Skip to the content
2 layers48 × 48 mmSTM32 Drone Flight Controller, the printed circuit board in 3D

STM32 Drone Flight Controller

svndu-dex/STM32-Flight-Controller-PCB

Custom STM32F411-based flight controller PCB designed in KiCad with MPU6050 integration, UART communication, SWD debugging, and PWM motor outputs.

Size
48 × 48 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
59
Pads
103
Tracks, vias
122, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Jun 2026
Updated
22 Jun 2026

Overview

STM32 Drone Flight Controller is an open-source printed circuit board by svndu-dex, from the svndu-dex/STM32-Flight-Controller-PCB repository on GitHub. It is a 2-layer board of 48 × 48 mm with 15 parts on 59 nets, routed with 122 tracks and 0 vias.

It is built around the MPU-6050. Its parts include 4 capacitors, 3 connectors, 2 resistors and 2 ICs. It belongs with the robots and motor control and interfaces and adapters boards and the STM32 boards of this library.

Main components

1

README

README.md

STM32 Flight Controller PCB

Overview

A custom flight controller PCB designed using KiCad based on the STM32F411 microcontroller and MPU6050 IMU sensor.

Features

  • STM32F411CEU6 Microcontroller
  • MPU6050 IMU Sensor
  • I2C Communication Interface
  • UART Interface
  • SWD Programming Header
  • 4 PWM Outputs
  • Ground Plane Implementation
  • ERC and DRC Verified

Tools Used

  • KiCad
  • STM32 Platform

Design Images

PCB Layout

(Add PCB_Layout.png)

3D Render

(Add PCB_3D.png)

Future Improvements

  • Firmware Development
  • Sensor Data Acquisition
  • Motor Control Integration
  • Drone Stabilization Algorithms

Parts

15
QtyValueFootprintReferences
4100nFCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4
3Conn_01x04Connector:FanPinHeader_1x04_P2.54mm_VerticalJ1, J2, J3
24.7kResistor_SMD:R_0603_1608MetricR1, R2
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU2
1STM32F411CEUxPackage_QFP:LQFP-48_7x7mm_P0.5mmU1

The 11 most common of 15 parts.

Similar boards

  • 2 layers23 × 120 mmFeather multi oled, the printed circuit board in 3D

    Feather multi oled

    idlehandsdev/volumetric_display

    TENEX OLED Displays

    72 parts312CC-BY-SA-4.0
  • 4 layers95 × 50 mmControl board, the printed circuit board in 3D

    Control board

    ZhuYanzhen1/MM32_CLion

    本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法,并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.

    129 parts58AGPL-3.0
  • 2 layers50 × 66 mmBluePhil, the printed circuit board in 3D

    BluePhil

    pms67/BluePhil

    STM32-based development board with various sensors.

    106 parts53MIT
  • 2 layers36 × 43 mmAsac fc rev a, the printed circuit board in 3D

    Asac fc rev a

    victorhook/asac-fc

    asac fc is an rp2040 based flight controller made for FPV drone flying

    119 parts52GPL-3.0
  • 4 layers305 × 208.3 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    paradise-fi/RoFI

    Distributed Metamorphic Robots

    224 parts42
  • 2 layers98.5 × 17.8 mmWeeSpindel, the printed circuit board in 3D

    WeeSpindel

    c-/weeSpindel

    Smaller, simpler version of the iSpindel. NOTE: Work-in-progress

    22 parts17
  • 2 layers36.2 × 36.2 mmDrone PCB, the printed circuit board in 3D

    Drone PCB

    PlumPot55/PCB_Designs

    Source Files of our PCB we did as a community

    50 parts15
  • 2 layers26 × 21.3 mmPModBoard, the printed circuit board in 3D

    PModBoard

    pms67/PModlet

    PMOD PCB with USB-to-UART converter and IMU (MPU-6050, I2C) for FPGAs.

    19 parts15MIT

Questions

How big is the STM32 Drone Flight Controller PCB?

It measures 48 × 48 mm and has 2 copper layers, 1.6 mm thick.

What parts does the STM32 Drone Flight Controller use?

15 parts, built around the MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32 Drone Flight Controller KiCad files?

From the svndu-dex/STM32-Flight-Controller-PCB repository on GitHub, at the commit this page was made from: the board is Project Files/STM32_Drone_Flight_Controller.kicad_pcb and its schematic Project Files/STM32_Drone_Flight_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32 Drone Flight Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask svndu-dex before reusing the design.