Skip to the content
2 layers148.2 × 121.2 mmRrc interface, the printed circuit board in 3D

A horribly designed DIY remote rig interface

Size
148.2 × 121.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
58
Nets
62
Pads
226
Tracks, vias
400, 45
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
8 Sep 2023
Updated
5 Oct 2023

Overview

Rrc interface is an open-source printed circuit board by stianeklund, from the stianeklund/rrc-interface-pcb repository on GitHub. It is a 2-layer board of 148.2 × 121.2 mm with 58 parts on 62 nets, routed with 400 tracks and 45 vias.

It is built around the ESP32-DEVKITC-VE. Its parts include 21 connectors, 19 capacitors, 14 resistors and 2 ICs. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.

Main components

1

Parts

58
QtyValueFootprintReferences
140.1uFCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C6, C9, C10, C11, C12, C13, C14, C15, C16, C17, C21
142.2KResistor_SMD:R_0603_1608MetricR2, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20
210 uFCapacitor_SMD:CP_Elec_3x5.3C7, C20
2Input Only PinsConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ10, J11
10.1 uFCapacitor_SMD:C_0603_1608MetricC4
10.1uFCapacitor_SMD:C_0402_1005MetricC8
1330 pFCapacitor_SMD:C_0603_1608MetricC5
13V & GNDConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ16
16P6C RRCLibrary:RJ12_Amphenol_54601J1
1ADG884xRMPackage_SO:MSOP-10_3x3mm_P0.5mmU1
1AF GainConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ18
1Audio OutputConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ6
1Conn_01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ13
1Conn_01x06Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_VerticalJ4
1ESP32-DevKitCPCM_Espressif:ESP32-DevKitCU2
1Flash modeConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ8
1IF ShiftConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ19
1Jumper_2_OpenConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1Magnetic Rotary EncoderConnector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_VerticalVFO1
1Mic inputConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ14
1PassthroughConnector_RJ:RJ45_Amphenol_RJHSE538XJ21
1PttConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ2
1RF GainConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ17
1RRC Optional Config DIP SocketPackage_DIP:DIP-18_W7.62mm_SocketJ7
1Rit Xit ValueConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ15
1SPI BreakoutConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ9
1SpareConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ20
1TF SetConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ3
1To RRCConnector_RJ:RJ45_Amphenol_RJHSE538XJ5
1UART SocketConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ12

More from stianeklund/rrc-interface-pcb

4
  • 2 layers80.1 × 62.1 mmSwitch board cpy, the printed circuit board in 3D

    Switch board cpy

    stianeklund/rrc-interface-pcb

    A horribly designed DIY remote rig interface

    26 parts
  • 2 layers84.7 × 52.8 mmSwitch board, the printed circuit board in 3D

    Switch board

    stianeklund/rrc-interface-pcb

    A horribly designed DIY remote rig interface

    9 parts
  • 2 layers37 × 36.4 mmPot board, the printed circuit board in 3D

    Pot board

    stianeklund/rrc-interface-pcb

    A horribly designed DIY remote rig interface

    3 parts
  • 2 layers15.2 × 27.5 mmSpeaker ptt board, the printed circuit board in 3D

    Speaker ptt board

    stianeklund/rrc-interface-pcb

    A horribly designed DIY remote rig interface

    2 parts

Similar boards

  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers115 × 75 mmSpinCoater, the printed circuit board in 3D

    SpinCoater

    RParkerE/OpenSilicon

    OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.

    11 parts55GPL-3.0
  • 2 layers127.3 × 54.1 mmESP32 SolarBox, the printed circuit board in 3D

    ESP32 SolarBox

    cole8888/SRNE-Solar-Charge-Controller-Monitor

    Read data from SRNE solar charge controllers.

    34 parts42
  • 2 layers62.2 × 57.1 mmWs2mqtt, the printed circuit board in 3D

    Ws2mqtt

    Tho85/ws2mqtt

    Connect WiSafe2 devices to Home Assistant

    8 parts28BSD-3-Clause
  • 2 layers99.9 × 99.9 mmSplit flap, the printed circuit board in 3D

    Split flap

    tinkermax/split-flap

    DIY mechanical spli-flap display

    28 parts13CC-BY-4.0
  • 2 layersJF ECU32, the printed circuit board in 3D

    JF ECU32

    JoachimF/JF-ECU32

    RC Jet Engine ECU

    27 parts12GPL-3.0
  • 2 layers72.5 × 84.8 mmDevboard, the printed circuit board in 3D

    Devboard

    ste2425/PSP-Bluetooth-AVConnector

    An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)

    13 parts12
  • 2 layers100 × 88.9 mmGen2, the printed circuit board in 3D

    Gen2

    Alignof/Juggernaut

    疑似時限爆弾解除競技

    41 parts10MIT

Questions

How big is the Rrc interface PCB?

It measures 148.2 × 121.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rrc interface use?

58 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rrc interface KiCad files?

From the stianeklund/rrc-interface-pcb repository on GitHub, at the commit this page was made from: the board is rrc-interface.kicad_pcb and its schematic pot_board/pot_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rrc interface design in my own project?

Its repository states no licence, so its author keeps all rights: ask stianeklund before reusing the design.