4 layers28 × 42 mm
2 layers43.2 × 35.6 mm
Daplink hic lpc55x
everyday-dev/daplink-hic-lpc55x- Size
- 43.2 × 35.6 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 42
- Nets
- 85
- Pads
- 181
- Tracks, vias
- 283, 75
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Nov 2023
- Updated
- 7 Apr 2026
Overview
Daplink hic lpc55x is an open-source printed circuit board by everyday-dev, from the everyday-dev/daplink-hic-lpc55x repository on GitHub, published under the MIT licence. It is a 2-layer board of 43.2 × 35.6 mm with 42 parts on 85 nets, routed with 283 tracks and 75 vias.
It is built around the CC0402KRX7R7BB104, RC0402JR-0710KL and CC0402JRNPO9BN180, with the CC0603MRX5R5BB226, MLZ2012N4R7LT000 and ABM8-16.000MHZ-B2-T among its other parts. Its parts include 13 capacitors, 10 resistors, 2 connectors, 1 IC and 1 switch. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
6
CC0402KRX7R7BB104
0402100nF 16V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
RC0402JR-0710KL
UncategorisedUnknown makerCC0402JRNPO9BN180
040218pF 50V NP0 ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
CC0603MRX5R5BB226
060322uF 6.3V X5R ±20% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
MLZ2012N4R7LT000
0805130mA 180mΩ 4.7uH 600mA Multilayer inductor ±20% 0805 Inductors (SMD) ROHSTDKInductors (SMD)
ABM8-16.000MHZ-B2-T
SMD3225-4P-20℃~+70℃ 16MHz 18pF 70Ω ±20ppm ±50ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdDAPLink HIC LPC55x
Introduction
This board is an HIC carrier module intended to be used with the DAPLink HDK board for DAPLink firmware development.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11 |
| 8 | 0R | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 18p | Capacitor_SMD:C_0402_1005Metric | C13, C15 |
| 2 | Conn_01x12_Socket | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1, J2 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 4.7u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | ABM8-16.000MHZ-B2-T | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | G*** | kibuzzard-6548E80B | kibuzzard-6548E80B |
| 1 | G*** | kibuzzard-65679272 | kibuzzard-65679272 |
| 1 | G*** | kibuzzard-65679263 | kibuzzard-65679263 |
| 1 | G*** | kibuzzard-65679278 | kibuzzard-65679278 |
| 1 | G*** | kibuzzard-6554FF4C | kibuzzard-6554FF4C |
| 1 | G*** | kibuzzard-656792B8 | kibuzzard-656792B8 |
| 1 | G*** | kibuzzard-65679267 | kibuzzard-65679267 |
| 1 | G*** | kibuzzard-65679241 | kibuzzard-65679241 |
| 1 | G*** | kibuzzard-6567926A | kibuzzard-6567926A |
| 1 | G*** | kibuzzard-6548ED42 | kibuzzard-6548ED42 |
| 1 | G*** | kibuzzard-6567927C | kibuzzard-6567927C |
| 1 | G*** | kibuzzard-6567926F | kibuzzard-6567926F |
| 1 | LOGO | gld:everydaydev | G*** |
| 1 | LPC55x16JBD100 | daplink-hic-lpc55x:QFP-100_14x14_Pitch0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:Panasonic_EVQPUJ_EVQPUA | SW2 |
Similar boards
- 4 layers30 × 30 mm
ReCamera S101 v1.0
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
90 parts495Apache-2.0 - 4 layers80 × 80 mm
- 4 layers41.2 × 80 mm
- 2 layers12.6 × 12.5 mm
- 2 layers80 × 65 mm
PixAppleV1.0
mrkingseasheep/PixApple
PixApple is designed as a RP2040 breakout board. It features 8 general use GPIOs, 1 SPI interface, 1 I2C interface, 4 ADC channels, 4 PWM channels and a CAN bus.
85 parts1GPL-3.0 - 2 layers100.3 × 75.5 mm
- 2 layers79.6 × 48 mm
Questions
How big is the Daplink hic lpc55x PCB?
It measures 43.2 × 35.6 mm and has 2 copper layers, 1.58 mm thick.
What parts does the Daplink hic lpc55x use?
42 parts, built around the CC0402KRX7R7BB104, RC0402JR-0710KL, CC0402JRNPO9BN180 and CC0603MRX5R5BB226. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Daplink hic lpc55x KiCad files?
From the everyday-dev/daplink-hic-lpc55x repository on GitHub, at the commit this page was made from: the board is daplink-hic-lpc55x/daplink-hic-lpc55x.kicad_pcb and its schematic daplink-hic-lpc55x/daplink-hic-lpc55x.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Daplink hic lpc55x design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).