

Poto Rev2
PCB for keyboard
- Size
- 323.9 × 145.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 287
- Nets
- 154
- Pads
- 1,772
- Tracks, vias
- 1,610, 145
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Oct 2021
- Updated
- 11 Dec 2021
Overview
Poto Rev2 is an open-source printed circuit board by chiappe666, from the chiappe666/Poto-Rev2 repository on GitHub. It is a 2-layer board of 323.9 × 145.3 mm with 287 parts on 154 nets, routed with 1,610 tracks and 145 vias.
It is built around the ATMEGA32U4-MU, TPD4E05U06DQAR and ASMD1206-150, with the S8050, SM04B-SRSS-TB(LF)(SN) and SMF9.0CA among its other parts. Its parts include 103 diodes, 33 connectors, 8 capacitors, 7 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TPD4E05U06DQAR
USON-10-40℃~+125℃ 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.5V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD Protection DevicesASMD1206-150
1206-40℃~+85℃ 1.5A 1.9mm 100A 130mΩ 1mm 25mΩ 3.6mm 300ms 3A 6V 800mW 1206 Resettable Fuses ROHSShenzhen JDT FuseResettable FusesS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)SM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board ConnectorSMF9.0CA
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdPoto-Rev2
PCB for keyboard
Parts
287| Qty | Value | Footprint | References |
|---|---|---|---|
| 102 | D_Small | Diode_SMD:D_SOD-123 | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D100, D101, D102, D103 +86 |
| 102 | MX-NoLED | MX_Only:MXOnly-1U-Hotswap-Antishear | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX100, MX101, MX102 +86 |
| 21 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J11, J13, J14, J16, J17, J18, J19, J20, J21, J22, J23, J24, J25, J26, J27, J28 +5 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C7 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7 |
| 4 | Mount-M2 | random-keyboard-parts:Generic-Mounthole | MH1, MH2, MH3, MH4 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C6 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8, J10 |
| 2 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3, J7 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 16Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8 |
| 1 | 60R@100MHz | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | ASMD1206-150 | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | BuiltIn | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | LED |
| 1 | Conn_01x01 | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J12 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J9 |
| 1 | ENCODER | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | LOGO | Logo:poto | G*** |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | PWR | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | PWR |
| 1 | RESET | acheron_Hardware:K2-1187SQ-A4SW-06 | SW1 |
| 1 | RGB | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SM04B-SRSS-TB(LF)(SN) | random-keyboard-parts:JST-SR-4 | J2 |
| 1 | SMF9.0CA | acheron_Components:D_SOD-123_Bidirectional | D1 |
| 1 | TPD4E05U06DQAR | acheron_Components:USON-10_2.5x1.0mm_P0.5mm | U3 |
| 1 | TYPE-C-31-M12_13 | acheron_Connectors:TYPE-C-31-M-12 | J1 |
| 1 | USB | random-keyboard-parts:JST-SR-4 | J6 |
| 1 | Unified-Daughterboard-Logo | Unified-Daughterboard-Logo:Unified-Daughterboard-Logo.pretty | G1 |
| 1 | Unified-Daughterboard-Name | Unified-Daughterboard-Logo:Unified-Daughterboard-Name.pretty | G2 |
The 269 most common of 287 parts.
Similar boards
- 2 layers116 × 90.5 mm

- 2 layers22 × 16.5 mm

- 2 layers86 × 33 mm

USB hub daughterboard
bluepylons/A-USB-Daughterboard
A USB-C daughterboard with a 4-port USB hub on it, based on the Microchip USB2514 IC
53 parts9 - 2 layers35 × 10 mm

Eclipse Voyager
MaiTheSan/EclipsePhrase160
Eclipse Phrase「160」1.0 Design with gummy o-ring mount
10 parts2 - 2 layers18 × 16.5 mm

- 2 layers111 × 64 mm

Thinkpad USB keyboard PCB
bluepylons/A-Thinkpad-USB-keyboard
This is a project attempting to make a USB keyboard/Trackpoint controller and enclosure for the non-chiclet Thinkpad keyboard (from the 10/20 generation, such as the T410, W520, etc.).
95 parts9 - 2 layers265.2 × 79 mm

- 2 layers175.8 × 188 mm

Questions
How big is the Poto Rev2 PCB?
It measures 323.9 × 145.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Poto Rev2 use?
287 parts, built around the ATMEGA32U4-MU, TPD4E05U06DQAR, ASMD1206-150 and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Poto Rev2 KiCad files?
From the chiappe666/Poto-Rev2 repository on GitHub, at the commit this page was made from: the board is Poto-Rev2/Poto-Rev2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Poto Rev2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask chiappe666 before reusing the design.