA = 105 °Cmax 28 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 25 °Ctyp 5 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 85 °Cmax 17 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 105 °Cmax 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 4 MHz; TA = 25 °Ctyp 3 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 4 MHz; TA = 85 °Cmax 15 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 4 MHz; TA = 105 °Cmax 22 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 2 MHz; TA = 25 °Ctyp 2 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 2 MHz; TA = 85 °Cmax 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 2 MHz; TA = 105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 168 MHz; TA = 25 °Ctyp 40 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 168 MHz; TA = 85 °Cmax 54 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 168 MHz; TA = 105 °Cmax 61 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 144 MHz; TA = 25 °Ctyp 31 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 144 MHz; TA = 85 °Cmax 43 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 144 MHz; TA = 105 °Cmax 50 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 120 MHz; TA = 25 °Ctyp 26 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 120 MHz; TA = 85 °Cmax 38 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 120 MHz; TA = 105 °Cmax 45 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 90 MHz; TA = 25 °Ctyp 20 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 90 MHz; TA = 85 °Cmax 32 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 90 MHz; TA = 105 °Cmax 39 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 60 MHz; TA = 25 °Ctyp 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 60 MHz; TA = 85 °Cmax 26 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 60 MHz; TA = 105 °Cmax 33 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 30 MHz; TA = 25 °Ctyp 8 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 30 MHz; TA = 85 °Cmax 20 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 30 MHz; TA = 105 °Cmax 27 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 25 MHz; TA = 25 °Ctyp 6 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 25 MHz; TA = 85 °Cmax 18 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 25 MHz; TA = 105 °Cmax 25 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; HCLK = system clock/2; TA = 25 °Ctyp 5 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; HCLK = system clock/2; TA = 85 °Cmax 16 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; HCLK = system clock/2; TA = 105 °Cmax 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 25 °Ctyp 3 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 85 °Cmax 15 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 105 °Cmax 22 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 4 MHz; TA = 25 °Ctyp 2 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 4 MHz; TA = 85 °Cmax 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 4 MHz; TA = 105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 2 MHz; TA = 25 °Ctyp 2 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 2 MHz; TA = 85 °Cmax 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 2 MHz; TA = 105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 168 MHz; TA = 25 °Ctyp 93 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 168 MHz; TA = 85 °Cmax 109 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 168 MHz; TA = 105 °Cmax 117 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 144 MHz; TA = 25 °Ctyp 76 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 144 MHz; TA = 85 °Cmax 89 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 144 MHz; TA = 105 °Cmax 96 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 120 MHz; TA = 25 °Ctyp 67 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 120 MHz; TA = 85 °Cmax 79 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 120 MHz; TA = 105 °Cmax 86 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 90 MHz; TA = 25 °Ctyp 53 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 90 MHz; TA = 85 °Cmax 65 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 90 MHz; TA = 105 °Cmax 73 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 60 MHz; TA = 25 °Ctyp 37 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 60 MHz; TA = 85 °Cmax 49 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 60 MHz; TA = 105 °Cmax 56 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 30 MHz; TA = 25 °Ctyp 20 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 30 MHz; TA = 85 °Cmax 32 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 30 MHz; TA = 105 °Cmax 39 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 25 MHz; TA = 25 °Ctyp 16 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 25 MHz; TA = 85 °Cmax 27 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 25 MHz; TA = 105 °Cmax 35 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; TA = 25 °Ctyp 11 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; TA = 85 °Cmax 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; TA = 105 °Cmax 30 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 25 °Ctyp 6 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 85 °Cmax 18 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 105 °Cmax 25 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 4 MHz; TA = 25 °Ctyp 4 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 4 MHz; TA = 85 °Cmax 16 