Skip to the content
12345

RT9742GGJ5

Richtek TechExtended

-40℃~+85℃ 1 1A 2.7V~6V 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection TSOT-23-5 Power Distribution Switches ROHS

Part id
richtek-tech/RT9742GGJ5
Category
Power Distribution Switches
Package
TSOT-23-5
Pins
5
In stock
9,820 at JLCPCB (C250547)
Used on
58 open-source boards

Overview

The RT9742GGJ5 is a power Distribution Switche made by Richtek Tech in a TSOT-23-5 package with 5 pins. -40℃~+85℃ 1 1A 2.7V~6V 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection TSOT-23-5 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (tinkerforge:RT9742, from Tinkerforge) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 9,820 are in stock at JLCPCB (part C250547). 58 open-source boards in 52 repositories on GitHub use it.

Symbol

1OUT2GND3nFLG5IN4EN
tinkerforge:RT9742From Tinkerforge

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

From the datasheet

11
Supply, least
2.7 V · VIN, recommended operating min · p. 5
Supply, most
6 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
7 V · VIN, absolute max · p. 5
Works from
-40 °C · Ambient temperature, operating min · p. 5
Works up to
85 °C · Ambient temperature, operating max · p. 5
Junction, hottest
150 °C · Junction temperature, absolute max · p. 5
Takes working
30 µA · VIN, typical quiescent current, switch on, VOUT open · p. 5
Takes asleep
100 nA · VIN, typical shutdown current, no load · p. 5
Current limit
1.1 A · Typical current limit, RT9742G, VOUT = 1V · p. 6
Junction to air (TSOT-23-5)
203 K/W · Junction to ambient, TA = 25°C, four-layer JEDEC 51-7 board · p. 5
Junction, hottest
125 °C · maximum junction temperature, recommended operating · p. 14

What it is and has

10
Protection
Reverse blocking current · p. 1
Protection
Under voltage lockout · p. 1
Fault reporting
Deglitched FLG output · p. 1
Protection
Thermal protection with fold-back · p. 1
Protection
Over current protection · p. 1
Protection
Short circuit protection · p. 1
Approval
UL Approved−E219878 · p. 1
Approval
Nemko Approved-NO87949 · p. 1
Switch
N-MOSFET high-side power switch for USB applications · p. 1
Fault reporting
Deglitched fault report (FLG) · p. 1

Around it

5
cap 10µF
between VIN and GND; CIN in the typical application circuit. · p. 7
cap 0.1µF
between VOUT and GND; COUT in the typical application circuit. · p. 7
cap 10μF
between VIN and GND; Low-ESR ceramic, located at the device; strongly recommended to prevent input voltage droop during hot-plug events. · p. 13
cap 120μF to 330μF
between VOUT and GND; Recommended output capacitance for USB applications; at least 120uF per downstream facing port. · p. 13
cap 0.01μF to 0.1μF
between VOUT and GND; Ceramic output bypass capacitor for general applications; improves immunity to short-circuit transients. · p. 13

