

USB hub daughterboard
A USB-C daughterboard with a 4-port USB hub on it, based on the Microchip USB2514 IC
- Size
- 86 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 48
- Pads
- 195
- Tracks, vias
- 510, 49
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210126)
- Created
- 15 Feb 2021
- Updated
- 24 Apr 2023
Overview
USB hub daughterboard is an open-source printed circuit board by bluepylons, from the bluepylons/A-USB-Daughterboard repository on GitHub. It is a 2-layer board of 86 × 33 mm with 53 parts on 48 nets, routed with 510 tracks and 49 vias.
It is built around the USBLC6-2SC6, AP2112K-3.3 and SM04B-SRSS-TB(LF)(SN), with the ASMD1206-150 and SMF9.0CA among its other parts. Its parts include 17 capacitors, 7 resistors, 7 ICs, 5 connectors and 2 diodes. It belongs with the interfaces and adapters boards of this library.
Main components
5USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedSM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board ConnectorASMD1206-150
1206-40℃~+85℃ 1.5A 1.9mm 100A 130mΩ 1mm 25mΩ 3.6mm 300ms 3A 6V 800mW 1206 Resettable Fuses ROHSShenzhen JDT FuseResettable FusesSMF9.0CA
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdA work in progress.
This is a USB-C daughterboard for keyboards with a 4-port USB 2.0 hub on it (2 USB-A, 2 internal facing connectors on JST SR connectors), based around the Microchip USB2514 IC.
Many thanks to:
- The C3 Unified Daughterboard project, form which this daughterboard was based off of
- The Nanohub Project - the USB2514 schematic was partially referenced off of the 4-port USB 2.0 design
This is available open-source under the CERN OHL-W license and uses the Acheron library.
This project has not been tested yet.
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C7, C8, C10, C11, C12, C13 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C18, C19, C20, C21 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H9, H10 |
| 5 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380 | H6, H7, H8, H11, H12 |
| 5 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1, U4, U5, U6, U7 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C9 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | 56k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R7 |
| 2 | SM04B-SRSS-TB(LF)(SN) | AcheronConnectors:SM04B-SRSS-TB(LF)(SN) | J4, J5 |
| 2 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J2, J3 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D2 |
| 1 | 60R@100MHz | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ASMD1206-150 | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H4 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | H5 |
| 1 | SMF9.0CA | AcheronComponents:D_SOD-123_Bidirectional | D1 |
| 1 | TYPE-C-31-M12_13 | AcheronConnectors:TYPE-C-31-M-12 | J1 |
| 1 | USB2514B_Bi | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U3 |
Similar boards
- 2 layers323.9 × 145.3 mm

- 2 layers116 × 90.5 mm

- 2 layers22 × 16.5 mm

- 2 layers175.8 × 188 mm

- 2 layers111 × 64 mm

Thinkpad USB keyboard PCB
bluepylons/A-Thinkpad-USB-keyboard
This is a project attempting to make a USB keyboard/Trackpoint controller and enclosure for the non-chiclet Thinkpad keyboard (from the 10/20 generation, such as the T410, W520, etc.).
95 parts9 - 2 layers35 × 10 mm

Eclipse Voyager
MaiTheSan/EclipsePhrase160
Eclipse Phrase「160」1.0 Design with gummy o-ring mount
10 parts2 - 2 layers265.2 × 79 mm

- 2 layers18 × 16.5 mm

Questions
How big is the USB hub daughterboard PCB?
It measures 86 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB hub daughterboard use?
53 parts, built around the USBLC6-2SC6, AP2112K-3.3, SM04B-SRSS-TB(LF)(SN) and ASMD1206-150. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB hub daughterboard KiCad files?
From the bluepylons/A-USB-Daughterboard repository on GitHub, at the commit this page was made from: the board is KiCAD files/USB-hub-daughterboard.kicad_pcb and its schematic KiCAD files/USB-hub-daughterboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB hub daughterboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask bluepylons before reusing the design.