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 4 MHz; TA = 105 °Cmax 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 2 MHz; TA = 25 °Ctyp 3 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 2 MHz; TA = 85 °Cmax 15 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 2 MHz; TA = 105 °Cmax 22 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 168 MHz; TA = 25 °Ctyp 46 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 168 MHz; TA = 85 °Cmax 61 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 168 MHz; TA = 105 °Cmax 69 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 144 MHz; TA = 25 °Ctyp 40 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 144 MHz; TA = 85 °Cmax 52 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 144 MHz; TA = 105 °Cmax 60 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 120 MHz; TA = 25 °Ctyp 37 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 120 MHz; TA = 85 °Cmax 48 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 120 MHz; TA = 105 °Cmax 56 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 90 MHz; TA = 25 °Ctyp 30 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 90 MHz; TA = 85 °Cmax 42 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 90 MHz; TA = 105 °Cmax 50 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 60 MHz; TA = 25 °Ctyp 22 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 60 MHz; TA = 85 °Cmax 33 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 60 MHz; TA = 105 °Cmax 41 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 30 MHz; TA = 25 °Ctyp 12 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 30 MHz; TA = 85 °Cmax 24 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 30 MHz; TA = 105 °Cmax 31 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 25 MHz; TA = 25 °Ctyp 10 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 25 MHz; TA = 85 °Cmax 21 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 25 MHz; TA = 105 °Cmax 29 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; TA = 25 °Ctyp 7 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; TA = 85 °Cmax 19 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; TA = 105 °Cmax 26 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 25 °Ctyp 4 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 85 °Cmax 16 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 105 °Cmax 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 4 MHz; TA = 25 °Ctyp 3 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 4 MHz; TA = 85 °Cmax 15 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 4 MHz; TA = 105 °Cmax 22 mA84
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 25 °Ctyp 0.4 · max 1.5 mA88
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °Cmax 11 mA88
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 105 °Cmax 20 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Stop mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 25 °Ctyp 0.31 · max 1.1 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Stop mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °Cmax 8 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Stop mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 105 °Cmax 15 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 25 °Ctyp 0.28 · max 1.1 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °Cmax 8 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 105 °Cmax 15 mA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 1.8 Vtyp 3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 2.4 Vtyp 3.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 3.3 Vtyp 4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 85 °C; VDD = 3.6 Vmax 20 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 105 °C; VDD = 3.6 Vmax 36 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 1.8 Vtyp 2.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 2.4 Vtyp 2.7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C; VDD = 3.3 Vtyp 3.3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 85 °C; VDD = 3.6 Vmax 16 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 105 °C; VDD = 3.6 Vmax 32 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C; VDD = 1.8 Vtyp 2.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C; VDD = 2.4 Vtyp 2.6 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C; VDD = 3.3 Vtyp 3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 85 °C; VDD = 3.6 Vmax 12.5 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 105 °C; VDD = 3.6 Vmax 24.8 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C; VDD = 1.8 Vtyp 1.7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C; VDD = 2.4 Vtyp 1.9 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C; VDD = 3.3 Vtyp 2.2 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 85 °C; VDD = 3.6 Vmax 9.8 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 105 °C; VDD = 3.6 Vmax 19.2 uA88
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C conforming to JESD22-A114; class 2; VBAT exception in footnote 2max 2000 V108
Electrostatic discharge voltage (human body model) VESD(HBM)VBAT pinmax 1000 V108
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C conforming to JESD22-C101; class IImax 500 V108
Thermal resistance junction-ambient ΘJALQFP100 - 14 × 14 mm / 0.5 mm pitchtyp 43 °C/W169
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12VOS bit in PWR_CR register = 0; maximum frequency 144 MHzmin 1.08 · typ 1.14 · max 1.2 V78