Specifications

34
ParameterConditionsAs printedPage
Supply Input Voltage VINmax 7 V5
EN Voltagemin -0.3 · max 7 V5
FLAG Voltagemax 7 V5
Power Dissipation PDTSOT-23-5, TA = 25°Cmax 0.49 W5
Package Thermal Resistance θJATSOT-23-5; TA = 25°C, high effective thermal conductivity four-layer test board per JEDEC 51-7max 203 °C/W5
Junction Temperaturemax 150 °C5
Lead TemperatureSoldering, 10 sec.max 260 °C5
Storage Temperature Rangemin -65 · max 150 °C5
ESD SusceptibilityHBM (Human Body Model)max 2 kV5
Supply Input Voltage VINmin 2.7 · max 6 V5
EN Voltagemin 0 · max 6 V5
Junction Temperature Rangemin -40 · max 125 °C5
Ambient Temperature Rangemin -40 · max 85 °C5
Input Quiescent Current IQVIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°C; Switch on, VOUT = opentyp 30 · max 40 A5
Input Shutdown Current ISHDNVIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°C; no load on OUT, device OFF, VEN = 0V or VEN = 5Vtyp 0.1 · max 1 A5
Switch On Resistance RDS(ON)RT9742XXJ5/V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 70 m5
Over Current Trip Threshold ITRIPRT9742G/H/L; VIN = 5V, 100A/s; CIN = 10uF, COUT = 0.1uF, TA = 25°C; Note 5min 1.05 · typ 1.4 · max 1.5 A5
Current Limit ILIMRT9742G/H/L; VOUT = 1V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin 1 · typ 1.1 · max 1.2 A6
EN/EN Threshold Logic_High Voltage VIHVIN = 2.7V to 6V; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin 1.5 V6
EN/EN Threshold Logic_Low Voltage VILVIN = 2.7V to 6V; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmax 0.75 V6
EN/EN Input Current IEN/ENVEN = 0V, VEN = 5V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin -0.5 · max 0.5 A6
Output Leakage Current ILEAKAGEVEN = 0V, RLOAD = 0; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 0.5 · max 1 A6
Reverse Leakage Current IREVVOUT = 5V, VIN = 0V; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmax 1 A6
Reverse Voltage Trip Point VREVVOUT  VIN; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 200 mV6
Output Turn-On Rise Time tON_RISE10% to 90% of VOUT rising; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 1.5 ms6
Turn-On Time tONFrom enable to 90% of VOUT; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 2.1 ms6
FLG Output Resistance RFLGISINK = 1mA; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 10 6
FLG Off Current IFLG_OFFVFLG = 5V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 0.01 · max 1 A6
FLG Delay Time tDFrom fault condition to FLG assertion; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 10 ms6
Shutdown Auto-Discharge Resistance RDischargeVEN = 0V, VEN = 5V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 100 6
Under-Voltage Lockout VUVLOVIN rising; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmax 2.4 V6
Under-Voltage Hysteresis VUVLOVIN decreasing; CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 0.1 V6
Thermal Shutdown Protection TSDNote 6: Guarantee by design; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 140 °C6
Thermal Shutdown Hysteresis TSDNote 6: Guarantee by design; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 20 °C6

Open-source boards using it

58See all 58
  • 4 layers55 × 14.7 mmMinCab, the printed circuit board in 3D

    MinCab

    merocle/mincab

    small carrier board for Raspberry Pi CM4

    41 parts180CC-BY-SA-4.0
  • 2 layers55 × 40 mmUcm4, the printed circuit board in 3D

    Ucm4

    v3l0c1r4pt0r/ucm4

    Raspberry Pi Compute Module 4 micro carrier board

    41 parts42CC-BY-4.0
  • 6 layers76 × 56 mmCM4 MANET, the printed circuit board in 3D

    CM4 MANET

    ties1887/Mesh-radio-Halow-LoRa

    Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.

    122 parts40
  • 6 layers55 × 40 mmCm5 camera, the printed circuit board in 3D

    Cm5 camera

    CopperPilot/copper-pilot-cli

    CopperPilot in your terminal: a thin, open-source client for CopperPilot electronics design agent, the best AI for PCB Design.

    90 parts36MIT
  • 6 layers100 × 120 mmAstra piNas, the printed circuit board in 3D

    Astra piNas

    jlcjak/astra_piNas

    Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.

    176 parts30
  • 6 layers69.6 × 46.1 mmCarrier, the printed circuit board in 3D

    Carrier

    KaiPereira/CM5-SODIMM-Carrier

    A fully open source CM5 carrier to turn your Pi into a Jetson in compact SO-DIMM format!

    98 parts29
  • 6 layers80.9 × 63 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    neatstranger/Pi-In-The-Skyy

    PoE Camera, Based on Raspberry Pi CM4

    69 parts24
  • 6 layers125 × 125 mmLibreboard broken, the printed circuit board in 3D

    Libreboard broken

    256foundation/libreboard

    Open Source Bitcoin Mining Control Board

    193 parts21CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the RT9742GGJ5?

Yes. The symbol is tinkerforge:RT9742 and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RT9742GGJ5?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the RT9742GGJ5 datasheet?

Richtek Tech publishes it: the Datasheet link on this page opens it.

Where can I order the RT9742GGJ5?

JLCPCB lists it as part C250547, with 9,820 in stock; the sellers' links on this page open their listings.

What can replace the RT9742GGJ5?

Parts like it in the library: the SY6280AAC by 矽力杰silergy, the AP2171WG by Diodes Incorporated, the TPS2051BDBV by Texas Instruments and the RT9742CGJ5 by RICHTEK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RT9742GGJ5?

58 boards in 52 repositories on GitHub; the most starred are listed on this page, with their KiCad files.