Skip to the content

Open-source KiCad boards

2,317 match “USB_5V”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers50 × 35 mmUSB C 5V Power Board, the printed circuit board in 3D

    USB C 5V Power Board

    syedalicodes/USB_C_5V_Power_Board

    A USB-C 5V power board with ESD protection, resettable fuse, reverse-polarity protection, and 3.3V regulation designed in KiCad 10.

    18 parts
  • 2 layers33.5 × 15.5 mmProject1 USB C 5v Power Suplly PCB, the printed circuit board in 3D

    Project1 USB C 5v Power Suplly PCB

    UshasriGudigandla/USB-C-5V-Power-Supply-PCB

    USB-C 5V power supply PCB designed and verified using KiCad, including protection, filtering and fabrication files.

    8 parts
  • 2 layers60 × 40 mmUsb c-5v sink, the printed circuit board in 3D

    Usb c-5v sink

    embedrapp/deepee

    Open benchmark for evaluating AI agents on embedded firmware, code repair, schematics, and PCB engineering

    6 parts2MIT
  • 2 layers36.8 × 30 mmUsb 5v power supply, the printed circuit board in 3D

    Usb 5v power supply

    baleshwarece-jpg/PCB_PROJECTS

    30-Days-PCB-Design-Challenge

    7 parts
  • 2 layers120 × 80 mmRx72t 100 pga usb, the printed circuit board in 3D

    Rx72t 100 pga usb

    hirakuni45/RX

    Renesas RX Microcontroller, C++ framework, Library, Sample

    113 parts86BSD-3-Clause
  • 2 layers29 × 27 mmUSB C-3-way splitter V5, the printed circuit board in 3D

    USB C-3-way splitter V5

    bluepylons/USB-C-3-way-splitter

    A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources

    39 parts40MIT
  • 6 layers34 × 30.2 mmUSB LiDAR VL53L9, the printed circuit board in 3D

    USB LiDAR VL53L9

    RemiFM/USB-LiDAR-VL53L9

    USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU

    72 parts24MIT
  • 2 layers26 × 30 mmUSB C to UART, the printed circuit board in 3D

    USB C to UART

    jyancat/UART-Expansion-Card

    Design files for the UART expansion card, please note this is a tested and working expansion card. Licensed under CERN-OHL-S-2.0. Uses the CH340C with switchable power and logic levels (5V and 3V3)

    16 parts23
  • 2 layers100 × 25 mmRechargeable 5V power bank REV 0.52, the printed circuit board in 3D

    Rechargeable 5V power bank REV 0.52

    shaharsery/5V-Power-Bank

    This is an open source hardware 5V rechargeable power bank, intended for use with 1 Li-ion / Li-Pol 3.7V rechargeable battery cell.

    69 parts9CC-BY-SA-4.0
  • 6 layers100 × 100 mmUsb power board, the printed circuit board in 3D

    Usb power board

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    409 parts5Apache-2.0
  • 4 layers26 × 10 mmPalm IIIc usb c sync, the printed circuit board in 3D

    Palm IIIc usb c sync

    TobleMiner/Palm-IIIc-usb-c-sync

    A USB-C sync adapter for the Palm IIIc

    30 parts5
  • 2 layers22 × 42 mmUSB-2242, the printed circuit board in 3D

    USB-2242

    Embedded-Shark-LLC/USB-2242

    Internal USB adapter for M.2 2242 slots

    20 parts4
  • 2 layers35.7 × 27.9 mmGR USB Serial, the printed circuit board in 3D

    GR USB Serial

    GadgetReboot/USB_Serial

    3.3v/5v CH340 USB to UART interface with all flow control and indicator signals broken out

    23 parts4
  • 4 layers91.4 × 40.6 mmMta1 usb dev, the printed circuit board in 3D

    Mta1 usb dev

    tillitis/tk1-pcba

    PCB files for the open and flexible security key - TKey

    92 parts4CERN-OHL-S-2.0
  • 4 layers70 × 50 mmSkibidi phone usb hub, the printed circuit board in 3D

    Skibidi phone usb hub

    tobycm/skibidi-phone-usb-hub

    a very skibidi usb hub for my google pixel 7. powered by the fe1.1s, providing 1 upstream usb c port, 2 downstream usb c ports, and 2 downstream usb a ports!!

    34 parts4MIT
  • 2 layers89.8 × 55.6 mmC64-Pi Pico USB Keyboard, the printed circuit board in 3D

    C64-Pi Pico USB Keyboard

    baldengineer/C64-Pi-Pico-USB-Keyboard-Adapter

    Adapter to use serial/usb/wireless keyboard to type on C64

    49 parts3
  • 2 layers127 × 90 mmRadio usb, the printed circuit board in 3D

    Radio usb

    SP8EBC/radio-usb-interface

    USB <--> Land Mobile Radio interace with full ground isolation on 2way audio and PTT control

    225 parts3
  • 2 layers90 × 50 mmUSB Hub V2.0, the printed circuit board in 3D

    USB Hub V2.0

    CarosCave/4_Port_2.0_USB-Hub

    You will find the: - CAD-Files in the folder KiCAD - The manufacturing files in the folder Gerber-files - The PDF documents in the folder PDF - The licence files from CERN OHL v. 1.2 under Licence

    62 parts2
  • 2 layersUSB C Socket HID, the printed circuit board in 3D

    USB C Socket HID

    mrred2k/Kicad_Design_Blocks

    USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.

    8 parts2
  • 2 layers40 × 25 mmUsb booster, the printed circuit board in 3D

    Usb booster

    bclswl0827/usb-booster

    Ultra-low-cost Type-C 5V to 12V boost converter

    24 parts1MIT

Parts matching “USB_5V”

See them in the parts library