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12VOS bit in PWR_CR register = 1; maximum frequency 168 MHzmin 1.2 · typ 1.26 · max 1.32 V78
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Maximum frequency 144 MHzmin 1.1 · typ 1.14 · max 1.2 V78
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Maximum frequency 168 MHzmin 1.2 · typ 1.26 · max 1.3 V78
Input voltage on RST and FT pins VIN2 V ≤ VDD ≤ 3.6 V; internal pull-up and pull-down disabled to sustain voltage higher than VDD+0.3min -0.3 · max 5.5 V78
Input voltage on RST and FT pins VINVDD ≤ 2 V; internal pull-up and pull-down disabled to sustain voltage higher than VDD+0.3min -0.3 · max 5.2 V78
Input voltage on TTa pins VINMaximum is VDDA + 0.3 V, printed across linesmin -0.3 V78
BOR hysteresis VBORhystGuaranteed by design, not tested in productiontyp 100 mV82
Reset temporization TRSTTEMPOPower-on POR or wakeup from VBAT to first instruction read; guaranteed by designmin 0.5 · typ 1.5 · max 3 ms82
InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSHGuaranteed by design, not tested in productiontyp 160 · max 200 mA82
InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSHVDD = 1.8 V, TA = 105 °C, IRUSH = 171 mA for 31 us; guaranteed by designmax 5.4 uC82
Supply current in Run mode IDD168 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 87 · max 102 mA83
Supply current in Run mode IDD144 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 67 · max 80 mA83
Supply current in Run mode IDD120 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 56 · max 69 mA83
Supply current in Run mode IDD90 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 44 · max 56 mA83
Supply current in Run mode IDD60 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 30 · max 42 mA83
Supply current in Run mode IDD30 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 16 · max 28 mA83
Supply current in Run mode IDD25 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 12 · max 24 mA83
Supply current in Run mode IDD16 MHz; HCLK = system clock/2; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 9 · max 20 mA83
Supply current in Run mode IDD8 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 5 · max 17 mA83
Supply current in Run mode IDD4 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 3 · max 15 mA83
Supply current in Run mode IDD2 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 2 · max 14 mA83
Supply current in Run mode IDD168 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 40 · max 54 mA83
Supply current in Run mode IDD144 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 31 · max 43 mA83
Supply current in Run mode IDD120 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 26 · max 38 mA83
Supply current in Run mode IDD90 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 20 · max 32 mA83
Supply current in Run mode IDD60 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 14 · max 26 mA83
Supply current in Run mode IDD30 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 8 · max 20 mA83
Supply current in Run mode IDD25 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 6 · max 18 mA83
Supply current in Run mode IDD16 MHz; HCLK = system clock/2; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 5 · max 16 mA83
Supply current in Run mode IDD8 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 3 · max 15 mA83
Supply current in Run mode IDD4 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 2 · max 14 mA83
Supply current in Run mode IDD2 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 2 · max 14 mA83
Supply current in Run mode IDD168 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 93 · max 109 mA84
Supply current in Run mode IDD144 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 76 · max 89 mA84
Supply current in Run mode IDD120 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 67 · max 79 mA84
Supply current in Run mode IDD90 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 53 · max 65 mA84
Supply current in Run mode IDD60 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 37 · max 49 mA84
Supply current in Run mode IDD30 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 20 · max 32 mA84
Supply current in Run mode IDD25 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 16 · max 27 mA84
Supply current in Run mode IDD16 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 11 · max 23 mA84
Supply current in Run mode IDD8 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 6 · max 18 mA84
Supply current in Run mode IDD4 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 4 · max 16 mA84
Supply current in Run mode IDD2 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 3 · max 15 mA84
Supply current in Run mode IDD168 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 46 · max 61 mA84
Supply current in Run mode IDD144 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 40 · max 52 mA84
Supply current in Run mode IDD120 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 37 · max 48 mA84
Supply current in Run mode IDD90 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 30 · max 42 mA84
Supply current in Run mode IDD60 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 22 · max 33 mA84
Supply current in Run mode IDD30 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 12 · max 24 mA84
Supply current in Run mode IDD25 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 10 · max 21 mA84
Supply current in Run mode IDD16 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 7 · max 19 mA84
