Skip to the content
6 layers100 × 100 mmUsb power board, the printed circuit board in 3D

Usb power board

bluesatunsw/owr5

This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

Size
100 × 100 mm
Copper layers
6
Thickness
1.6 mm
Parts
409
Nets
415
Pads
1,766
Tracks, vias
4,521, 986
Pours
122
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Feb 2024
Updated
7 Nov 2026

Overview

Usb power board is an open-source printed circuit board by bluesatunsw, from the bluesatunsw/owr repository on GitHub, published under the Apache-2.0 licence. It is a 6-layer board of 100 × 100 mm with 409 parts on 415 nets, routed with 4,521 tracks and 986 vias.

It is built around the USB5744/2G, TPS565201DDC and USB7216C/KDX, with the RT9742GGJ5, BDFN3310A056R and LM5148 among its other parts. Its parts include 223 capacitors, 94 resistors, 50 ICs, 17 connectors and 10 diodes. It belongs with the STM32 boards of this library.

Main components

9

README

src/computing_power_hub_elec/README.md

Computing Power Hub (CPH)

A device which provides and monitors regulated rails for communications (passive 24V POE), computing (19V), cameras (12V) and lighting (5V) devices. It complies with the common device specification 2025-04.

Switching

Output to each rail can be switched.

Monitoring

The output current and voltage of each rail is monitored.

Rail Generation

The 19V, 12V and 5V rails are generated by TPS54560 buck regulators (designs documented with Excel spreadsheets from TI). Each of these rails should be able to deliver 5A. A TPS61175 regulator is used to generate the 24V 1A POE rail.

The high current 5V and 12V rails replace the regular rails in the common device specification.

Connection

Power input for the CPH is provided via a male XT30 connector. The 19V and 12V rails are output to 2-pin JST VH headers, limited to 5A and 4A respectively. LED power is sent to four ARGB (WS2812) ports with a 3-pin JST PA header, limited to 1A each.

The board has a pair of RJ45 sockets, the Ethernet signal is passed between these ports with a POE power injected into one of the ports.

Parts

409
QtyValueFootprintReferences
136220nCapacitor_SMD:C_0402_1005MetricC206, C220, C301, C306, C307, C308, C309, C310, C311, C312, C314, C315, C316, C317, C318, C319 +120
30100kResistor_SMD:R_0402_1005MetricR201, R202, R216, R217, R221, R308, R309, R310, R403, R404, R405, R406, R407, R408, R409, R410 +14
2222uCapacitor_SMD:C_1210_3225MetricC211, C221, C222, C224, C434, C435, C514, C515, C519, C520, C614, C615, C619, C620, C714, C715 +6
222u2Capacitor_SMD:C_0603_1608MetricC203, C205, C207, C219, C432, C433, C511, C512, C517, C518, C611, C612, C617, C618, C711, C712 +6
18RT9742GGJ5Package_TO_SOT_SMD:TSOT-23-5U402, U403, U502, U503, U508, U509, U602, U603, U608, U609, U702, U703, U708, U709, U802, U803 +2
16BDFN3310A056RBluesat:UDFN8_3P3X1_517CB_ONSU504, U505, U507, U510, U604, U605, U607, U610, U704, U705, U707, U710, U804, U805, U807, U810
1168uCapacitor_SMD:CP_Elec_6.3x7.7C208, C217, C225, C516, C532, C616, C632, C716, C732, C816, C832
1010RResistor_SMD:R_0402_1005MetricR419, R423, R502, R503, R602, R603, R702, R703, R802, R803
104u7Capacitor_SMD:C_0805_2012MetricC401, C402, C521, C522, C621, C622, C721, C722, C821, C822
910kResistor_SMD:R_0402_1005MetricR205, R207, R209, R214, R414, R504, R604, R704, R804
9USB3_A_StackedConnector_USB:USB3_A_Molex_48406-0001_Horizontal_StackedJ401, J501, J503, J601, J603, J701, J703, J801, J803
81kResistor_SMD:R_0402_1005MetricR211, R301, R304, R306, R506, R606, R706, R806
6100nCapacitor_SMD:C_0402_1005MetricC204, C209, C212, C214, C216, C223
62k2Resistor_SMD:R_0402_1005MetricR223, R427, R501, R601, R701, R801
64u7Capacitor_SMD:C_1206_3216MetricC202, C213, C513, C613, C713, C813
6WS2812B-2020LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD301, D302, D303, D304, D305, D306
510KResistor_SMD:R_0402_1005MetricR302, R303, R424, R425, R426
4220kResistor_SMD:R_0402_1005MetricR206, R415, R416, R417
4330Resistor_SMD:R_0402_1005MetricR507, R607, R707, R807
4IRFH7440TRPBFBluesat:PQFN_5x6mm_E_DGSQ1, Q2, Q3, Q4
4MountingHoleBluesat:M2.5H101, H102, H103, H104
4TPS1H200APackage_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mmU506, U606, U706, U806
4USB5744Bluesat:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mmU501, U601, U701, U801
4VH2Connector_JST:JST_VH_B2P-VH-B_1x02_P3.96mm_VerticalJ502, J602, J702, J802
310nCapacitor_SMD:C_0402_1005MetricC101, C210, C304
322kResistor_SMD:R_0402_1005MetricR213, R220, R222
333kResistor_SMD:R_0402_1005MetricR204, R208, R219
347kResistor_SMD:R_0402_1005MetricR210, R402, R413
36k8Resistor_SMD:R_0402_1005MetricR203, R215, R218
210pCapacitor_SMD:C_0402_1005MetricC302, C303
21uInductor_SMD:L_Changjiang_FXL0630L203, L205
22u2Capacitor_SMD:C_1206_3216MetricC201, C218
22u2Inductor_SMD:L_Changjiang_FXL0630L202, L204
23V3Package_DFN_QFN:Diodes_UDFN-10_1.0x2.5mm_P0.5mmD308, D401
24u7Capacitor_SMD:C_0402_1005MetricC305, C313
25mResistor_SMD:R_1206_3216MetricR212, R224
2LM5148Bluesat:RGY0024E-MFGU202, U204
2TPS565201Package_TO_SOT_SMD:TSOT-23-6U201, U203
110uCapacitor_SMD:C_1210_3225MetricC215
11RResistor_SMD:R_0402_1005MetricR101
122RResistor_SMD:R_0402_1005MetricR305
124MhzCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY301
130VDiode_SMD:D_SMFD201
1470RResistor_SMD:R_0402_1005MetricR307
15VPackage_TO_SOT_SMD:SOT-523D307
1600RResistor_SMD:R_0402_1005MetricL201
168kResistor_SMD:R_0402_1005MetricR401
1IDC6Bluesat:IDC6J302
1LOGOProject:EvanCatGirlEvanLF
1SM02B-PASSBluesat:SM02B-PASSJ301
1STM32G474Bluesat:LQFP-64-0.5U301
1TCAN1462VPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU303
1USB7216CBluesat:VQFN-100-1EP_12x12mm_P0.4mm_EP8x8mmU401
1USB_C_ReceptacleBluesat:USB_C_Receptacle_24PJ101
1XT30MConnector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_HorizontalJ201
1ZD24C128APackage_SO:TSSOP-8_4.4x3mm_P0.65mmU302

