Skip to the content
12345678

TCAN334D

Texas InstrumentsExtended

-40℃~+125℃ 1Mbps 20uA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHS

Part id
ti/TCAN334D
Category
CAN Transceivers
Package
SOIC-8
Pins
8
In stock
235 at JLCPCB (C2871143)
Used on
16 open-source boards

Overview

The TCAN334D is a CAN Transceiver made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1Mbps 20uA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (Interface_CAN_LIN:TCAN334, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 235 are in stock at JLCPCB (part C2871143). 16 open-source boards in 12 repositories on GitHub use it.

Symbol

1TXD2GND3VCC4RXD5SHDN6CANL7CANH8STB
Interface_CAN_LIN:TCAN334From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the TCAN334D
PinNameType
1TXDInput
2GNDPower in
3VCCPower in
4RXDTri-state
5SHDNInput
6CANLInput/output
7CANHInput/output
8STBInput

Open-source boards using it

16See all 16
  • 2 layers110 × 60 mmBms-8s50-ic, the printed circuit board in 3D

    Bms-8s50-ic

    LibreSolar/bms-8s50-ic

    Fully integrated 12V-24V BMS using ISL94202

    171 parts47CC-BY-SA-4.0
  • 4 layers97.1 × 26 mmDiveCAN Head2, the printed circuit board in 3D

    DiveCAN Head2

    QuickRecon/DiveCANHead

    An open source rebreather head controller

    157 parts13MIT
  • 4 layers188.1 × 79 mmJacobi, the printed circuit board in 3D

    Jacobi

    Tecnologic/unimoc_jacobi

    48V at 50A with optimised colling

    248 parts3GPL-3.0
  • 2 layers42 × 42 mmNEW PCB ADCS, the printed circuit board in 3D

    NEW PCB ADCS

    niki100jad/POQUITO_ADCS

    ADCS for a PocketQube mission (Warning: Still untested!)

    82 parts2
  • 4 layers30 × 37.3 mmSensorHub 2.0, the printed circuit board in 3D

    SensorHub 2.0

    artur-erik/Manikin_Hardware

    Sensors and SensorHub PCB Modules. Based on RA4E2

    71 parts
  • 4 layers60 × 60 mmAUXSPACE core pcb, the printed circuit board in 3D

    AUXSPACE core pcb

    AUXSPACEeV/AUX-Core

    Core/Master PCB for the Auxspace Avionics stack

    83 partsCERN-OHL-P-2.0
  • 4 layers32 × 66 mmMain PCB, the printed circuit board in 3D

    Main PCB

    AUXSPACEeV/microMETER

    Minimal Flightcomputer

    90 partsCERN-OHL-P-2.0
  • 4 layers44.2 × 66.5 mmBattery node, the printed circuit board in 3D

    Battery node

    ColtonTshudy/battery-node

    Daisy-chainable battery

    223 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TCAN334D?

Yes. The symbol is Interface_CAN_LIN:TCAN334 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TCAN334D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TCAN334D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TCAN334D?

JLCPCB lists it as part C2871143, with 235 in stock; the sellers' links on this page open their listings.

What can replace the TCAN334D?

Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TCAN334D?

16 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.