Supply current in Run mode IDD8 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 4 · max 16 mA84
Supply current in Run mode IDD4 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 3 · max 15 mA84
Supply current in Sleep mode IDD168 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 59 · max 77 mA87
Supply current in Sleep mode IDD144 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 46 · max 61 mA87
Supply current in Sleep mode IDD120 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 38 · max 53 mA87
Supply current in Sleep mode IDD90 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 30 · max 44 mA87
Supply current in Sleep mode IDD60 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 20 · max 34 mA87
Supply current in Sleep mode IDD30 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 11 · max 24 mA87
Supply current in Sleep mode IDD25 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 8 · max 21 mA87
Supply current in Sleep mode IDD16 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 6 · max 18 mA87
Supply current in Sleep mode IDD8 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 3 · max 16 mA87
Supply current in Sleep mode IDD4 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 2 · max 15 mA87
Supply current in Sleep mode IDD2 MHz; external clock, all peripherals enabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 2 · max 14 mA87
Supply current in Sleep mode IDD168 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 12 · max 27 mA87
Supply current in Sleep mode IDD144 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 9 · max 22 mA87
Supply current in Sleep mode IDD120 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 8 · max 20 mA87
Supply current in Sleep mode IDD90 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 7 · max 19 mA87
Supply current in Sleep mode IDD60 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 5 · max 17 mA87
Supply current in Sleep mode IDD30 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 3 · max 16 mA87
Supply current in Sleep mode IDD25 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 2 · max 15 mA87
Supply current in Sleep mode IDD16 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 2 · max 14 mA87
Supply current in Sleep mode IDD8 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 1 · max 14 mA87
Supply current in Sleep mode IDD4 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 1 · max 13 mA87
Supply current in Sleep mode IDD2 MHz; external clock, all peripherals disabled; typ: TA = 25 °C, VDD = 3.3 V; max: TA = 85 °C, VDD = 3.6 Vtyp 1 · max 13 mA87
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 1.8 Vtyp 3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 2.4 Vtyp 3.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 3.3 Vtyp 4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 85 °C, VDD = 3.6 Vmax 20 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 1.8 Vtyp 2.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 2.4 Vtyp 2.7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 3.3 Vtyp 3.3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 85 °C, VDD = 3.6 Vmax 16 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C, VDD = 1.8 Vtyp 2.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C, VDD = 2.4 Vtyp 2.6 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C, VDD = 3.3 Vtyp 3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 85 °C, VDD = 3.6 Vmax 12.5 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C, VDD = 1.8 Vtyp 1.7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C, VDD = 2.4 Vtyp 1.9 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C, VDD = 3.3 Vtyp 2.2 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 85 °C, VDD = 3.6 Vmax 9.8 uA88
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 1.8 Vtyp 1.29 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 2.4 Vtyp 1.42 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 3.3 Vtyp 1.68 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 85 °C, VBAT = 3.6 Vmax 6 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 1.8 Vtyp 0.62 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 2.4 Vtyp 0.73 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 3.3 Vtyp 0.96 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 85 °C, VBAT = 3.6 Vmax 3 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 25 °C, VBAT = 1.8 Vtyp 0.79 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 25 °C, VBAT = 2.4 Vtyp 0.81 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 25 °C, VBAT = 3.3 Vtyp 0.86 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 85 °C, VBAT = 3.6 Vmax 5 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 25 °C, VBAT = 1.8 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 25 °C, VBAT = 2.4 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 25 °C, VBAT = 3.3 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 85 °C, VBAT = 3.6 Vmax 2 uA89
GPIO AAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.49 mA93
GPIO AAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.36 mA93
GPIO BAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.45 mA93
GPIO BAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.33 mA93
GPIO CAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.45 mA93
GPIO CAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.34 mA93
GPIO DAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.45 mA93
GPIO DAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.34 mA93
