Skip to the content
2 layers35.2 × 29.5 mmXbee adapter, the printed circuit board in 3D

Xbee adapter

SteveMayze/lps-x-1

XBee adapter for the LPS-1 project

Size
35.2 × 29.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
22
Pads
37
Tracks, vias
20, 0
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
28 Jan 2024
Updated
15 May 2024

Overview

Xbee adapter is an open-source printed circuit board by SteveMayze, from the SteveMayze/lps-x-1 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 35.2 × 29.5 mm with 14 parts on 22 nets, routed with 20 tracks and 0 vias.

Its parts include 2 resistors and 2 connectors. It belongs with the interfaces and adapters boards of this library.

Parts

14
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5_DIN965H1, H2, H3, H4
2270ΩResistor_SMD:R_0805_2012MetricR1, R2
2logosjm-mechanical:MyBasic_rounded_50_1Lg2, Lg4
2logoSymbol:KiCad-Logo2_5mm_SilkScreenLg1, Lg3
1DIGI_XBEEXBee-Adapter:XBEE_S2CM1
1IndicatorConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1MCUConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1boardsjm-mechanical:Board RefBrd1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Xbee adapter PCB?

It measures 35.2 × 29.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Xbee adapter use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Xbee adapter KiCad files?

From the SteveMayze/lps-x-1 repository on GitHub, at the commit this page was made from: the board is pcb/xbee-adapter.kicad_pcb and its schematic pcb/xbee-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Xbee adapter design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).