2 layers109 × 64 mm
Soul PS Dash V1.1
eymenyg/sim_dash
Download hyundaidashv1bng .zip from the Releases page and copy it to:
25 parts
2 layers109 × 64 mm
Hyundai Dash V1.1
eymenyg/sim_dashDownload hyundaidashv1bng .zip from the Releases page and copy it to:
- Size
- 109 × 64 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 68
- Pads
- 148
- Tracks, vias
- 274, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Feb 2026
- Updated
- 3 Jul 2026
Overview
Hyundai Dash V1.1 is an open-source printed circuit board by eymenyg, from the eymenyg/sim_dash repository on GitHub. It is a 2-layer board of 109 × 64 mm with 29 parts on 68 nets, routed with 274 tracks and 16 vias.
It is built around the ULN2803A, 74HC595 and BS250, with the IRF9540NS among its other parts. Its parts include 11 resistors, 9 connectors, 3 ICs, 3 transistors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
BS250
TO-92TO-92 MOSFETs ROHSQNHMOSFETs
IRF9540NS
TO-263MOSFETsMinos
README
README.mdHyundai Dash V1 — setup guide
Step 1 — Install the game mod
BeamNG.drive
Download hyundai_dash_v1_bng_<date>.zip from the Releases page and copy it to:
C:\Users\<username>\AppData\Local\BeamNG\BeamNG.drive\current\modsATS / ETS2
⚠️ Requires a one-time server install before anything will work.
- Install ETS2 Telemetry Server and run it.
- Under Network Interfaces, select Loopback Pseudo-Interface 1 — the server IP should be
127.0.0.1.
No mod ZIP needed for ATS/ETS2 — the launcher talks to the telemetry server directly.
Assetto Corsa
⚠️ Requires Content Manager and Custom Shaders Patch — the mod won't load without both.
- Install Content Manager and Custom Shaders Patch.
- Download
hyundai_dash_v1_ac_<date>.zipfrom the Releases page and install through Content Manager, or unzip directly to your Assetto Corsa folder. - In-game, open the apps panel and enable Hyundai Dash V1.
Step 2 — Find your Arduino's COM port
- Open Device Manager in Windows.
- Expand Ports (COM & LPT).
- Unplug and replug the Arduino — the port that disappears and reappears is yours (e.g.
COM3).
Step 3 — Run the launcher
- Download
hdv1_gui_<date>.exefrom the Releases page. - Select your game and COM port, then click Start.
Two optional settings:
- Scale RPM — some race cars rev well beyond 8,000 RPM, which is the cluster's maximum. Enable this to scale the RPM range down so the needle still gives useful feedback across the full rev range instead of pinning at the top.
- Show km/h as MPH — the clusters are calibrated in MPH and most top out at 160 MPH. ATS/ETS2 trucks output speed in km/h and rarely exceed 150 km/h, which leaves the bottom half of the speedometer unused. Enable this to treat the km/h value as MPH so the needle uses the full dial.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | BS250 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q3 |
| 2 | ULN2803A | Package_DIP:DIP-18_W7.62mm | U1, U2 |
| 1 | +12V-GND | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | 0.1 uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 100R | Resistor_SMD:R_2512_6332Metric | R6 |
| 1 | 10R | Resistor_SMD:R_2512_6332Metric | R11 |
| 1 | 150R | Resistor_SMD:R_2512_6332Metric | R5 |
| 1 | 220R | Resistor_SMD:R_2512_6332Metric | R4 |
| 1 | 22R | Resistor_SMD:R_2512_6332Metric | R10 |
| 1 | 33R | Resistor_SMD:R_2512_6332Metric | R9 |
| 1 | 47R | Resistor_SMD:R_2512_6332Metric | R8 |
| 1 | 68R | Resistor_SMD:R_2512_6332Metric | R7 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | B-CAN | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | B-CAN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | B-CAN SPI | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J8 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | C-CAN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | C-CAN | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | C-CAN SPI | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J5 |
| 1 | GND-Fuel | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | IGN-HS1-HS2-LS1-LS2 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | IRF9540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
More from eymenyg/sim_dash
1Similar boards
- 2 layers42 × 78 mm
P.003-V1.0.1
GSAS-LABS/P.003
Digital dice based on an ATtiny85 and 74HC595. Supports D4, D6, D8, and D10 modes, with configurable rolling animation, button-based type selection, EEPROM persistence, and low-power sleep mode for extended battery life.
21 partsCERN-OHL-S-2.0 - 2 layers199 × 57.5 mm
IROC U Charging
24bec124-sketch/IROC-U-Charging-PMOS
Developed for Team Arrow as part of IRoC-U (ISRO Robotics Challenge - URSC), a national student competition hosted by the Indian Space Research Organization (ISRO).
48 parts1 - 2 layers100 × 100 mm
V2.2 Mechanical Seven Segment Controller
OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters
53 parts65 - 2 layers28 × 36 mm
- 2 layers100 × 100 mm
- 2 layers110 × 31.5 mm
- 2 layers66.7 × 61.7 mm
Vday
niteshkadyan/Hearty-LED-Necklace-Badge
Kicad project files and Android app for the Hearty LED wearable necklace cum badge
179 parts10MIT - 2 layers100 × 100 mm
Flipdot brose
julianschick/flipdot-brose
Microcontroller code (ESP32) and Circuit Design for controlling Brose Flipdot Modules.
185 parts5MIT
Questions
How big is the Hyundai Dash V1.1 PCB?
It measures 109 × 64 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hyundai Dash V1.1 use?
29 parts, built around the ULN2803A, 74HC595, BS250 and IRF9540NS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hyundai Dash V1.1 KiCad files?
From the eymenyg/sim_dash repository on GitHub, at the commit this page was made from: the board is KiCad/9.0/projects/Hyundai_Dash_V1.1/Hyundai_Dash_V1.1.kicad_pcb and its schematic KiCad/9.0/projects/Hyundai_Dash_V1.1/Hyundai_Dash_V1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hyundai Dash V1.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask eymenyg before reusing the design.