GPIO EAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.47 mA93
GPIO EAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.35 mA93
GPIO FAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.45 mA93
GPIO FAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.33 mA93
GPIO GAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.44 mA93
GPIO GAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.33 mA93
GPIO HAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.45 mA93
GPIO HAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.34 mA93
GPIO IAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.44 mA93
GPIO IAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.33 mA93
OTG_HS + ULPIAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 4.57 mA93
OTG_HS + ULPIAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 3.55 mA93
CRCAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.07 mA93
CRCAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.06 mA93
BKPSRAMAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.11 mA93
BKPSRAMAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.08 mA93
DMA1AHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 6.15 mA93
DMA1AHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 4.75 mA93
DMA2AHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 6.24 mA93
DMA2AHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 4.8 mA93
ETH_MAC + ETH_MAC_TX ETH_MAC_RX ETH_MAC_PTPAHB1; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 3.28 mA93
ETH_MAC + ETH_MAC_TX ETH_MAC_RX ETH_MAC_PTPAHB1; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 2.54 mA93
OTG_FSAHB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 4.59 mA93
OTG_FSAHB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 3.69 mA93
DCMIAHB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 1.04 mA93
DCMIAHB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.8 mA93
SDIOAPB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.64 mA95
SDIOAPB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.54 mA95
TIM1APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 1.47 mA95
TIM1APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 1.14 mA95
TIM8APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 1.58 mA95
TIM8APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 1.22 mA95
TIM9APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.68 mA95
TIM9APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.54 mA95
TIM10APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.45 mA95
TIM10APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.36 mA95
TIM11APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.47 mA95
TIM11APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.38 mA95
ADC1APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; ADON bit set in ADC_CR2 registertyp 2.2 mA95
ADC1APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; ADON bit set in ADC_CR2 registertyp 2.1 mA95
ADC2APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; ADON bit set in ADC_CR2 registertyp 2.04 mA95
ADC2APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; ADON bit set in ADC_CR2 registertyp 1.93 mA95
ADC3APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; ADON bit set in ADC_CR2 registertyp 2.1 mA95
ADC3APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; ADON bit set in ADC_CR2 registertyp 2 mA95
SPI1APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.14 mA95
SPI1APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.12 mA95
USART1APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.34 mA95
USART1APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.27 mA95
USART6APB2; 168 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.34 mA95
USART6APB2; 144 MHz; VDD = 3.3 V, TA = 25 °C; peripheral clock enabledtyp 0.28 mA95
Wakeup from Sleep mode tWUSLEEP16 MHz HSI RC oscillator; based on characterization, not tested in productiontyp 1 us95
Wakeup from Stop mode (regulator in Run mode) tWUSTOP16 MHz HSI RC oscillator; based on characterization, not tested in productiontyp 13 us95
Wakeup from Stop mode (regulator in low power mode) tWUSTOP16 MHz HSI RC oscillator; based on characterization, not tested in productiontyp 17 · max 40 us95
Wakeup from Stop mode (regulator in low power mode and Flash memory in Deep power down mode) tWUSTOP16 MHz HSI RC oscillator; based on characterization, not tested in productiontyp 110 us95
Wakeup from Standby mode tWUSTDBY16 MHz HSI RC oscillator; minimum at 105 °C, maximum at –45 °C; based on characterization, not tested in productionmin 260 · typ 375 · max 480 us95
Oscillator frequency fOSC_INBased on characterization, not tested in productionmin 4 · max 26 MHz98
Feedback resistor RFBased on characterization, not tested in productiontyp 200 kΩ98
HSE current consumption IDDVDD = 3.3 V, ESR = 30 Ω, CL = 5 pF at 25 MHztyp 449 uA98
HSE current consumption IDDVDD = 3.3 V, ESR = 30 Ω, CL = 10 pF at 25 MHztyp 532 uA98
Oscillator transconductance gmStartup; based on characterization, not tested in productionmin 5 mA/V98
Startup time tSU(HSE)VDD is stabilized; standard crystal resonator, stabilized 8 MHz oscillationtyp 2 ms98
Feedback resistor RFtyp 18.4 MΩ99
LSE current consumption IDDmax 1 uA99
Oscillator Transconductance gmmin 2.8 uA/V99
startup time tSU(LSE)VDD is stabilizedtyp 2 s99
Frequency fHSItyp 16 MHz99
Accuracy of the HSI oscillator ACCHSIUser-trimmed with the RCC_CR registermax 1 %99
Accuracy of the HSI oscillator ACCHSIFactory-calibrated; TA = –40 to 105 °Cmin -8 · max 4.5 %99
