
Current3x3A Artiq
KLFAMO/current3x3A_Artiq
3 channel current driver (up to 3A each channel) compatible with Artiq

This project is an electronic device based on the STM32 microcontroller, equipped with an Ethernet port for remote control and data communication.
AD DA module is an open-source printed circuit board by KLFAMO, from the KLFAMO/relock_Artiq repository on GitHub. It is a 4-layer board of 161 × 100 mm with 416 parts on 324 nets, routed with 3,536 tracks and 354 vias.
It is built around the SN65MLVD040RGZT, OPA1612AID and ADA4945-1ACP, with the MCP3561-E/NC, LD29150DT50R and LM4040AIM3-5.0 among its other parts. Its parts include 182 capacitors, 103 resistors, 16 ICs, 9 connectors and 8 diodes.
This project is an electronic device based on the STM32 microcontroller, equipped with an Ethernet port for remote control and data communication. Designed for precise laser diode management, it offers a robust set of features for voltage measurement and control across two input and two output channels. This functionality enables it to monitor and adjust laser diode current and piezo voltage.
Voltage Measurement and Control
Remote Operation via Ethernet
The device can be controlled remotely over Ethernet, allowing users to access and manage laser parameters through a web interface. This setup facilitates seamless integration into laboratory environments, enabling convenient remote adjustments and monitoring.
Laser Relocking Algorithms
Algorithms for laser relocking will be implemented directly within the STM32 microcontroller using C programming, allowing the device to function autonomously. In the event of laser instability, the device can automatically detect issues and initiate a relock process to maintain optimal performance.
Wavemeter Integration
The Ethernet port will also facilitate communication with a wavemeter, enabling the device to maintain the laser at the desired experimental frequency. This feature is critical for applications requiring precise frequency stabilization and will allow the device to compensate for drift or fluctuations.
Autonomous Operation
By implementing the control and relocking algorithms directly on the microcontroller, this device will operate autonomously, reducing the need for external computing resources. The integration with analog inputs for voltage monitoring further enhances its capacity to react to experimental changes and ensure stable laser operation without external intervention.
Sinara and ARTIQ Compatibility
The device will be compatible with the Sinara system, and future integration with the ARTIQ control system is planned, making it highly suitable for advanced experimental setups and ensuring smooth operation within compatible environments.
This device is intended for applications requiring remote control of laser parameters, particularly in environments where stability and autonomy are crucial. For example:
This project is under development, with the hardware currently in production. The documentation here provides an outline of the devices intended functionality, and further details will be added as development progresses.
To start the board, you need to configure the TCP232 module as follows (for developers):
Initial Connection
When powered on for the first time, the TCP232 module operates at the default IP address 192.168.0.7 (subnet mask /24).
Set up your local network so you can communicate with this address.
Accessing the Configuration Interface
Connect to the module using a web browser by entering:
http://192.168.0.7
This will open the web interface, where you can change network settings, e.g., switch the module to DHCP.
Serial Port Settings
In the web interface, go to the Serial Port tab and set:
10TCP ServerAfter saving these settings, the module will be ready to work with the board in this project.
