
SparkFun Stepper Motor Breakout TC78H670FTG panelized
sparkfun/SparkFun_Stepper_Motor_Breakout_TC78H670FTG
A 2.5V-16V, 2A bipolar stepper motor driver in a compact form factor (0.6″×0.8″) for the Toshiba TC78H670FTG.

sparkfun/SparkFun_Stepper_Motor_Breakout_TC78H670FTG
A 2.5V-16V, 2A bipolar stepper motor driver in a compact form factor (0.6″×0.8″) for the Toshiba TC78H670FTG.

Spctom/Interface-STEVAL-IPM20B
PCB de interface para a placa de avaliação STEVAL-IPM20B (KiCad)

Spectating101/hardware-splicer
Auditable hardware bring-up: donor → KiCad carrier + DRC + bench gates → PROJECT_PACKAGE. Seeking 3 design partners.

speters/CNC_BoosterWing
CNC breakout board for the TM4C1294CL Launchpad running grbHAL

Spiros7bit/SSVEP-Based-Brain-Computer-Interface-BCI
This repository contains the code and hardware design used in my thesis on Steady-State Visually Evoked Potential (SSVEP) Brain-Computer Interfaces.

Srushti-D-Hebbar/12v-ac-to-dc-converter
Two-layer KiCad PCB for converting 12V AC to unregulated DC using a full-wave bridge rectifier, capacitor filtering, and LED power indication.

ssfrr/ftsh_breakout
This is a breakout board to connect a J-Link LITE CortexM-9 to a breadboard.

SshgurkiratSingh/CONTROL_PANEL_ARDUINO
An integrated, multi-interface hardware control platform that bridges physical inputs, microcontrollers, desktop GUIs, and web services.

ssjrocks/cyd-obd-adapter
Open low-level OBD-II adapter: ESP32 with HS-CAN, single-wire CAN, flex CAN, 2x K-line, L-line and pin voltage probes, exposed over BT Classic, BLE, WiFi and USB as a raw proxy. KiCad 10, JLCPCB-ready.


StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol
Solar-powered LoRaWAN weather station — 3 custom PCBs, bare-metal STM32, 4.3 km verified link


starkensan/RP2040-Zero-Pico-Debug-Adapter
KiCad 9 project for a small 2-layer adapter PCB that mounts a Waveshare RP2040-Zero module and exposes the debugprobe-zero SWD/UART signals for Raspberry Pi Pico targets.


Stary2001/hdmi-switch
I couldn't find one of these easily, so I decided to make one myself.


ste-man/safety-edge-interface
Dual channel 24VDC interface for 8.2kΩ safety edge, with potential free relays and PNP output

stefanhepp/design-libs
Various Designs and Files for my CNC machine.

stefvanson/audio-board
Audio interface board design (PCB) for recording and playing back audio, MIDI IO and some additional IO.





SteveMayze/XBee-Adaptor
A small 2.54mm breakout board for XBee so that it can be used on Breadboard