Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers21.6 × 24.8 mmJst breakout, the printed circuit board in 3D

    Jst breakout

    stevenpetryk/pololu-micro-metal-gearmotor-breakout

    A breakout board for Pololu micro metal gearmotor encoder connectors.

    4 partsWTFPL
  • 4 layers88.6 × 54.8 mmWorlds worst audio interface, the printed circuit board in 3D

    Worlds worst audio interface

    stevenwdyer/worlds-worst-audio-interface

    Custom audio streaming PCB with a 480 MHz STM32H7 microcontroller

    121 partsMIT
  • 4 layers50 × 70 mmOdsci, the printed circuit board in 3D

    Odsci

    sthivaios/odsci

    An STM32-based USB interface for DS18B20 temperature sensors

    35 parts
  • 2 layers148.2 × 121.2 mmRrc interface, the printed circuit board in 3D

    Rrc interface

    stianeklund/rrc-interface-pcb

    A horribly designed DIY remote rig interface

    58 parts
  • 4 layers100 × 81 mmCanary, the printed circuit board in 3D

    Canary

    stoatworks-labs/canary

    Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b audiotechnik.

    76 parts
  • 2 layers43.2 × 17.8 mmArduinoISP, the printed circuit board in 3D

    ArduinoISP

    stonedDiscord/ArduinoISP

    A PCB to use an Arduino Nano as an In-Circuit Serial Programmer (ISP) for programming AVR microcontrollers.

    16 partsBSD-2-Clause
  • 2 layers40 × 28.8 mmStm32-i2c board, the printed circuit board in 3D

    Stm32-i2c board

    StratakisStavros/Microcontroller-Projects

    STM32 PCB design and Arduino instrumentation: KiCad sources, design verification, manufacturing exports, serial visualization and data logging.

    32 parts
  • 2 layers13.5 × 40 mmUPDIProgrammer, the printed circuit board in 3D

    UPDIProgrammer

    stuartpittaway/UPDIProgrammer

    Simple UPDI Serial programmer

    16 partsGPL-3.0
  • 4 layers32 × 20 mmMc screen breakout, the printed circuit board in 3D

    Mc screen breakout

    sugo14/Watch

    E-paper smartwatch from scratch

    28 parts
  • 2 layers40 × 45 mmLevel Shifter Board, the printed circuit board in 3D

    Level Shifter Board

    suidroot/LevelShifter

    A Board Design for the SN74LVC244 chip to shift from 5v to 3.3v

    10 parts
  • 2 layers102.4 × 43 mmTemp sense redesign, the printed circuit board in 3D

    Temp sense redesign

    sujinshakyaut/temp_sense_e27

    Dedicated thermal monitoring module designed to interface with 24 thermistors per board for high-density temperature sensing.

    100 parts
  • 2 layers88.8 × 42.8 mmAdapter, the printed circuit board in 3D

    Adapter

    Supertiger576/USB-C-to-3.5mm-adapter

    An adapter using a DAC that translates USB-C audio data to 3.5mm.

    20 parts
  • 2 layers17.8 × 12.7 mmSerial isolator, the printed circuit board in 3D

    Serial isolator

    svanheule/serial-isolator

    Dual isolator board design

    5 parts
  • 4 layers24.9 × 20 mmUSB UART Converter ch32x033, the printed circuit board in 3D

    USB UART Converter ch32x033

    svddevelop/x033_Converter_CDC_UART_SPI_I2C_PIN

    CH32X033 as a USB multitool that allows you to configure pin, UART, SPI, and I2C settings through a terminal.

    9 parts
  • 2 layers48 × 48 mmSTM32 Drone Flight Controller, the printed circuit board in 3D

    STM32 Drone Flight Controller

    svndu-dex/STM32-Flight-Controller-PCB

    Custom STM32F411-based flight controller PCB designed in KiCad with MPU6050 integration, UART communication, SWD debugging, and PWM motor outputs.

    15 parts
  • 2 layers145 × 64.5 mmBreakout, the printed circuit board in 3D

    Breakout

    swhelan123/kicad-teensy4.1-breakout

    20 parts
  • 2 layers54.5 × 32 mmJTAG 2x7 2mm 2 2-54mm, the printed circuit board in 3D

    JTAG 2x7 2mm 2 2-54mm

    sx4n18/PCB_JTAG_conver

    The PCB design project of KiCad for my JTAG converter

    2 parts
  • 2 layersD7811g breakout board, the printed circuit board in 3D

    D7811g breakout board

    synthead/d7811g-breakout-board

    Breakout board to socket the NEC D7811G CPU

    8 parts
  • 2 layers50 × 40 mmBondTest72-Mezzanine70, the printed circuit board in 3D

    BondTest72-Mezzanine70

    szfate/BondTest72-Mezzanine70

    Mezzanine70 adapter board for BondTest72

    22 parts
  • 2 layers52.5 × 98 mmDb25-bob io, the printed circuit board in 3D

    Db25-bob io

    Szymon423/Mesa-7i96s-P1-Port-BOB

    Isolated I/O breakout board for the Mesa 7i96S P1 (DB25) port – 12× 24 V opto-isolated inputs, 5× SSR outputs, DIN-rail mount. KiCad 10, LinuxCNC.

    107 partsCC-BY-4.0
  • 2 layers82 × 44 mmUSB DMX interface, the printed circuit board in 3D

    USB DMX interface

    szzazi/USB-DMX-interface

    Isolated DMX interface which clone of the Entech Open DMX.

    34 parts