

DIJOUS 4 PORTES
- Size
- 91.2 × 101.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 75
- Pads
- 256
- Tracks, vias
- 350, 129
- Pours
- 135
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Apr 2024
- Updated
- 25 Apr 2024
Overview
DIJOUS 4 PORTES is an open-source printed circuit board by cooligula, from the cooligula/DIJOUS_4_PORTES repository on GitHub. It is a 2-layer board of 91.2 × 101.1 mm with 66 parts on 75 nets, routed with 350 tracks and 129 vias.
It is built around the PIC32MK0256MCJ048-I/Y8X, TCAN334D and MAX22201ATC+, with the ASZKDV-32.768KHZ-L-T3, BYV10MX-600PQ and ECS-3225SMV-080-GP-TR among its other parts. Its parts include 30 capacitors, 11 connectors, 7 resistors, 6 ICs and 2 diodes. It belongs with the PIC boards of this library.
Main components
6PIC32MK0256MCJ048-I/Y8X
TQFP-48(7x7)-40℃~+85℃ 120MHz 12bit 12bit 2.3V~3.6V 256KB 32 Bit 37 64KB Built-in FLASH MIPS32 microAptiv TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TCAN334D
SOIC-8-40℃~+125℃ 1Mbps 20uA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversMAX22201ATC+
TDFN-12(3x3)Interleaved conduction protection、Current sensing/regulation function、Active braking function TDFN-12(3x3) Brushed DC Motor Drivers ROHSMaxim Integrated (Analog Devices)Stepper Motor DriverASZKDV-32.768KHZ-L-T3
SMD2012-4PSMD2012-4P Crystal Oscillators ROHSAbraconCrystal OscillatorsBYV10MX-600PQ
TO-220F-2Fast Recovery / High Efficiency DiodesWeEn SemiconductorsECS-3225SMV-080-GP-TR
SMD3225-4P-40℃~+105℃ 1.62V~3.63V 10mA 8MHz CMOS SMD3225-4P Crystal Oscillators ROHSECSCrystal Oscillators
README
README.mdView this project on CADLAB.io.
Projecte Eines de Disseny - PORTES
Adrià Brú, Miquel Limón, Lluís Pujadas
Especificacions/Components
| Type | Name | Datasheet | Link | Price |
|---|---|---|---|---|
| uC | PIC32MK0256MCJ048 | uC | Mouser | 7,37 € |
| LDO 3.3V (3A) | LT1528CT#PBF | LDO | Digikey | 5,75 € |
| Motor (588Nm, 280mA) | HG37-200-AA-00 | motor | Mouser | 26,74 € |
| CAN Transciever | TCAN3413DR | can | Mouser | 2,41 € |
| Crystal Osc | ECS-3225SMV-080-GP-TR | clk | Mouser | 1,92 € |
| Driver (3.5A, +csense) | MAX22201ATC+ | driver | Mouser | 1,56 € |
| Zener 12V (150MW) | DDZ9699T-7 | zener | Mouser | 0,41 € |
| Díode | BYV10MX-600PQ | diode | Mouser | 0,54 € |
| RFID | DLP-RFID2 | rfid | Digikey | 35,04 € |
| Motor lineal (150N, 2A) (opc) | DLA-12-5-A-50-IP65 | motor-lineal | Transmotec | 303,5 € |
| Final de Carrera (5V) | ESE-22MV21T | Final-Carrera | Digikey | 0,42 € |
| DC/DC 5V (2A, +/-49.5mV) | P7805-2000R-S | dcdc2A | Mouser | 5,53 € |
| DC/DC 3.3V (3A, +/-33.3mV) | P783-Q24-S3-S | dcdc3A | Mouser | 15,07 € |
| C Tan 1u 20V 3216-18 | T491A105K020AT4360 | ctant1u | Mouser | 0,07 € |
| C Cer 22u 10V 1206 | CL31B226KPHNNWE | cer22u | Mouser | 0,086 € |
| C Cer 22u 50V | KTS500B226M76N0T00 | ccer22u50v | Mouser | 3,58 € |
| C Cer 10n 25V 1206 | KAM31BR81H103KT | ccer10n50v | Mouser | 0,28 € |
| C Ele 4.7u 35V | 865080540002 | cele4.7u | Mouser | 0,17 € |
| C Ele 47u 16V | 860010372004 | cele74u | Mouser | 0,09 € |
| C Cer 1u 25V 0805 | C0805C105K3RAC | cer1u25v | Mouser | 0,021 € |
| C Cer 0.1u 50V 0805 | C0805C104M5RAC | cer100n0805 | Mouser | 0,008 € |
| C Cer 21p 50V 01005 | GRM0225C1H210GA02L | cer21p01005 | Mouser | 0,09 € |
| R 120 125mW 0805 | CQ05WAF1200T5E | r120 | Mouser | 0,002 € |
| R 1k 125mW 0805 | TC05W8F1001T5G | r1k | Mouser | 0,007 € |
| R 330 125mW 0805 | TC0550F3300T5F | r330 | Mouser | 0,007 € |
| R 10k 0.25W 0805 | RNCP0805JTD10K0 | r10k | Mouser | 0,007 € |
| R 100k 125mW 0805 | TC0550F1003T5G | r100k | Mouser | 0,007 € |
| R 33k 125mW 0805 | TC0550D3302T5G | r33k | Mouser | 0,008 € |
Diagrama de blocs