This work has received funding from the European Partnership on Metrology, co-financed by the European Union’s Horizon Europe Research and Innovation Programme and by the Participating States, under grant number 22IEM01 TOCK.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 69 | 100n 50V X7R | Capacitor_SMD:C_0603_1608Metric | C11, C12, C101, C102, C103, C104, C105, C106, C110, C111, C117, C119, C125, C134, C142, C143 +53 |
| 33 | GRM188R61E106KA73D | Capacitor_SMD:C_0603_1608Metric | C2, C10, C13, C14, C15, C16, C23, C121, C140, C145, C150, C155, C171, C174, C192, C195 +17 |
| 24 | 100p 50V C0G | Capacitor_SMD:C_0603_1608Metric | C116, C120, C126, C135, C141, C144, C151, C154, C157, C162, C165, C170, C173, C176, C178, C181 +8 |
| 16 | 100R 1% | Resistor_SMD:R_0603_1608Metric | R15, R25, R26, R27, R28, R29, R30, R31, R32, R35, R36, R37, R38, R39, R40, R50 |
| 13 | 10n 50V C0G | Capacitor_SMD:C_0603_1608Metric | C53, C55, C136, C137, C138, C146, C147, C148, C149, C161, C168, C182, C189 |
| 8 | 10 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R61, R71, R82, R86, R91, R99, R103, R108 |
| 8 | 475 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R84, R85, R88, R89, R101, R102, R105, R106 |
| 6 | GCM188R71E105KA64J | Capacitor_SMD:C_0603_1608Metric | C66, C68, C82, C83, C122, C124 |
| 6 | GRM21BR71A106KA73L | Capacitor_SMD:C_0805_2012Metric | C22, C30, C99, C100, C107, C108 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H3, H4, H5, H6, H7, H8 |
| 5 | 0 | Resistor_SMD:R_0603_1608Metric | JP1, JP2, R52, R90, R107 |
| 5 | 10k 1% | Resistor_SMD:R_0603_1608Metric | R1, R11, R12, R22, R41 |
| 5 | 1k 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R54, R58, R59, R68, R69 |
| 5 | 1k2 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R55, R62, R63, R72, R73 |
| 5 | RF2-49B-T-00-50-G-HDW | Connector_Coaxial:SMA_Amphenol_132203-12_Horizontal | SMA1, SMA2, SMA3, SMA4, SMA5 |
| 4 | 100 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R92, R93, R109, R110 |
| 4 | 1k 1% | Resistor_SMD:R_0603_1608Metric | R8, R16, R18, R19 |
| 4 | 1k1 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R83, R87, R100, R104 |
| 4 | 22n 25V C0G | Capacitor_SMD:C_0603_1608Metric | C166, C167, C187, C188 |
| 4 | BAS70JFILM | Diode_SMD:D_SOD-323F | D7, D8, D9, D10 |
| 4 | BAT54WS | Diode_SMD:D_SOD-323F | D3, D4, D5, D6 |
| 4 | GRM188R60J476ME15D | Capacitor_SMD:C_0603_1608Metric | C127, C129, C130, C133 |
| 4 | GRM31CR71A226KE15L | Capacitor_SMD:C_1206_3216Metric | C20, C21, C28, C29 |
| 4 | OPA1612 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U20, U21, U22, U23 |
| 3 | 1n 50V C0G | Capacitor_SMD:C_0603_1608Metric | C123, C128, C131 |
| 3 | 4u7 10V X5R | Capacitor_SMD:C_0603_1608Metric | C62, C81, C84 |
| 3 | 500 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R56, R60, R70 |
| 3 | DS1021-1*3SF11-B | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3, JP4, JP5 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2, FID3 |
| 3 | GCJ31BR73A102KXJ1L | Capacitor_SMD:C_1206_3216Metric | C74, C200, C201 |
| 3 | HV732BTTD1004F | Resistor_SMD:R_1206_3216Metric | R17, R120, R121 |
| 2 | 0.1 1% 250mW | Resistor_SMD:R_0805_2012Metric | R4, R6 |
| 2 | 100 0.5% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R81, R98 |
| 2 | 100 5% | Resistor_SMD:R_1206_3216Metric | R95, R112 |
| 2 | 100 5% | Resistor_SMD:R_0603_1608Metric | R94, R111 |
| 2 | 100k 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R80, R97 |
| 2 | 12k 1% | Resistor_SMD:R_0603_1608Metric | R5, R7 |
| 2 | 15k8 1% | Resistor_SMD:R_0603_1608Metric | R13, R23 |
| 2 | 15p 50V C0G | Capacitor_SMD:C_0603_1608Metric | C61, C115 |
| 2 | 200 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R51, R53 |
