Skip to the content
2 layers36 × 25 mmInterface, the printed circuit board in 3D
Size
36 × 25 mm
Copper layers
2
Thickness
0.96 mm
Parts
32
Nets
34
Pads
129
Tracks, vias
222, 36
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Dec 2023
Updated
5 Sep 2024

Overview

Interface is an open-source printed circuit board by Step7dk, from the Step7dk/Sabre-Lite--2--PCI-e-interconnect repository on GitHub. It is a 2-layer board of 36 × 25 mm with 32 parts on 34 nets, routed with 222 tracks and 36 vias.

It is built around the AMS1117-1.8 and PI6CG18201ZDIEX. Its parts include 15 capacitors, 7 resistors, 2 ICs, 2 connectors and 1 crystal. It belongs with the interfaces and adapters boards of this library.

Main components

2

README

README.md

Sabre Lite -2- PCI-e interconnect

Parts

32
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3, C6, C9, C10, C15
40Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR4, R5, R6, R7
410uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C4, C7, C13
41uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C5, C8, C14
28pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11, C12
11Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
112VTestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mmTP1
11R5Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
125MHzCrystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSolderingY1
1AMS1117-1.8Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1Conn_01x07_MountingPinConnector_Molex:Molex_PicoBlade_53047-0710_1x07_P1.25mm_VerticalJ1
1GNDTestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mmTP2
1MountingHoleMountingHole:MountingHole_3.2mm_M3_ISO14580H1
1PCI_Express_x1 female connectorKharars-KiCAD-lib:PCIE03602FDTHJ2
1PI6CG18201ZDIEXPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmIC1
1RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3

The 30 most common of 32 parts.

Similar boards

  • 4 layers55 × 100.5 mmOSS Radio Hardware Design, the printed circuit board in 3D

    OSS Radio Hardware Design

    Arkos-Engineering/HT-15_hardware

    We can split this out into separate repos later, right now its very convenient to have everything here.

    256 parts72
  • 2 layers100 × 70 mmRTD2662Board, the printed circuit board in 3D

    RTD2662Board

    KerJoe/RTD2662Board

    Prototype board for RTD2662 display controller

    259 parts24
  • 2 layers85 × 99.6 mmBadge, the printed circuit board in 3D

    Badge

    urish/aramcon-badge

    Just a badge

    93 parts18
  • 4 layers100 × 100 mmProgrammer, the printed circuit board in 3D

    Programmer

    FrankBuss/bloxorz

    105 parts12
  • 4 layers203.2 × 101.6 mmLboard2, the printed circuit board in 3D

    Lboard2

    electrodyssey/lboard2

    experimental Spartan-6 sound processing board with XC6SLX9-TQG144 and TLV320AIC3204

    230 parts7LGPL-3.0
  • 4 layers97.3 × 69.6 mmAtariHDisk4, the printed circuit board in 3D

    AtariHDisk4

    smonson78/smonson-disk

    SD card to ACSI hard drive interface

    77 parts5GPL-3.0
  • 4 layers99.5 × 65 mmEcho, the printed circuit board in 3D

    Echo

    rh1tech/echo

    Echo: ESP32-Based VGA Board

    181 parts4
  • 4 layers329.5 × 199.5 mmKEPR, the printed circuit board in 3D

    KEPR

    RapportTecnologia/kit-de-prototipacao-educacional-e-engenharia

    KEPR - Kit Educacional de Prototipação Rapport, é um kit que visa trazer total flexibilidade ao desenvolvimento de sistemas embarcados e IoT, permitindo trocar facilmente o processador e até mesmo Rede e WiFi sem…

    38 parts3

Questions

How big is the Interface PCB?

It measures 36 × 25 mm and has 2 copper layers, 0.96 mm thick.

What parts does the Interface use?

32 parts, built around the AMS1117-1.8 and PI6CG18201ZDIEX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Interface KiCad files?

From the Step7dk/Sabre-Lite--2--PCI-e-interconnect repository on GitHub, at the commit this page was made from: the board is Interface.kicad_pcb and its schematic Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Interface design in my own project?

Its repository states no licence, so its author keeps all rights: ask Step7dk before reusing the design.