Accuracy of the HSI oscillator ACCHSIFactory-calibrated; TA = –10 to 85 °Cmin -4 · max 4 %99
Accuracy of the HSI oscillator ACCHSIFactory-calibrated; TA = 25 °Cmin -1 · max 1 %99
HSI oscillator startup time tsu(HSI)typ 2.2 · max 4 us99
HSI oscillator power consumption IDD(HSI)typ 60 · max 80 uA99
PLL input clock fPLL_INmin 0.95 · typ 1 · max 2.1 MHz101
PLL multiplier output clock fPLL_OUTmin 24 · max 168 MHz101
48 MHz PLL multiplier output clock fPLL48_OUTtyp 48 · max 75 MHz101
PLL VCO output fVCO_OUTmin 192 · max 432 MHz101
PLL lock time tLOCKVCO freq = 192 MHzmin 75 · max 200 us101
PLL lock time tLOCKVCO freq = 432 MHzmin 100 · max 300 us101
Cycle-to-cycle jitter JitterSystem clock 120 MHz; RMStyp 25 ps101
Cycle-to-cycle jitter JitterSystem clock 120 MHz; peak to peak; typical value printed as ±150typ 150 ps101
Period Jitter JitterSystem clock 120 MHz; RMStyp 15 ps101
Period Jitter JitterSystem clock 120 MHz; peak to peak; typical value printed as ±200typ 200 ps101
Main clock output (MCO) for RMII Ethernet JitterCycle to cycle at 50 MHz on 1000 samplestyp 32 ps101
Main clock output (MCO) for MII Ethernet JitterCycle to cycle at 25 MHz on 1000 samplestyp 40 ps101
Bit Time CAN jitter JitterCycle to cycle at 1 MHz on 1000 samplestyp 330 ps101
PLL power consumption on VDD IDD(PLL)VCO freq = 192 MHzmin 0.15 · max 0.4 mA101
PLL power consumption on VDD IDD(PLL)VCO freq = 432 MHzmin 0.45 · max 0.75 mA101
PLL power consumption on VDDA IDDA(PLL)VCO freq = 192 MHzmin 0.3 · max 0.4 mA101
PLL power consumption on VDDA IDDA(PLL)VCO freq = 432 MHzmin 0.55 · max 0.85 mA101
PLLI2S input clock fPLLI2S_INmin 0.95 · typ 1 · max 2.1 MHz101
PLLI2S multiplier output clock fPLLI2S_OUTmax 216 MHz101
PLLI2S VCO output fVCO_OUTmin 192 · max 432 MHz101
PLLI2S lock time tLOCKVCO freq = 192 MHzmin 75 · max 200 us101
PLLI2S lock time tLOCKVCO freq = 432 MHzmin 100 · max 300 us101
Master I2S clock jitter JitterCycle to cycle at 12.288 MHz on 48KHz period, N=432, R=5; RMS; main PLL runningtyp 90 ps102
Master I2S clock jitter JitterCycle to cycle at 12.288 MHz on 48KHz period, N=432, R=5; peak to peak; typical value printed as ±280; main PLL runningtyp 280 ps102
Master I2S clock jitter JitterAverage frequency of 12.288 MHz; N = 432, R = 5; on 1000 samples; main PLL runningtyp 90 ps102
WS I2S clock jitter JitterCycle to cycle at 48 KHz on 1000 samples; main PLL runningtyp 400 ps102
PLLI2S power consumption on VDD IDD(PLLI2S)VCO freq = 192 MHzmin 0.15 · max 0.4 mA102
PLLI2S power consumption on VDD IDD(PLLI2S)VCO freq = 432 MHzmin 0.45 · max 0.75 mA102
PLLI2S power consumption on VDDA IDDA(PLLI2S)VCO freq = 192 MHzmin 0.3 · max 0.4 mA102
PLLI2S power consumption on VDDA IDDA(PLLI2S)VCO freq = 432 MHzmin 0.55 · max 0.85 mA102
Modulation frequency fModmax 10 KHz102
Peak modulation depth mdmin 0.25 · max 2 %102
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C conforming to JESD22-A114; Class 2; except VBATmax 2000 V108
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C conforming to JESD22-C101; Class IImax 500 V108
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLCMOS port; IIO = +8 mA; 2.7 V < VDD < 3.6 Vmax 0.4 V111
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLTTL port; IIO = +8 mA; 2.7 V < VDD < 3.6 Vmax 0.4 V111
Output high level voltage for an I/O pin when 8 pins are sourced at same time VOHTTL port; IIO = +8 mA; 2.7 V < VDD < 3.6 Vmin 2.4 V111
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLIIO = +20 mA; 2.7 V < VDD < 3.6 Vmax 1.3 V111
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLIIO = +6 mA; 2 V < VDD < 2.7 Vmax 0.4 V111
Maximum frequency Fmax(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 2.70 V; compensation cell required above 50 MHzmax 100 MHz113
Maximum frequency Fmax(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 1.8 Vmax 50 MHz113
Maximum frequency Fmax(IO)outOSPEEDRy[1:0] = 11; CL = 10 pF, VDD > 2.70 V; compensation cell required above 50 MHzmax 200 MHz113
Pulse width of external signals detected by the EXTI controller tEXTIpwmin 10 ns113
Rise time trCL = 50 pF; measured from 10% to 90%min 4 · max 20 ns125
Fall time tfCL = 50 pF; measured from 10% to 90%min 4 · max 20 ns125
Rise/ fall time matching trfmtr/tfmin 90 · max 110 %125
Output signal crossover voltage VCRSmin 1.3 · max 2 V125
USB OTG HS operating voltage VDDInput level; voltages measured from local groundmin 2.7 · max 3.6 V125
fHCLK value to guarantee proper operation of USB HS interfacemin 30 MHz125
Frequency (first transition) FSTART_8BIT8-bit ±10%; typ field is Nominalmin 54 · typ 60 · max 66 MHz125
Frequency (steady state) ±500 ppm FSTEADYtyp field is Nominalmin 59.97 · typ 60 · max 60.03 MHz125
Duty cycle (first transition) DSTART_8BIT8-bit ±10%; typ field is Nominalmin 40 · typ 50 · max 60 %125
Duty cycle (steady state) ±500 ppm DSTEADYtyp field is Nominalmin 49.975 · typ 50 · max 50.025 %125
Time to reach the steady state frequency and duty cycle after the first transition TSTEADYmax 1.4 ms125
Clock startup time after the de-assertion of SuspendM TSTART_DEVPeripheralmax 5.6 ms125
Ethernet operating voltage VDDInput level; voltages measured from local groundmin 2.7 · max 3.6 V127
MDC cycle time( 2.38 MHz) tMDCmin 411 · typ 420 · max 425 ns127
Write data valid time Td(MDIO)min 6 · typ 10 · max 13 ns127
Read data setup time tsu(MDIO)min 12 ns127
Read data hold time th(MDIO)min 0 ns127
Power supply VDDAFootnote 1 permits 1.7 V over a reduced temperature range with an external power supply supervisormin 1.8 · max 3.6 V129
