Skip to the content
2 layers100 × 100 mmFlipdot brose, the printed circuit board in 3D

Microcontroller code (ESP32) and Circuit Design for controlling Brose Flipdot Modules.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
185
Nets
129
Pads
518
Tracks, vias
1,043, 71
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Dec 2019
Updated
16 Nov 2024

Overview

Flipdot brose is an open-source printed circuit board by julianschick, from the julianschick/flipdot-brose repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 185 parts on 129 nets, routed with 1,043 tracks and 71 vias.

It is built around the 74HC245D, 74HC595 and ULN2803A, with the TBD62783APG among its other parts. Its parts include 15 ICs, 11 resistors, 4 connectors, 3 capacitors and 3 fuses. It belongs with the lEDs and displays boards and the ESP32 boards of this library.

Main components

4

README

README.md

flipdot-brose

Leiterplattenlayout für die Ansteuerung von Brose-Flipdotmodulen.

Teileliste

Mit passenden Artikelbezeichnungen für den Berliner Elektroteilehändler Segor.

AnzahlBeschreibungSegor-Artikelbezeichnung
2Hohlsteckerbuchse für Printmontage 2,1/5,5mmDCBU 2,1-PRNB
3Miniatursicherungshalter Littelfuse RM 5,08mmRSI-Halter/LP
3Rundsicherungen träge (1A, 4A, 5A)RSI 1,0 A T; RSI 4,0 A T; RSI 5,0 A T
1JST VH-Buchse 3-polig 90°B3PS-VH
1Diode mind. 2A und 30V1N 5062
1Diode mind. 6A und 5VP 600 M
1Keramikkondensator 100n RM 2,5mmu10-R2.5-X7R
1Elektrolytkondensator 10u RM 2,5mmELRA 10u-50/105°/6,3x7
1Linearregler 3.3V min. 500mA Formfaktor TO220LD 1117 V33
6Shift-Register 8Bit 74HC59574HC 595 N
1Octal-Transceiver 76HC24574HC 245 N
4NPN-Darlington-Array 8 Bit ULN2803AULN 2803 A
2High-Side-Driver TD62783 (oder UDN2981)TD62783 APG
8Widerstand 10K RM 5,08mm
1ESP32-Development-Board NodeMCU/DEVKITV1 (15 Pole je Reihe und VCC- und GND-Pin nebeneinander)
1Wannenstecker 60-polig (2x30) RM 2,54mm mit (oder ohne) Niederhalter
1Pinheader 10-polig (2x5) RM 2,54mm (und passende Kurzschlussbrücken dazu)
2Pinheader 16-polig RM 2,54mm (eigentlich 15-polig)

Parts

185
QtyValueFootprintReferences
1010KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9, R10
674HC595Package_DIP:DIP-16_W7.62mmU6, U8, U9, U12, U14, U16
5JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1, JP2, JP3, JP4, JP5
4ULN2803APackage_DIP:DIP-18_W7.62mmU5, U7, U10, U11
2Conn_01x02TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01502HDWU_Pitch5.00mmJ3, J4
2TBD62783APackage_DIP:DIP-18_W7.62mmU13, U15
11000uCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC3
1100nCapacitors_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1
110uCapacitors_THT:CP_Radial_D5.0mm_P2.50mmC2
1330Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR11
174HC245Package_DIP:DIP-20_W7.62mmU4
1Conn_01x03Connectors_JST:JST_VH_B3PS-VH_2x3x3.96mm_HorizontalJ2
1Conn_02x30_Odd_EvenConnector_IDC:IDC-Header_2x30_P2.54mm_Vertical_LockJ1
1DDiode_THT:D_A-405_P7.62mm_HorizontalD1
1DDiode_THT:D_P600_R-6_P12.70mm_HorizontalD2
1ESP32_DEVCITV1JS_Local:ESP32_DEVKITV1U1
1Fuse 1AFuse_Holders_and_Fuses:Fuseholder_Fuse_TR5_Littlefuse-No560_No460F2
1Fuse 500mAFuse_Holders_and_Fuses:Fuseholder_Fuse_TR5_Littlefuse-No560_No460F1
1Fuse 5AFuse_Holders_and_Fuses:Fuseholder_Fuse_TR5_Littlefuse-No560_No460F3
1LD1117S33TR_SOT223TO_SOT_Packages_THT:TO-220-3_HorizontalU2

The 43 most common of 185 parts.

Similar boards

  • 4 layers535 × 308 mmBoatcontrol, the printed circuit board in 3D

    Boatcontrol

    Alli-Ekundayo/scpt-rl

    SCPT-RL trains a cross-attention transformer policy to place PCB components sequentially on a discrete grid. Training has two phases:

    683 partsMIT
  • 2 layers38.1 × 55.9 mmDisplay driver, the printed circuit board in 3D

    Display driver

    hmcty/microwave

    All software and hardware for running the microwave food simulator.

    15 parts
  • 4 layersMother, the printed circuit board in 3D

    Mother

    okemessi/midimalletg

    MIDI mallet controller for marimba/other keyboard percussion players

    90 partsGPL-2.0
  • 2 layers150 × 100 mmPistonEncoder, the printed circuit board in 3D

    PistonEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    32 partsCC-BY-SA-4.0
  • 2 layers99.1 × 99.1 mmFlipDotDriver, the printed circuit board in 3D

    FlipDotDriver

    bitluni/FlippyFlip

    49 parts14
  • 4 layers20.3 × 90 mmHp45, the printed circuit board in 3D

    Hp45

    BenChung/hp45-controller

    109 parts1
  • 2 layers96.5 × 96.5 mmMat1, the printed circuit board in 3D

    Mat1

    paliichukvladyslav/led-matrix-5x4

    A simple 5x4 LED matrix board based on ULN2003, TD62783A, 74HC595.

    36 parts1WTFPL
  • 2 layers223 × 45.3 mmDisplayboard, the printed circuit board in 3D

    Displayboard

    njKessel/ESP32s3-NetworkClock

    ESP32-S3 smart clock with LED display, weather, moon phase, temperature, Google Calendar

    60 parts1MIT

Questions

How big is the Flipdot brose PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Flipdot brose use?

185 parts, built around the 74HC245D, 74HC595, ULN2803A and TBD62783APG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flipdot brose KiCad files?

From the julianschick/flipdot-brose repository on GitHub, at the commit this page was made from: the board is pcb/flipdot-brose.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flipdot brose design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).