
Keypad
souptik-samanta/Soup_Pad
This project involves the assembly of various electronic components, which I will be soldering by hand. Below is the Bill of Materials (BOM) for the project:

Carte électronique du LIDAR CRLG
Lidar is an open-source printed circuit board by CRLG, from the CRLG/HW_LIDAR repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 47 parts on 61 nets.
It is built around the DSPIC33EP256GP502-I/SO, TSR 2-2450 and VL53L0X, with the WS2812B among its other parts. Its parts include 14 capacitors, 10 ICs, 7 resistors, 7 diodes and 5 connectors. It belongs with the PIC boards of this library.
Carte électronique du LIDAR CRLG
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_1206_3216Metric | C3, C5, C8, C9, C10, C11, C12, C13, C14 |
| 6 | VL53L0X | VL53L0X:VL53L0x_1x06_P2.54mm_Vertical | U4, U5, U6, U8, U9, U10 |
| 6 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5, D6, D7 |
| 4 | 4.7k | Resistor_SMD:R_1206_3216Metric | R1, R2, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 3 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2, J8, J9 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R3, R7 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric | C2, C6 |
| 2 | 220u | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C4, C7 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_XT30 | Connector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J1 |
| 1 | DSPIC33EP256GP502 | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | MCP1804x-3302xDB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MCP23017_SP | Package_DIP:DIP-28_W7.62mm | U7 |
| 1 | TSR_2-2450 | Convert_DCDC:Converter_DCDC_TRACO_TSR-2_THT | U3 |

souptik-samanta/Soup_Pad
This project involves the assembly of various electronic components, which I will be soldering by hand. Below is the Bill of Materials (BOM) for the project:

Forestierr/Light_trainer
Light pour l'entrainement sportif, physique et mental.

leastrobino/acoustic-levitation
Mirror of GitLab repository, all issues and pull requests should be created there.

theHeathLee/Connected-Oldtimer
📡🚎Connectivity Project for my old volkswagen

NorthStarUAS/aura-hardware-legacy
Legacy hardware designs to support the Rice Creek USA (formerly AuraUAS) system. With the new fmu port on top of the Ardupilot AP_HAL layer, custom built hardware is no longer necessary.


About-Time-Technologies/MHCI
Modular Hardware Control Interface - Components for the Events Industry

noradtux/evnotipi-watchdog
To build and upload attach the Trinket M0 by USB and run .
47 parts, built around the DSPIC33EP256GP502-I/SO, TSR 2-2450, VL53L0X and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CRLG/HW_LIDAR repository on GitHub, at the commit this page was made from: the board is Lidar.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).