Positive reference voltage VREF+Maximum VDDA; footnotes 1, 2 and 3 applymin 1.8 V129
ADC clock frequency fADCVDDA = 1.8 to 2.4 V; footnotes 1 and 3 applymin 0.6 · typ 15 · max 18 MHz129
ADC clock frequency fADCVDDA = 2.4 to 3.6 V; footnote 3 appliesmin 0.6 · typ 30 · max 36 MHz129
External trigger frequency fTRIGfADC = 30 MHz, 12-bit resolutionmax 1764 kHz129
External trigger frequency fTRIGfADC = 30 MHz, 12-bit resolutionmax 17 1/fADC129
External input impedance RAINSee Equation 1 for detailsmax 50 κΩ129
Sampling switch resistance RADCMaximum value for VDD = 1.8 Vmax 6 κΩ129
Internal sample and hold capacitor CADCtyp 4 pF129
Injection trigger conversion latency tlatfADC = 30 MHz; external triggers require an additional 1/fPCLK2 delaymax 0.1 us129
Injection trigger conversion latency tlatExternal triggers require an additional 1/fPCLK2 delaymax 3 1/fADC129
Regular trigger conversion latency tlatrfADC = 30 MHz; external triggers require an additional 1/fPCLK2 delaymax 0.067 us129
Regular trigger conversion latency tlatrExternal triggers require an additional 1/fPCLK2 delaymax 2 1/fADC129
Sampling time tSfADC = 30 MHzmin 0.1 · max 16 us129
Sampling time tSmin 3 · max 480 1/fADC129
Power-up time tSTABtyp 2 · max 3 us129
Total conversion time (including sampling time) tCONVfADC = 30 MHz; 12-bit resolutionmin 0.5 · max 16.4 us130
Total conversion time (including sampling time) tCONVfADC = 30 MHz; 10-bit resolutionmin 0.43 · max 16.34 us130
Total conversion time (including sampling time) tCONVfADC = 30 MHz; 8-bit resolutionmin 0.37 · max 16.27 us130
Total conversion time (including sampling time) tCONVfADC = 30 MHz; 6-bit resolutionmin 0.3 · max 16.2 us130
Total conversion time (including sampling time) tCONVtS for sampling + n-bit resolution for successive approximationmin 9 · max 492 1/fADC130
Sampling rate (fADC = 30 MHz, and tS = 3 ADC cycles) fS12-bit resolution; Single ADCmax 2 Msps130
Sampling rate (fADC = 30 MHz, and tS = 3 ADC cycles) fS12-bit resolution; Interleave Dual ADC modemax 3.75 Msps130
Sampling rate (fADC = 30 MHz, and tS = 3 ADC cycles) fS12-bit resolution; Interleave Triple ADC modemax 6 Msps130
ADC VREF DC current consumption in conversion mode IVREF+typ 300 · max 500 uA130
ADC VDDA DC current consumption in conversion mode IVDDAtyp 1.6 · max 1.8 mA130
Internal reference voltage VREFINT–40 °C < TA < +105 °Cmin 1.18 · typ 1.21 · max 1.24 V135
ADC sampling time when reading the internal reference voltage TS_vrefintmin 10 us135
Internal reference voltage spread over the temperature range VRERINT_sVDD = 3 Vtyp 3 · max 5 mV135
Temperature coefficient TCoefftyp 30 · max 50 ppm/°C135
Startup time tSTARTtyp 6 · max 10 us135
Analog supply voltage VDDAFootnote 1min 1.8 · max 3.6 V135
Reference supply voltage VREF+VREF+ ≤ VDDA; footnote 1min 1.8 · max 3.6 V135
Ground VSSAmin 0 · max 0 V135
Resistive load with buffer ON RLOADmin 5 kΩ135
Impedance output with buffer OFF ROWith buffer OFF, minimum resistive load between DAC_OUT and VSS for 1% accuracy is 1.5 MΩmax 15 kΩ135
Capacitive load CLOADMaximum capacitive load at DAC_OUT pin when buffer is ONmax 50 pF135
Lower DAC_OUT voltage with buffer ON DAC_OUT minmin 0.2 V135
Lower DAC_OUT voltage with buffer OFF DAC_OUT mintyp 0.5 mV136
DAC DC VREF current consumption in quiescent mode (Standby mode) IVREF+With no load, worst code (0x800) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 170 · max 240 uA136
DAC DC VREF current consumption in quiescent mode (Standby mode) IVREF+With no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 50 · max 75 uA136
DAC DC VDDA current consumption in quiescent mode IDDAWith no load, middle code (0x800) on the inputstyp 280 · max 380 uA136
DAC DC VDDA current consumption in quiescent mode IDDAWith no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 475 · max 625 uA136
Differential non linearity Difference between two consecutive code-1LSB) DNLDAC in 10-bit configuration; maximum printed as ±0.5 LSBmax 0.5 LSB136
Differential non linearity Difference between two consecutive code-1LSB) DNLDAC in 12-bit configuration; maximum printed as ±2 LSBmax 2 LSB136
Integral non linearity (difference between measured value at Code i and the value at Code i on a line drawn between Code 0 and last Code 1023) INLDAC in 10-bit configuration; maximum printed as ±1 LSBmax 1 LSB136
Integral non linearity (difference between measured value at Code i and the value at Code i on a line drawn between Code 0 and last Code 1023) INLDAC in 12-bit configuration; maximum printed as ±4 LSBmax 4 LSB136
Offset error (difference between measured value at Code (0x800) and the ideal value = VREF+/2) OffsetDAC in 12-bit configuration; maximum printed as ±10 mVmax 10 mV136
Offset error (difference between measured value at Code (0x800) and the ideal value = VREF+/2) OffsetDAC in 10-bit at VREF+ = 3.6 V; maximum printed as ±3 LSBmax 3 LSB136
Offset error (difference between measured value at Code (0x800) and the ideal value = VREF+/2) OffsetDAC in 12-bit at VREF+ = 3.6 V; maximum printed as ±12 LSBmax 12 LSB136
Gain error Gain errorDAC in 12-bit configuration; maximum printed as ±0.5%max 0.5 %136
Settling time (full scale: for a 10-bit input code transition between the lowest and the highest input codes when DAC_OUT reaches final value ±4LSB tSETTLINGCLOAD ≤ 50 pF, RLOAD ≥ 5 kΩtyp 3 · max 6 us136
Thermal resistance junction-ambient ΘJALQFP100 - 14 × 14 mm / 0.5 mm pitch; Value columntyp 43 °C/W169

