
Acoustic levitation main
leastrobino/acoustic-levitation
Mirror of GitLab repository, all issues and pull requests should be created there.

Extension dsPIC (GPIO / analog / codeur) pour Raspberry Pi
RPI Peripheral Expander is an open-source printed circuit board by CRLG, from the CRLG/HW_RPI_DSPIC_EXPANDER repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 56 mm with 66 parts on 62 nets, routed with 362 tracks and 2 vias.
It is built around the TSR 2-2450 and M2.5. Its parts include 20 capacitors, 20 resistors, 17 connectors, 4 ICs and 1 diode. It belongs with the PIC boards of this library.
Extension dsPIC (GPIO / analog / codeur) pour Raspberry Pi
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | R | Resistor_SMD:R_1206_3216Metric | R7, R8, R9, R10, R12, R13, R15, R16, R17, R18, R19, R20 |
| 6 | Value | Capacitor_SMD:C_1206_3216Metric | C12, C13, C14, C15, C17, C18 |
| 5 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5 |
| 5 | 47u | Capacitor_SMD:C_1206_3216Metric | C4, C5, C10, C16, C20 |
| 5 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2, J3, J4, J13, J14 |
| 4 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J6, J7, J8, J9 |
| 4 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J5, J10, J11, J12 |
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MK1, MK2, MK3, MK4 |
| 3 | 100n | Capacitor_SMD:C_1206_3216Metric | C6, C7, C19 |
| 3 | 220u | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C1, C3, C8 |
| 3 | 4.7k | Resistor_SMD:R_1206_3216Metric | R6, R11, R14 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric | C9, C11 |
| 2 | Conn_01x03 | Servomotors:Servomotor-3x254 | J15, J16 |
| 2 | TSR_2-2450 | Convert_DCDC:Converter_DCDC_TRACO_TSR-2_THT | U1, U3 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | Conn_XT30 | Connector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J1 |
| 1 | DSPIC33FJ128MC802-xSP | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | MCP1804x-3302xDB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |

leastrobino/acoustic-levitation
Mirror of GitLab repository, all issues and pull requests should be created there.

theHeathLee/Connected-Oldtimer
📡🚎Connectivity Project for my old volkswagen

NorthStarUAS/aura-hardware-legacy
Legacy hardware designs to support the Rice Creek USA (formerly AuraUAS) system. With the new fmu port on top of the Ardupilot AP_HAL layer, custom built hardware is no longer necessary.


About-Time-Technologies/MHCI
Modular Hardware Control Interface - Components for the Events Industry

noradtux/evnotipi-watchdog
To build and upload attach the Trinket M0 by USB and run .

Unimakers/Docs-Unimakers-CDR-2024
La sous répertoire dédiée a l'équipe d'unimakers de la coupe de France de robotique 2024

It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
66 parts, built around the TSR 2-2450 and M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CRLG/HW_RPI_DSPIC_EXPANDER repository on GitHub, at the commit this page was made from: the board is RPI_Peripheral_Expander.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).