2 layers110 × 60 mm
2 layers50 × 50 mm
MyTrackr
SukkoPera/MyTrackr7Arduino-Based GPS tracker
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 36
- Pads
- 169
- Tracks, vias
- 512, 70
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Nov 2016
- Updated
- 21 Feb 2021
Overview
MyTrackr is an open-source printed circuit board by SukkoPera, from the SukkoPera/MyTrackr repository on GitHub. It is a 2-layer board of 50 × 50 mm with 40 parts on 36 nets, routed with 512 tracks and 70 vias.
It is built around the 24AA32A/P. Its parts include 10 resistors, 9 connectors, 5 capacitors, 5 switches and 3 ICs. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdMyTrackr
Arduino-Based GPS tracker
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4, C5 |
| 3 | 1k | Resistors_SMD:R_0805_HandSoldering | R6, R7, R8 |
| 2 | 330k | Resistors_SMD:R_0805_HandSoldering | R5, R9 |
| 2 | CONN_01X01 | Sukko:Screw_Hole_Plated_2mm | P2, P3 |
| 2 | D_Schottky | Diodes_SMD:SMA_Handsoldering | D2, D3 |
| 1 | 100 | Resistors_SMD:R_0805_HandSoldering | R10 |
| 1 | 10A45B_Module | Pin_Headers:Pin_Header_Straight_1x03 | J1 |
| 1 | 10k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 1M | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 22 | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 22u | Resistors_SMD:R_0805_HandSoldering | L1 |
| 1 | 24AA32 | w_smd_dil:tssop-8 | U3 |
| 1 | 680 | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | ATMEGA48_88_168_328P-32SMD | Housings_QFP:LQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | BTN_BACK | MyKiCadLibs-Footprints:SW_TACT_SMD | SW5 |
| 1 | BTN_NEXT | MyKiCadLibs-Footprints:SW_TACT_SMD | SW3 |
| 1 | BTN_PREV | MyKiCadLibs-Footprints:SW_TACT_SMD | SW4 |
| 1 | BTN_RESET | Buttons_Switches_SMD:SW_SPST_REED_CT05-XXXX-J1 | SW1 |
| 1 | BTN_SEL | MyKiCadLibs-Footprints:SW_TACT_SMD | SW2 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05 | J3 |
| 1 | CONN_BAT | Pin_Headers:Pin_Header_Straight_1x03 | J4 |
| 1 | CONN_ICSP | Pin_Headers:Pin_Header_Straight_2x03 | J2 |
| 1 | CONN_OLED | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | GPS-NEO-6M | MOUDLE-GPS-NEO-6M_24P-16X12.2MM_:GPS24P-SMD-1.1-16X12.2MM | U2 |
| 1 | GPS_ANTENNA | MyKiCadLibs-Footprints:CONN-RF-UFL | CN1 |
| 1 | GPS_BKP | Battery_Holders:Keystone_3000_1x12mm-CoinCell | BT2 |
| 1 | LED | LEDs:LED_0805 | D1 |
| 1 | LOGO | w_logo:Logo_copper_OSHW_6x6mm | G*** |
| 1 | MICRO_SD | MicroSD GCT-MEM2055-00-190-01-A:GCT-MEM2055-00-190-01-A | CON1 |
| 1 | NO | Resistors_SMD:R_0805_HandSoldering | JP1 |
| 1 | Q_PMOS_GSD | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
Similar boards
- 2 layers
Navigatorschema
maddevsio/mad-navigator
Mad navigator is simple compass-like device shows direction to predefined geo point. This repository contains firmware source code and schematics for device.
107 parts14 - 2 layers110 × 60 mm
- 2 layers139.7 × 73.7 mm
- 2 layers149.4 × 177.4 mm
Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm
EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm
Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm
Questions
How big is the MyTrackr PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MyTrackr use?
40 parts, built around the 24AA32A/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MyTrackr KiCad files?
From the SukkoPera/MyTrackr repository on GitHub, at the commit this page was made from: the board is pcb/KiCad/MyTrackr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MyTrackr design in my own project?
Its repository states no licence, so its author keeps all rights: ask SukkoPera before reusing the design.