
Graphics card rev-2
ShaneTWilliams/worlds-worst-graphics-card
Custom HDMI transmitter PCB with 480 MHz STM32H7 microcontroller

Custom audio streaming PCB with a 480 MHz STM32H7 microcontroller
Worlds worst audio interface is an open-source printed circuit board by stevenwdyer, from the stevenwdyer/worlds-worst-audio-interface repository on GitHub, published under the MIT licence. It is a 4-layer board of 88.6 × 54.8 mm with 121 parts on 175 nets, routed with 698 tracks and 175 vias.
It is built around the AMS1117-1.8, AMS1117-3.3 and NMJ6HCD2, with the PJ-320A and ZXMN2A01FTA among its other parts. Its parts include 56 capacitors, 27 resistors, 7 ICs, 1 diode and 1 transistor. It belongs with the audio and music and interfaces and adapters boards and the STM32 boards of this library.
This board consists of a TLV320AIC3100 audio codec, interfaced with a dual-core 480 MHz STM32H745IIT6 microcontroller, a 1/4" stereo jack with an op-amp buffer and inverting amplifier circuit, and a 1/8" headphone jack. It is USB-powered and uses SWD for flash and debug.
The goal of this project is to give me a custom, bare-metal platform on which I can try my hand at implementing audio effect algorithms from scratch, as well as record my own music.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C12, C13, C18, C19, C25, C28, C29, C30, C31, C33, C34, C35, C36, C37, C38 +14 |
| 8 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | 1V8, 3V3A, ERR, IND1, IND2, IND3, OK, WRN |
| 7 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R9, R19, R22, R23, R25, R27 |
| 7 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C10, C11, C16, C17, C55 |
| 6 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C21, C22, C32, C42, C56 |
| 6 | 680 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13, R14, R15, R16, R17 |
| 3 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23, C26, C27 |
| 3 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R8, R10 |
| 3 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C8, C24 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R26 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 47u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C52, C53 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | RESET, USER |
| 1 | +1V8 | TestPoint:TestPoint_Pad_D1.0mm | 1V8 |
| 1 | +3.3VA | TestPoint:TestPoint_Pad_D1.0mm | 3V3A |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D1.0mm | 3V3 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 12.288MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1k@100MHz | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 1 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 33.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 3V3_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | 3V3 |
| 1 | 470n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | AMS1117-1.8 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | DEBUG |
| 1 | HPL | TestPoint:TestPoint_Pad_D1.0mm | HPL |
| 1 | HPR | TestPoint:TestPoint_Pad_D1.0mm | HPR |
| 1 | I2C_SCL | TestPoint:TestPoint_Pad_D1.0mm | SCL |
| 1 | I2C_SDA | TestPoint:TestPoint_Pad_D1.0mm | SDA |
| 1 | LT3042xMSE | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U3 |
| 1 | MIC1LP | TestPoint:TestPoint_Pad_D1.0mm | MIC1LP |
| 1 | NMJ6HCD2 | Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal | INPUT |
| 1 | OPA2376xxD | Library:OPA2376AID | U6 |
| 1 | PJ-320A | Library:PJ-320A | HEADPHONE |
| 1 | SMF5V0A | Diode_SMD:D_SMF | D1 |
| 1 | STM32H745IITx | Package_QFP:LQFP-176_24x24mm_P0.5mm | U5 |
| 1 | TLV320AIC3100 | Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U4 |
| 1 | U5A+ | TestPoint:TestPoint_Pad_D1.0mm | U5A+ |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | DATA |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | PWR |
| 1 | USB_D+ | TestPoint:TestPoint_Pad_D1.0mm | D+ |
| 1 | USB_D- | TestPoint:TestPoint_Pad_D1.0mm | D- |
| 1 | USB_VIN | TestPoint:TestPoint_Pad_D1.0mm | VIN |
| 1 | ZXMN2A01F | Package_TO_SOT_SMD:SOT-23 | Q1 |

ShaneTWilliams/worlds-worst-graphics-card
Custom HDMI transmitter PCB with 480 MHz STM32H7 microcontroller

Hirusha785/usb-c-pd-buck-converter
🔌 A compact USB-C Power Delivery converter PCB that negotiates PD input and steps it down to a stable DC output. Includes schematic, PCB layout, and 3D render files. 🔋



grasevski/midiguitar
Guitar midi controller + synthesizer using an STM32 Nucleo-L432KC

RaviKachhwaha/AuraForge-50X
A 4-layer programmable PCB board audio platform featuring an ESP32 DSP core, 50Hz Wi-Fi CSI radar, 2x50W TPA3116D2 Class-D amp, hybrid dual-rail power (10A TPS61088 3.7V-to-12V boost & 12–21V DC jack), 3A USB-C fast…

lxdinh/Piano_Prof
Custom PCB hardware controller integrated with a responsive LED strip, designed to provide real-time feedback for interactive piano instruction

It measures 88.6 × 54.8 mm and has 4 copper layers, 1.58 mm thick.
121 parts, built around the AMS1117-1.8, AMS1117-3.3, NMJ6HCD2 and PJ-320A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the stevenwdyer/worlds-worst-audio-interface repository on GitHub, at the commit this page was made from: the board is hardware/worlds-worst-audio-interface.kicad_pcb and its schematic hardware/worlds-worst-audio-interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).