Skip to the content
123

LD29150DT50R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 1.5A 13V 200uVrms 30mA 400mV@(1.5A) 5V 64dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD29150DT50R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252-2(DPAK)
Pins
3
In stock
831 at JLCPCB (C157411)
Used on
5 open-source boards

Overview

The LD29150DT50R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-252-2(DPAK) package with 3 pins. -40℃~+125℃@(Tj) 1 1.5A 13V 200uVrms 30mA 400mV@(1.5A) 5V 64dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:TO-252-2, from KiCad's library), ready for a KiCad board. 831 are in stock at JLCPCB (part C157411). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

IN1OUT3GND2
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUTFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:TO-252-2From KiCad's library

Pinout

3
The pins of the LD29150DT50R
PinNameType
1INPower in
2GNDPower in
3OUTPower out

Open-source boards using it

5
  • 4 layers161 × 100 mmCurrent3x3A Artiq, the printed circuit board in 3D

    Current3x3A Artiq

    KLFAMO/current3x3A_Artiq

    3 channel current driver (up to 3A each channel) compatible with Artiq

    365 parts
  • 4 layers161 × 100 mmCurrent100A Artiq, the printed circuit board in 3D

    Current100A Artiq

    KLFAMO/current100A_Artiq

    100A current driver compatible with Artiq

    337 parts
  • 4 layers161 × 100 mmAD DA module, the printed circuit board in 3D

    AD DA module

    KLFAMO/relock_Artiq

    This project is an electronic device based on the STM32 microcontroller, equipped with an Ethernet port for remote control and data communication.

    416 parts
  • 4 layers100 × 100 mmSpeeday, the printed circuit board in 3D

    Speeday

    Thrathra/Speeduino-Daytona

    281 parts
  • 2 layers173 × 114 mmMidi Merger, the printed circuit board in 3D

    Midi Merger

    mrwillem/PCBs

    174 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD29150DT50R?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT and the footprint Package_TO_SOT_SMD:TO-252-2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD29150DT50R?

TO-252-2(DPAK), with 3 pins. Its footprint is drawn on this page.

Where is the LD29150DT50R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD29150DT50R?

JLCPCB lists it as part C157411, with 831 in stock; the sellers' links on this page open their listings.

What can replace the LD29150DT50R?

Parts like it in the library: the CJ7805 3% by Jiangsu Changjing Electronics Technology (CJ), the LD1086DT50 by STMicroelectronics, the LM29150RS-5.0 by HTC Korea TAEJIN Tech and the L7805CDT(TOKMAS) by Tokmas. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD29150DT50R?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.