
Pico node
Mounith-H/AI-Powered-Edge-Gunshot-Detection-for-Wildlife-Protection
Intelligent gunshot detection system using Raspberry Pi Pico

Mad navigator is simple compass-like device shows direction to predefined geo point. This repository contains firmware source code and schematics for device.
Navigatorschema is an open-source printed circuit board by maddevsio, from the maddevsio/mad-navigator repository on GitHub. It is a 2-layer board with 107 parts on 134 nets, routed with 626 tracks and 42 vias.
It is built around the CP2102N-A01-GQFN28R, NEO-6M and LIS3MDL, with the 24AA32A/P, AMS1117-3.3 and MPU-6050 among its other parts. Its parts include 40 resistors, 31 capacitors, 8 diodes, 5 ICs and 5 switches. It belongs with the STM32 boards of this library.
Mad navigator is simple compass-like device shows direction to predefined geo point. This repository contains firmware source code and schematics for device.
root: Makefile, qtcreator project file (not neccessary to use it), LinkerScript
inc: All include files
src: All firmware source files
startup: Standard startup code
kicad_schema: Schematic
Just use make clean all program . Make sure that your device connected via USB and you have all needed permissions.
You don't need to make clean every time.
make clean all programst-util. It will launch gdb server on localhost:4242.!TODO add link to medium
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 2.2kOhm | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R29, R30, R31, R32, R33, R34, R35, R36, R37 |
| 12 | 100nF | Capacitor_SMD:C_01005_0402Metric | C3, C4, C13, C14, C21, C22, C23, C24, C26, C28, C30, C31 |
| 6 | 0.1uF | Capacitor_SMD:C_01005_0402Metric | C5, C7, C9, C11, C12, C29 |
| 5 | 330 Ohm | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R38, R41 |
| 4 | 10 kOhm | Resistor_SMD:R_0603_1608Metric | R20, R24, R26, R27 |
| 4 | SW_Push_Dual | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1, SW2, SW4, SW5 |
| 3 | 1kOhm | Resistor_SMD:R_0603_1608Metric | R8, R9, R25 |
| 3 | 1uF | Capacitor_SMD:C_01005_0402Metric | C2, C8, C20 |
| 3 | 200 Ohm | Resistor_SMD:R_0603_1608Metric | R11, R13, R39 |
| 3 | 2kOhm | Resistor_SMD:R_0603_1608Metric | R12, R14, R40 |
| 3 | BC547 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP6, JP7, JP9 |
| 2 | 100 Ohm | Resistor_SMD:R_0603_1608Metric | R16, R28 |
| 2 | 10uF | Capacitor_SMD:C_01005_0402Metric | C19, C25 |
| 2 | 20pF | Capacitor_SMD:C_01005_0402Metric | C17, C18 |
| 2 | 4.7kOhm | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 6.8pF | Capacitor_SMD:C_01005_0402Metric | C15, C16 |
| 2 | BAT60JFILM | Diode_SMD:D_SOD-323 | D6, D7 |
| 2 | red | LED_SMD:LED_0201_0603Metric | D5, D8 |
| 1 | 1.25V | Battery:BatteryHolder_Seiko_MS621F | BT1 |
| 1 | 10kOhm | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 10nF | Capacitor_SMD:C_01005_0402Metric | C1 |
| 1 | 1N5817 | Diode_SMD:D_MELF | D2 |
| 1 | 2.2nF | Capacitor_SMD:C_01005_0402Metric | C6 |
| 1 | 220 Ohm | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 22kOhm | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 24AA32A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | 27uH | Inductor_SMD:L_6.3x6.3_H3 | L2 |
| 1 | 4.7uF | Capacitor_SMD:C_01005_0402Metric | C10 |
| 1 | 510 Ohm | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | Antenna_Shield | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | AE1 |
| 1 | CP | Capacitor_SMD:C_01005_0402Metric | C27 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | Conn_ARM_JTAG_SWD_20 | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J4 |
| 1 | ESA8.00000F20D25F | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y2 |
| 1 | FIX | LED_SMD:LED_0201_0603Metric | D3 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP8 |
| 1 | LIS3MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | L1 |
| 1 | MC306-G-06Q-32.768 (JFVNY) | Crystal:Crystal_SMD_0603-4Pin_6.0x3.5mm | Y1 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U1 |
| 1 | NEO-6M | mad_footprints:NEO6-M | N2 |
| 1 | NOKIA5110 | mad_footprints:Nokia5110_blue | N1 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | STM32F100RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | SW_Reed_Opener | Button_Switch_SMD:SW_SPST_REED_CT05-XXXX-G1 | SW3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | fcm1608_0603 | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | green | LED_SMD:LED_0201_0603Metric | D4 |

Mounith-H/AI-Powered-Edge-Gunshot-Detection-for-Wildlife-Protection
Intelligent gunshot detection system using Raspberry Pi Pico

SRiegle2020/ECE49022_SrDsgn_f22_Team44
ECE49022, Team44, f2022. Biometric "Smart" Watch




PeriwalPratham/FlightController
A basic PCB design which contains all components for a solo yet affordable basic drone controller


107 parts, built around the CP2102N-A01-GQFN28R, NEO-6M, LIS3MDL and 24AA32A/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the maddevsio/mad-navigator repository on GitHub, at the commit this page was made from: the board is kicad_schema/navigator_schema/navigatorschema.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask maddevsio before reusing the design.