
Receiver
mvanbrab/water-level
A project to measure the water level in a water reservoir, using a waterproof ultrasonic sensor

Read data from SRNE solar charge controllers.
ESP32 SolarBox is an open-source printed circuit board by cole8888, from the cole8888/SRNE-Solar-Charge-Controller-Monitor repository on GitHub. It is a 2-layer board of 127.3 × 54.1 mm with 34 parts on 84 nets, routed with 253 tracks and 0 vias.
It is built around the MAX3232ID and ESP32-DEVKITC-VE. Its parts include 17 capacitors, 7 connectors, 6 resistors and 4 ICs. It belongs with the power boards and the ESP32 and ESP8266 boards of this library.
Read data from SRNE solar charge controllers via modbus over RS232.
This repository contains several example programs for reading data from SRNE solar charge controllers using Raspberry Pi, ESP32, ESP8266 and Arduino Nano / Uno.
Based on the modbus manuals, this should also work with some Renogy controllers, but I don't have one to test with. Also, verify the wiring is compatible with your controller.
Here are some example programs to get started. If you follow the setup instructions in the readme files of each directory, you should be able to talk to your controller. If you are just getting started, don't use the MQTT ones.
I've included an example web interface you can use in combination with the MQTT-enabled example programs. To use it, you will need to setup an MQTT broker such as Mosquitto or use a cloud broker. You will also need to set all the appropriate settings in the chosen program and the index.js file.

I also included my custom web interface which I am using for my setup. It has the ability to read data from and control smart plugs flashed with Tasmota.
The setup I use is a customized version of the ESP32 Example, I also designed a custom PCB. Have a look at My-Current-Setup if you want some inspiration for your own setup!

If you notice lots of timeouts, or other errors, try some these steps before creating an issue:
If these don't help or if you need clarification, feel free to create an issue and I'll see what I can do!
I've included the SRNE modbus manual if you want to have a look at it. My examples read all the registers I think are important, but there are lots of other registers which I haven't touched. Be careful, some of them can be written to!
The Python version was originally based on: http://vcsco.com/uncategorized/renogy-rover-monitoring-with-the-raspberry-pi/
The Web-Interface was originally based on: https://github.com/fabaff/mqtt-panel
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.47uF | Library:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C4, C7, C9, C10, C13, C14, C15, C17 |
| 6 | 1K | Library:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | 6P6C | Library:RJ12_Amphenol_54601 | J2, J3, J4, J5, J6, J7 |
| 3 | 0.1uF | Library:C_Disc_D5.0mm_W2.5mm_P2.50mm | C11, C12, C16 |
| 3 | 10uF | Library:CP_Radial_D6.3mm_P2.50mm | C2, C5, C8 |
| 3 | MAX3232 | Library:DIP-16_W7.62mm | U2, U3, U4 |
| 2 | 1000uF | Library:CP_Radial_D12.5mm_P5.00mm | C1, C6 |
| 1 | ESP32-DevKitC | Library:ESP32-DevKitC | U1 |
| 1 | Screw_Terminal_01x03 | Library:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | J1 |

mvanbrab/water-level
A project to measure the water level in a water reservoir, using a waterproof ultrasonic sensor

doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!


zephray/ELTerm
ANSI/VT100-compatible serial terminal built with Raspberry Pi Pico and EL640.480-AM/AG screen


Tjeerdie/SPECTRE
Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.

scrapcomputing/ThrottleBlaster
A Turbo circuit with a MHz display that can slow down the CPU speed

It measures 127.3 × 54.1 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the MAX3232ID and ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cole8888/SRNE-Solar-Charge-Controller-Monitor repository on GitHub, at the commit this page was made from: the board is My-Current-Setup/PCB and Schematic/ESP32_SolarBox.kicad_pcb and its schematic My-Current-Setup/PCB and Schematic/ESP32_SolarBox.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cole8888 before reusing the design.