| 2 | 220 0.5% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R78, R79 |
| 2 | 220R 1% | Resistor_SMD:R_0603_1608Metric | R33, R34 |
| 2 | 220n 50V C0G | Capacitor_SMD:C_1206_3216Metric | C160, C177 |
| 2 | 293D107X9010C2TE3 | Capacitor_Tantalum_SMD:CP_EIA-7132-28_AVX-C | C85, C86 |
| 2 | 2k 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R66, R76 |
| 2 | 2k2 5% | Resistor_SMD:R_0603_1608Metric | R96, R113 |
| 2 | 2u2 10V X7R | Capacitor_SMD:C_0603_1608Metric | C70, C71 |
| 2 | 39 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R65, R75 |
| 2 | 3k83 1% | Resistor_SMD:R_0603_1608Metric | R14, R24 |
| 2 | 49.9 1% | Resistor_SMD:R_0603_1608Metric | R67, R77 |
| 2 | 510 1% | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 5k36 1% | Resistor_SMD:R_0603_1608Metric | R21, R42 |
| 2 | 82 1% | Resistor_SMD:R_0603_1608Metric | R45, R46 |
| 2 | 820 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R64, R74 |
| 2 | 82p 50V C0G | Capacitor_SMD:C_0603_1608Metric | C90, C91 |
| 2 | ADA4945-1 | Package_CSP:LFCSP-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U24, U26 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | T2, T3 |
| 2 | BLM18KG331SN1D | Inductor_SMD:L_0603_1608Metric | L1, L10 |
| 2 | CAT16-220J4LF | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2 |
| 2 | FTR-B3CA012Z | MY_Library:FTRB3CA012Z | REL1, REL2 |
| 2 | IHLP2525CZER220M11 | Inductor_SMD:L_Vishay_IHLP-2525 | L4, L7 |
| 2 | LD29150DT50R | Package_TO_SOT_SMD:TO-252-2 | U1, U3 |
| 2 | LM4040AIM3-5.0 | Package_TO_SOT_SMD:SOT-23 | U29, U30 |
| 2 | LOGO | ff_lib_8:kl_famo_logo_small | G3, G4 |
| 2 | LOGO | MY_Library:GUM_logo | G1, G2 |
| 2 | LQH44PH220MPRL | ff_lib_8:L_MURATA_LQH44 | L2, L5 |
| 2 | LT3093IDD | Package_DFN_QFN:DFN-12-1EP_2x3mm_P0.45mm_EP0.64x2.4mm | U8, U9 |
| 2 | MCP3561 | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U25, U27 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2 |
| 2 | SN65MLVD040RGZT | Package_DFN_QFN:VQFN-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm_ThermalVias | U14, U15 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | DAC3, DAC4 |
| 1 | +12V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P2 |
| 1 | +12VA | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P10 |
| 1 | +15V_CN | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P9 |
| 1 | +15V_CP | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P8 |
| 1 | +3V3A | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P4 |
| 1 | +3V3D | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P7 |
| 1 | +5VA | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P3 |
| 1 | +5VD | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P5 |
| 1 | +6V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P6 |
The 360 most common of 416 parts.

KLFAMO/current3x3A_Artiq
3 channel current driver (up to 3A each channel) compatible with Artiq

KLFAMO/phase_detector_Artiq
This is a phase detector designed to measure phase differences for input frequencies ranging from 0 to approximately 200 MHz. The device includes configurable frequency dividers for each input channel.


polykit/polykit-x-mainboard
Schematics and PCB layout for a mainboard for an 8 voice polyphonic synthesizer

OneAudio/OSVA
Open source versatible analyzer (24bits 1.536MSPS 2 Channels)

HACManchester/LaserCutter.PCB.Making
Docs for using the laser cutter to make PCBs


It measures 161 × 100 mm and has 4 copper layers, 1.59 mm thick.
416 parts, built around the SN65MLVD040RGZT, OPA1612AID, ADA4945-1ACP and MCP3561-E/NC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KLFAMO/relock_Artiq repository on GitHub, at the commit this page was made from: the board is kicad/AD DA module.kicad_pcb and its schematic kicad/AD DA module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KLFAMO before reusing the design.