Skip to the content
2 layers20.1 × 15.2 mmFtsh breakout, the printed circuit board in 3D

Ftsh breakout

ssfrr/ftsh_breakout

This is a breakout board to connect a J-Link LITE CortexM-9 to a breadboard.

Size
20.1 × 15.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
9
Pads
14
Tracks, vias
20, 0
Routed
Yes
KiCad
KiCad 4
Created
21 Jan 2015
Updated
9 Nov 2021

Overview

Ftsh breakout is an open-source printed circuit board by ssfrr, from the ssfrr/ftsh_breakout repository on GitHub. It is a 2-layer board of 20.1 × 15.2 mm with 2 parts on 9 nets, routed with 20 tracks and 0 vias.

It belongs with the interfaces and adapters boards of this library.

README

README.md

Programming an RFDuino with the breakout

ftsh_breakout

This is a breakout board to connect a J-Link LITE CortexM-9 to a breadboard.

Specifically it breaks out the SWDIO and SWCLK pins on the 9-pin Samtec FTSH-105-01-L-DV-K header to a 5-pin 0.100" header you can plug into a breadboard. The pins are ordered so you can place it right next to an RFDuino and program the Nordic chip directly, bypassing the Arduino environment.

WARNING: There's no going back once you've erased the RFDuino bootloader. From then on you will need to program it directly using the J-Link (or through your own bootloader if you write one.

I designed the board in KiCad, so you'll find here the project files, as well as the exported Gerbers and GCode files that you can use to mill the boards.

I make no guarantees as to the suitibility or quality of these files, and particularly you should check over the GCode files to make sure the settings are good for your particular milling machine.

From Gerber to PCB

Mostly this project was a chance to get a smooth workflow together for milling PCBs, so I want to document here what I did. This isn't a schematic capture or PCB layout tutorial, so I'll assume you have designed a board that you now want to mill. Any PCB layout software can export gerbers, so that will be our starting point.

Get pcb2gcode

There's a bug with the released version of pcb2gcode where multi-pass path generation seems to use too-small a bounding box, so the outside of traces near the edge don't get enough clearance. You can download my fork from Github until the fix gets merged into master.

Check the Makefile

This project has a makefile that will generate g-code using pcb2gcode. I encourage you to copy this Makefile, tweak the values, and incorporate it into your own project. The main values that should change project-to-project are all defined at the top of the Makefile. You should check the settings within the individual target rules to make sure they're OK for your machine.

The drill file handling is set up to mill out holes if they're larger than your milling head. We typically use a 1/32" milling head for cutting board outlines and holes, which is a fine diameter for a lot of through-hole components like resistors, but is too small for larger components like header pins. This setting makes it really easy to mill out larger holes automatically, using the diameters listed in your drill file.

Run make

This should get you front.ngc, outline.ngc, and drill.ngc, which you can feed into your CNC running software of choice.

Check the gcode

I use OpenSCAM, which is a great open-source gcode viewer that even simulates what the end product will look like after the milling is complete. The file ftsh_breakout_openscam.xml is a project file that includes our gcode files and tool sizes, so you see what the end product will look like.

The result gcode in OpenSCAM

Mill It!

Load each gcode file into Mach3, attach the correct milling head, and go to town.

NOTE: Make sure you start the spindle on your CNC before running the gcode for the drill file! It seems that the generated gcode doesn't have the M3 command that actually starts the spindle, so you run the risk of running a stationary bit into your PCB, which is basically guaranteed to break the bit.

Parts

2
QtyValueFootprintReferences
1CONN_01X05Pin_Headers:Pin_Header_Straight_1x05P1
1FTSH-JTAGFTSH:FTSH-JTAGJ1

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Ftsh breakout PCB?

It measures 20.1 × 15.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ftsh breakout use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ftsh breakout KiCad files?

From the ssfrr/ftsh_breakout repository on GitHub, at the commit this page was made from: the board is ftsh_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ftsh breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask ssfrr before reusing the design.