

Bms-8s50-ic
Fully integrated 12V-24V BMS using ISL94202
- Size
- 110 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 171
- Nets
- 144
- Pads
- 640
- Tracks, vias
- 1,428, 275
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Aug 2019
- Updated
- 2 Dec 2023
Overview
Bms-8s50-ic is an open-source printed circuit board by LibreSolar, from the LibreSolar/bms-8s50-ic repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 110 × 60 mm with 171 parts on 144 nets, routed with 1,428 tracks and 275 vias.
It is built around the STM32L452CCU6, TCAN334D and TPS560430XDBV, with the 24AA32A/P, BSS138 and BSC016N06NS among its other parts. Its parts include 74 resistors, 36 capacitors, 15 transistors, 14 diodes and 8 connectors. It belongs with the power boards and the STM32 boards of this library.
Main components
11STM32L452CCU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 160KB 256KB 32 Bit 38 80MHz ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TCAN334D
SOIC-8-40℃~+125℃ 1Mbps 20uA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTPS560430XDBV
SOT-23-6-40℃~+125℃@(TJ) 1 1.1MHz 4V~36V 600mA 80uA Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters24AA32A/P
PDIP-8EEPROMMicrochip TechnologyBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBSC016N06NS
TDSON-8FL-55℃~+150℃ 1 N-channel 1.6mΩ@10V 100A 139W 3.3V 6.5nF 60V 96pF TDSON-8FL MOSFETs ROHSInfineon TechnologiesMOSFETsNDS0605
SOT-23-55℃~+150℃ 1 P-Channel 1.7V 1.8nC@10V 10pF 180mA 1Ω@10V 360mW 4pF 60V 79pF P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETsBAV70
SOT-23-55℃~+150℃ 1 Pair Common Cathode 1.25V@150mA 2.5uA@70V 200mA 225mW 2A 6ns 70V SOT-23 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesPMEG6002EJ
SOD-323F1 Independent 100uA@60V 2.75A 200mA 600mV@200mA 60V SOD-323F Schottky Diodes ROHSNexperiaSchottky DiodesSMCJ36A
SMC(DO-214AB)ESD And Surge Protection (TVS/ESD)hongjiachengUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdBMS 8S50 IC
First boards tested, some issues might still be open.

Schematic: PDF file
Bill of Materials: CSV file or interactive HTML BOM
Firmware repository: LibreSolar/bms-firmware
Features:
- 3 to 8 Li-ion cells (e.g. LiFePO4)
- Integrated high-side MOSFET switch and current sensor
- Balancing current approx. 150 mA
- STM32L452 ARM Cortex-M4 microcontroller
- Built-in CAN communication interface and UEXT extension connector
Firmware
The firmware is developed in a separate repository LibreSolar/bms-firmware.
Housing
The PCB is designed such that a heat sink can be easily attached at the bottom. The following images show a draft idea for the housing. The files of the heat sink and the cover can be found in the housing folder as native FreeCAD files.


