2 layers90 × 60 mm
Open-source KiCad boards
4,034 match “da-h”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers248.2 × 131 mm
- 4 layers161 × 100 mm
AD DA module
KLFAMO/relock_Artiq
This project is an electronic device based on the STM32 microcontroller, equipped with an Ethernet port for remote control and data communication.
416 parts - 2 layers57.8 × 39 mm
H BRIDGE
Ondrak-123/H-BRIDGE
Macondo link: https://macondo.hackclub.com/projects/6541 - The whole step by step explanation and design day by day is on Macondo, I did not want to just copy the whole journals here, here I only included the most…
26 parts - 2 layers109.8 × 74 mm
- 2 layers51 × 27 mm
- 2 layers64.8 × 90.2 mm
Base roulante - pont en H
ClubRobotInsat/cartes
Toutes les cartes ici sont les cartes en développement au club. Vous pouvez retrouver dans les release les cartes correspondant à chaque robot.
26 partsApache-2.0 - 2 layers50 × 48 mm
Line follower h bridge v2
juleswwebb/portfolio
A static engineering portfolio for https://juleswwebb.github.io/portfolio/.
28 parts - 2 layers106.9 × 68.7 mm
Daemonbite Controller Hub
Arrghus8/Daemonbite-Controller-Hub
ARDUINO PRO MICRO.STEP taken from https://grabcad.com/library/arduino-pro-micro-1.
12 parts13GPL-3.0 - 2 layers75.5 × 62.5 mm
- 2 layers86 × 33 mm
USB hub daughterboard
bluepylons/A-USB-Daughterboard
A USB-C daughterboard with a 4-port USB hub on it, based on the Microchip USB2514 IC
53 parts9 - 4 layers154.9 × 128.4 mm
Daisy hardware v1
rafkhan/lowstepper
Dual phase manipulation low frequency oscillator by Okay Synthesizer.
161 parts9 - 2 layers65 × 56 mm
Hifiberry dac adc stage
hifiberry/kicad_template_dac_adc_stage
Template for an I/O board to the DAC/ADC stage
9 parts4 - 2 layers36.8 × 20.1 mm
Parallel port headphone dac
roybaer/parallel_port_headphone_dac
This is a reasonably accurate replica of the early 1990s SoundJr device by SiliconSoft.
37 parts4 - 4 layers92 × 64 mm
Dalishen pi h7p20
vllogic/dalishen_pi_h7p20
# English # I. Introduction Hardware design format: KiCad 9.0.6 The CH32H417 serves as a USB 3.0 forwarder, with a unidirectional communication speed of up to 400MB/s, breaking the speed bottleneck of the 68013.
237 parts3GPL-3.0 - 2 layers22.4 × 18.5 mm
- 2 layers30 × 65 mm
Dakboard HDMI dimmer v1
DotaPie/Dakboard-HDMI-dimmer-HW
Custom Raspberry Pi HAT with a BH1750 light sensor and PIR motion sensor for automatic HDMI display dimming. KiCAD source and JLCPCB-ready gerbers. Fits any Raspberry Pi with a 40-pin header.
17 parts1EUPL-1.2 - 2 layers15.2 × 20.3 mm
M5stickc dallas hat pcb
pablobacho/m5stickc-dallas-hat
Adapter for DS18B20 temperature sensor and M5StickC
4 parts1MIT - 2 layers51.5 × 63 mm
Usb hub dac
Person20020/usb-hub-dac
A simple USB hub with 3 USB C outputs and a built in DAC for a 3.5mm audio output. It uses a SL2.1a USB hub controller and a PCM2902 DAC.
46 parts1GPL-3.0 - 4 layers90 × 100 mm
Harp.device.quad.dac
AllenNeuralDynamics/harp.device.quac
0364: This repository contains the hardware, firmware, and software related to the Harp quad DAC
291 partsMIT - 2 layers43.2 × 35.6 mm
- 2 layers109 × 64 mm
Hyundai Dash V1.1
eymenyg/sim_dash
Download hyundaidashv1bng .zip from the Releases page and copy it to:
29 parts - 2 layers44 × 55 mm
Daisy hc165
gcask/the-pit
Flexible gamepad system with an arduino-based SPI hc165 daisy-chain
12 partsMPL-2.0 - 2 layers
ICE40 HX8K B EVN DAC
hanhha/iCE40-HX8K-B-EVN_experiment
Collection of expansion PCB designs and documents that I created when playing with this board
30 partsCC0-1.0