To Do
- Add buttons
- Add power input protection
- Add controls
- Resize boxes to same size (diagram)
- Change "targeta" to "targeta clauer"
- Restructure schematic for simplicity
- Add buttons to schematic
- Add expression for R (ISENSE)
- Change regulator to DC/DC (maybe + regulator)
- PCB v1
- Change 2nd crystal to 32kHz (instead of 8MHz)
- Correct via errors (DRC)
- Solve pcb model compatibility issues
- Rearrange power components
- Remove SPI
- Make budget for different production quantities
- Correct silkscreen
Changelogs
03/04
- Schematic done
- Corrected block diagram
- Added additional data
- Deleted 12V LDO
- Changed current sensor for integrated Driver+Sensor
04/04
- Swapped regulator for DC/DC
- Add expression for R (ISENSE)
- Change regulator to DC/DC (maybe + regulator)
- Restructure schematic for simplicity
- Added 1 extra bit for window control
05/04
- Added all components
- PWR plane done (v1)
06/04
- Corrected PWR
- Started digital
08/04
- Corrected diagram
- Changed from DC/DC to DC/DC (5V) + LDO (3,3V)
- Change second Clk to 32kHz
- Delete JTAG
- Correct oscillator connections
09/04
- Preliminar PCB done
- Added name to file
10/04
- Solved DRC
- Added names to board
11/04
- Changed SMD capacitors to ceramic
13/04
- Rearranged microcontroller pins
14/04
- Rearranged PCB to reduce through-holes
16/04
- Rearranged power stage
17/04
- Switched decoupling capacitors to back layer
18/04
- Solve DRC errors,
- Restructure
- Change decoupling capacitors to bottom layer
- Corrections suggested by Joan
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9, C10, C11, C12 |
| 6 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3, C4, C5, C6, C23, C27 |
| 5 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C22, C24, C25, C26 |
| 5 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C17, C18, C19, C20, C21 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R5, R7 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C14, C28 |
| 2 | MAX22201ATC+ | kicad_models:MAX22201ATC_ | U4, U5 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric | C30 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 1u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C31 |
| 1 | 22u/10V | Capacitor_SMD:C_1206_3216Metric | C33 |
| 1 | 22u/50V | kicad_models:CAPC7563X400N | C32 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_LDO1 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | ASZKDV-32.768KHZ-L-T3 | kicad_models:ASZKDV_ABR | Y1 |
| 1 | BYV10MX-600PQ | Package_TO_SOT_THT:TO-220F-2_Horizontal_TabDown | D2 |
| 1 | CAN | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J4 |
| 1 | DDZ9699T-7 | kicad_models:SODFL1608X65N | D1 |
| 1 | DOOR_LCK | Button_Switch_THT:SW_CW_GPTS203211B | SW1 |
| 1 | DOOR_LCK | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J10 |
| 1 | ECS-3225SMV-080-GP-TR | kicad_models:OSC_ECS-3225SMV-080-GP-TR | Y2 |
| 1 | FINAL_CARRERA_DOWN | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J15 |
| 1 | FINAL_CARRERA_UP | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J14 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | LT1528CT-PBF | kicad_models:LT1528CT#PBF | U1 |
| 1 | OUT_DOOR | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J5 |
| 1 | OUT_WIN | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J2 |
| 1 | P7805-2000R-S | kicad_models:P78032000RS | PS1 |
| 1 | PIC32MK0256MCJ048-I/Y8X | kicad_models:PIC32MK0256MCJ048-I-Y8X_MCH | U2 |
| 1 | PowerIN | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J1 |
| 1 | RFID_COAX | Connector_Coaxial:BNC_TEConnectivity_1478035_Horizontal | J8 |
| 1 | TCAN334D | kicad_models:TCAN3413DR | U3 |
| 1 | USART | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J6 |
| 1 | WIN_SW | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05504HBWC_1x04_P5.00mm_Horizontal | J12 |
| 1 | WIN_SW | Button_Switch_SMD:SW_DIP_SPSTx03_Slide_6.7x9.18mm_W8.61mm_P2.54mm_LowProfile | SW3 |
| 1 | ~ | DLP-RFID2:DLP-RFID2 | U6 |
The 62 most common of 66 parts.
Similar boards
- 2 layers100 × 71 mm

- 2 layers110 × 60 mm

- 4 layers97.1 × 26 mm

- 4 layers188.1 × 79 mm

- 2 layers42 × 42 mm

NEW PCB ADCS
niki100jad/POQUITO_ADCS
ADCS for a PocketQube mission (Warning: Still untested!)
82 parts2 - 4 layers30 × 37.3 mm

- 4 layers60 × 60 mm

AUXSPACE core pcb
AUXSPACEeV/AUX-Core
Core/Master PCB for the Auxspace Avionics stack
83 partsCERN-OHL-P-2.0 - 4 layers32 × 66 mm

Questions
How big is the DIJOUS 4 PORTES PCB?
It measures 91.2 × 101.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DIJOUS 4 PORTES use?
66 parts, built around the PIC32MK0256MCJ048-I/Y8X, TCAN334D, MAX22201ATC+ and ASZKDV-32.768KHZ-L-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DIJOUS 4 PORTES KiCad files?
From the cooligula/DIJOUS_4_PORTES repository on GitHub, at the commit this page was made from: the board is PCB/DIJOUS_4_PORTES.kicad_pcb and its schematic PCB/DIJOUS_4_PORTES.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DIJOUS 4 PORTES design in my own project?
Its repository states no licence, so its author keeps all rights: ask cooligula before reusing the design.