Important Notice
The PCBs have not been tested regarding EMC and other regulations. If you reproduce the boards, you use them at your own risk and responsibility.
Parts
171| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 1k | LibreSolar:R_0603_1608 | R17, R18, R19, R20, R21, R22, R23, R24, R25, R36, R38, R41, R42, R54 |
| 13 | 100n | LibreSolar:C_0603_1608 | C13, C14, C16, C19, C27, C28, C29, C31, C32, C33, C34, C36, C38 |
| 13 | 10k | LibreSolar:R_0603_1608 | R26, R30, R33, R34, R45, R46, R47, R48, R49, R50, R51, R52, RT2 |
| 11 | 330k | LibreSolar:R_0603_1608 | R9, R10, R11, R12, R13, R14, R15, R16, R27, R43, R73 |
| 9 | 47n | LibreSolar:C_0603_1608 | C1, C2, C3, C4, C5, C6, C7, C8, C20 |
| 8 | 33 | LibreSolar:R_2010_5025 | R1, R2, R3, R4, R5, R6, R7, R8 |
| 7 | BSS138 | LibreSolar:SOT-23 | Q4, Q5, Q6, Q7, Q8, Q14, Q15 |
| 6 | 1M | LibreSolar:R_0603_1608 | R32, R35, R53, R57, R63, R70 |
| 5 | 100 | LibreSolar:R_0603_1608 | R37, R64, R67, R68, R71 |
| 5 | 2.2k | LibreSolar:R_0603_1608 | R39, R55, R56, R65, R66 |
| 4 | 1u | LibreSolar:C_0603_1608 | C9, C11, C12, C39 |
| 4 | 22k | LibreSolar:R_0603_1608 | R29, R31, R40, R44 |
| 4 | BSC016N06NS | LibreSolar:5X6_MOSFET | Q10, Q11, Q12, Q13 |
| 4 | CONN_01X01 | LibreSolar:Wuerth_WP-THRBU_74650195 | P1, P2, P3, P4 |
| 4 | NDS0605 | LibreSolar:SOT-23 | Q1, Q2, Q3, Q9 |
| 3 | 330 | LibreSolar:R_2010_5025 | R60, R61, R62 |
| 3 | 4.7n | LibreSolar:C_0603_1608 | C37, C41, C42 |
| 3 | BAV70 | LibreSolar:SOT-23 | D1, D6, D7 |
| 2 | 10u | LibreSolar:C_0805_2012 | C17, C18 |
| 2 | 12V | Diode_SMD:D_SOT-23_ANK | D8, D9 |
| 2 | LED | LibreSolar:LED_0603_D3.0mm | LED1, LED2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 2 | NRVTS260ESFT1G | Diode_SMD:D_SOD-123 | D11, D12 |
| 2 | PMEG6002 | Diode_SMD:D_SOD-523 | D2, D5 |
| 2 | RJ45_NS | LibreSolar:RJ45_8P8C | JP1, JP2 |
| 2 | SMCJ36A | LibreSolar:D_SMC | D3, D4 |
| 1 | 0.5m | LibreSolar:R_Shunt_2512 | R58 |
| 1 | 0R | LibreSolar:R_0603_1608 | R59 |
| 1 | 10n | LibreSolar:C_0603_1608 | C10 |
| 1 | 120 | LibreSolar:R_1206_3216 | R69 |
| 1 | 24AA32 | LibreSolar:SOT-23-5 | U6 |
| 1 | 4.7u | LibreSolar:C_1210_3225 | C15 |
| 1 | 4.7u | LibreSolar:C_1206_3216 | C21 |
| 1 | 4.7u | LibreSolar:C_0603_1608 | C35 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 470n | LibreSolar:C_0603_1608 | C30 |
| 1 | 47uH | LibreSolar:Bourns_SRN6045TA | L2 |
| 1 | 4R7 | LibreSolar:R_0603_1608 | R72 |
| 1 | 50.5k | LibreSolar:R_0603_1608 | R28 |
| 1 | 8MHz | LibreSolar:Resonator_Murata_CSTNE | Y1 |
| 1 | Bat+ | LibreSolar:TestPoint_1mm_pad | TP4 |
| 1 | CONN_01X02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | P5 |
| 1 | Conn_01x10 | Connector_Molex:Molex_Micro-Fit_3.0_43045-1400_2x07_P3.00mm_Horizontal | J1 |
| 1 | Ext+ | LibreSolar:TestPoint_1mm_pad | TP3 |
| 1 | ISL94202 | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm | U7 |
| 1 | Jumper_NC_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | LIBRE_SOLAR | LibreSolar:LIBRESOLAR_LOGO | LOGO2 |
| 1 | OPEN_HARDWARE | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | LOGO1 |
| 1 | Regout | LibreSolar:TestPoint_1mm_pad | TP5 |
| 1 | SCL | LibreSolar:TestPoint_1mm_pad | TP7 |
| 1 | SDA | LibreSolar:TestPoint_1mm_pad | TP6 |
| 1 | STM32L452CCU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U3 |
| 1 | ST_Nucleo_SWD_5p | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | SWD1 |
| 1 | SW_PUSH | LibreSolar:SW_SPST_6mm | S1 |
| 1 | TCAN334 | LibreSolar:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | TPS560430X | LibreSolar:SOT-23-6 | U1 |
| 1 | UEXT | LibreSolar:Box_Header_2x05x2.54mm_Straight | J2 |
| 1 | USBLC6-2SC6 | LibreSolar:SOT-23-6 | D10 |
| 1 | USB_B_Micro | LibreSolar:USB_Micro-B_10103594-0001LF | J3 |
The 169 most common of 171 parts.
Similar boards
- 2 layers110 × 60 mm

- 2 layers50 × 50 mm

- 6 layers160 × 136 mm

Serie
npgo22/Serie
The board itself is based around an STM32H723, the fastest microcontroller supported by Klipper at the moment.
549 parts - 2 layers

Navigatorschema
maddevsio/mad-navigator
Mad navigator is simple compass-like device shows direction to predefined geo point. This repository contains firmware source code and schematics for device.
107 parts14 - 2 layers50 × 50 mm

- 2 layers124 × 75 mm

GM100
mymy49/GM100
This is an open project created using Nuvoton's M467 MCU for use in gauges or meters.
168 parts1MIT - 2 layers122 × 87 mm

- 2 layers96 × 56 mm

Questions
How big is the Bms-8s50-ic PCB?
It measures 110 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bms-8s50-ic use?
171 parts, built around the STM32L452CCU6, TCAN334D, TPS560430XDBV and 24AA32A/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bms-8s50-ic KiCad files?
From the LibreSolar/bms-8s50-ic repository on GitHub, at the commit this page was made from: the board is kicad/bms-8s50-ic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bms-8s50-ic design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).