More from bluesatunsw/owr

12
  • 6 layers62 × 55.5 mmStepper driver, the printed circuit board in 3D

    Stepper driver

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    204 parts5Apache-2.0
  • 6 layers70 × 45 mmComputing power hub, the printed circuit board in 3D

    Computing power hub

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    184 parts5Apache-2.0
  • 6 layers65.8 × 56.3 mmSystem power hub, the printed circuit board in 3D

    System power hub

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    180 parts5Apache-2.0
  • 6 layers80 × 95 mmVesc, the printed circuit board in 3D

    Vesc

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    153 parts5Apache-2.0
  • 6 layers64 × 64 mmMain power hub, the printed circuit board in 3D

    Main power hub

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    135 parts5Apache-2.0
  • 6 layers37 × 62 mmVesc2, the printed circuit board in 3D

    Vesc2

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    123 parts5Apache-2.0
  • 2 layers100 × 68 mmLed beacon, the printed circuit board in 3D

    Led beacon

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    105 parts5Apache-2.0
  • 2 layers40.6 × 17.2 mmCan converter, the printed circuit board in 3D

    Can converter

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    28 parts5Apache-2.0
  • 2 layers45 × 36 mmConnector board, the printed circuit board in 3D

    Connector board

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    18 parts5Apache-2.0
  • 2 layers23.6 × 14 mmDebug adapter, the printed circuit board in 3D

    Debug adapter

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    9 parts5Apache-2.0
  • 2 layers20 × 16 mmKinect adaptor, the printed circuit board in 3D

    Kinect adaptor

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    7 parts5Apache-2.0
  • 2 layers15 × 10 mmCan terminator, the printed circuit board in 3D

    Can terminator

    bluesatunsw/owr

    This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

    6 parts5Apache-2.0

Similar boards

  • 4 layers78.5 × 59 mmSyncro mainboard, the printed circuit board in 3D

    Syncro mainboard

    deadbandlabs/syncro-mainboard

    Hardware Design for Syncro FFB Interceptor

    158 partsCERN-OHL-W-2.0
  • 6 layers98 × 97 mmOvc5, the printed circuit board in 3D

    Ovc5

    osrf/ovc

    the Open Vision Computer

    202 parts207Apache-2.0
  • 4 layers100 × 100 mmSTM32 ESC HW, the printed circuit board in 3D

    STM32 ESC HW

    cej830/STM32_BLDC_ESC_Firmware

    STM32_BLDC_ESC_Firmware

    162 parts
  • 2 layers89.8 × 41.5 mmBat rf, the printed circuit board in 3D

    Bat rf

    dwanpo/balancer

    105 parts1
  • 2 layers90 × 118 mmRoverbase, the printed circuit board in 3D

    Roverbase

    stephendade/roverbase

    A PCB design for Power and Motor control for small robots

    61 parts3GPL-3.0
  • 4 layers150 × 112 mmBoard v3-83pct, the printed circuit board in 3D

    Board v3-83pct

    dmz006/brain-drain

    Standalone four-bay (plus M.2) NIST 800-88 disk sanitizer: Raspberry Pi CM5 carrier board, Python service, 3D-printed enclosure

    302 parts2
  • 6 layers85 × 55 mmMini server, the printed circuit board in 3D

    Mini server

    Keyaan-07/Zenith

    A battery powered single board computer capable of running linux

    159 partsMIT
  • 6 layersFcBoard, the printed circuit board in 3D

    FcBoard

    raonslab2/fcBoardKicad

    ACU5EV (Zynq UltraScale+ XCZU5EV) SoM용 캐리어 보드 KiCad 프로젝트

    45 parts

Questions

How big is the Usb power board PCB?

It measures 100 × 100 mm and has 6 copper layers, 1.6 mm thick.

What parts does the Usb power board use?

409 parts, built around the USB5744/2G, TPS565201DDC, USB7216C/KDX and RT9742GGJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usb power board KiCad files?

From the bluesatunsw/owr repository on GitHub, at the commit this page was made from: the board is src/usb_power_board_elec/usb_power_board.kicad_pcb and its schematic src/VH4_extender_elec/VH4_extender.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usb power board design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).