Pins, by the datasheet

4
97 PE0
GPIO with alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2 and EVENTOUT; FT I/O. · p. 57
98 PE1
GPIO with alternate functions FSMC_NBL1, DCMI_D3 and EVENTOUT; FT I/O. · p. 57
99 VSS
Ground supply pin. · p. 57
100 VDD
Power supply pin. · p. 57

Open-source boards using it

9See all 9
  • 2 layers90 × 142 mmBigtime, the printed circuit board in 3D

    Bigtime

    cillian64/bigtime

    NTP-controlled clock with big 7-segment displays

    124 parts4
  • 4 layers33.5 × 66.8 mmNet bmp, the printed circuit board in 3D

    Net bmp

    elagil/net-bmp

    An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)

    97 parts3GPL-3.0
  • 4 layers96 × 50 mmSchematics, the printed circuit board in 3D

    Schematics

    artemkorobko/sm2m-sdmmc

    SM2M SDMMC Adapter

    47 parts1
  • 4 layers58.5 × 50.3 mmF407-mainboard, the printed circuit board in 3D

    F407-mainboard

    adrienles/miniMPE

    a sectioned small and low profile MPE MIDI keyboard

    61 parts
  • 4 layers77.8 × 108.6 mmDrone esc march 2026, the printed circuit board in 3D

    Drone esc march 2026

    alexWandugu/4in1-ESC-STM32F407-DRV8323

    Open-source 4-in-1 Electronic Speed Controller (ESC) for quadcopter BLDC motors. Features STM32F407VET6, DRV8323RS gate driver, and MCG4D8N04YHE3-TP MOSFETs. Designed for 4S LiPo (up to ~7A continuous per motor).

    180 partsMIT
  • 4 layers189.6 × 85.9 mmSuper3DMakerSTM, the printed circuit board in 3D

    Super3DMakerSTM

    ChladpavPy/Super3DMaker

    So first I want to explain, why I started this project. I had an old Profi3DMaker 3D printer at home, which was not used for a long time, mainly because of the hardware, which was just outdated.

    147 partsMIT
  • 2 layers120 × 90 mmPLC STM32 Modbus, the printed circuit board in 3D

    PLC STM32 Modbus

    danhmanu/PLC-STM32F407VET6

    Mạch nguyên lý KiCad 10 cho bộ PLC: điều khiển qua LAN bằng Modbus TCP (module W5500 Lite), nạp code qua USB‑C (CH340C), 16 ngõ ra transistor cách ly quang, 10 ngõ vào analog 4–20mA.

    264 parts
  • 2 layers106.7 × 78.4 mmADC, the printed circuit board in 3D

    ADC

    Dinh-Dai/ADC-converter

    199 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32F407VET6?

Yes. The symbol is MCU_ST_STM32F4:STM32F407VETx and the footprint Package_QFP:LQFP-100_14x14mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32F407VET6?

LQFP-100(14x14), with 100 pins. Its footprint is drawn on this page.

Where is the STM32F407VET6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32F407VET6?

JLCPCB lists it as part C28730, with 5,210 in stock; the sellers' links on this page open their listings.

What can replace the STM32F407VET6?

Parts like it in the library: the STM32F407VGT6 by STMicroelectronics, the GD32F407VET6 by GigaDevice Semicon Beijing, the GD32F407VGT6 by GigaDevice Semicon Beijing and the GD32F470VIT6 by GigaDevice Semicon Beijing. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32F407VET6?

9 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.