Skip to the content
12345

AP2171WG

Diodes IncorporatedExtended

-40℃~+85℃ 1 1A 2.7V~5.5V 95mΩ Active High High Side Switch Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-25-5 Power Distribution Switches ROHS

Part id
diodes/AP2171WG
Category
Power Distribution Switches
Package
SOT-25-5
Pins
5
In stock
94,776 at JLCPCB (C110466)
Used on
27 open-source boards

Overview

The AP2171WG is a power Distribution Switche made by Diodes Incorporated in a SOT-25-5 package with 5 pins. -40℃~+85℃ 1 1A 2.7V~5.5V 95mΩ Active High High Side Switch Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-25-5 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Power_Management:AP2171W, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 94,776 are in stock at JLCPCB (part C110466). 27 open-source boards in 21 repositories on GitHub use it.

Symbol

1OUT2GND3FLG4EN5IN
Power_Management:AP2171WFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

12
Supply, least
2.7 V · IN, recommended operating min · p. 3
Supply, most
5.5 V · IN, recommended operating max · p. 3
Supply, absolute maximum
6.5 V · IN, absolute max · p. 3
Works from
-40 °C · Operating ambient min · p. 3
Works up to
85 °C · Operating ambient max · p. 3
Junction, hottest
150 °C · Junction temperature absolute max · p. 3
Takes working
45 µA · Input quiescent current typical, enabled, IOUT = 0, VIN = 5 V · p. 4
Takes asleep
500 nA · Input shutdown current typical, disabled, IOUT = 0 · p. 4
Gives
1 A · Continuous output current max, single channel · p. 3
Current limit
1.5 A · Over-load current limit typical, VIN = 5 V, VOUT = 4.6 V · p. 4
Junction to air (SOT25)
157 K/W · Junction-to-ambient typical, FR-4, 2oz copper, minimum recommended pad layout · p. 4
Edge
50 µs · Output turn-off fall time typical, CL = 1 uF, RLOAD = 10 Ω · p. 4

What it is and has

8
Channels
Single USB port power switch · p. 1
Protection
Overcurrent and thermal protection · p. 1
Reverse current blocking
Supported · p. 1
Enable
Active high (AP2171) · p. 1
Fault report
FLG with 7ms typical blanking time · p. 1
UL recognition
File Number E322375 · p. 1
Certification
IEC60950-1 CB Scheme · p. 1
RoHS
Totally lead-free and fully RoHS compliant · p. 1

Around it

4
cap 0.01-μF to 0.1-μF
between IN and GND; X7R or X5R ceramic bypass capacitor, close to the device. · p. 10
cap 10-μF minimum
between IN and GND; High-value electrolytic input capacitor recommended when the output load is heavy. · p. 10
cap 0.01-μF to 0.1-μF
between OUT and GND; Ceramic bypass capacitor improves immunity to short-circuit transients. · p. 10
cap 120-μF minimum
between OUT and GND; Electrolytic capacitor recommended when OUT is shorted to GND below -30°C; choose suitable voltage and temperature characteristics. · p. 10

Specifications

33
ParameterConditionsAs printedPage
Human Body Model ESD Protection ESD HBMTA = +25°Cmax 4 kV3
Machine Model ESD Protection ESD MMSOT25; TA = +25°Cmax 400 V3
Input Voltage VINTA = +25°Cmax 6.5 V3
Enable Voltage VEN , VFLGTA = +25°Cmax 6.5 V3
Maximum Junction Temperature TJ(MAX)max 150 °C3
Storage Temperature Range (Note 4) TSTmin -65 · max 150 °C3
Input Voltage VINTA = +25°Cmin 2.7 · max 5.5 V3
Output Current IOUTTA = +25°Cmin 0 · max 1 A3
Operating Ambient Temperature TAmin -40 · max 85 °C3
High-Level Input Voltage on EN or EN VIHAP2171 EN; maximum VIN; TA = +25°Cmin 2 V3
Low-Level Input Voltage on EN or EN VILAP2171 EN; TA = +25°Cmin 0 · max 0.8 V3
Input UVLO VUVLORLOAD = 1kΩ; TA = +25°C, VIN = +5Vmin 1.6 · typ 1.9 · max 2.5 V4
Input Shutdown Current ISHDNDisabled, IOUT = 0; TA = +25°C, VIN = +5Vtyp 0.5 · max 1 uA4
Input Quiescent Current IQEnabled, IOUT = 0; TA = +25°C, VIN = +5Vtyp 45 · max 70 uA4
Input Leakage Current ILEAKDisabled, OUT grounded; TA = +25°C, VIN = +5Vmax 1 uA4
Reverse Leakage Current IREVDisabled, VIN = 0V, VOUT = 5V, IREV at VIN; TA = +25°Ctyp 1 uA4
Switch on-resistance RDS(ON)SOT25; VIN = 5V, IOUT = 1A, TA = +25°Ctyp 95 · max 115 mΩ4
Switch on-resistance RDS(ON)SOT25; VIN = 5V, IOUT = 1A, -40°C ≤ TA ≤ +85°Cmax 140 mΩ4
Switch on-resistance RDS(ON)SOT25; VIN = 3.3V, IOUT = 1A, TA = +25°Ctyp 120 · max 140 mΩ4
Switch on-resistance RDS(ON)SOT25; VIN = 3.3V, IOUT = 1A, -40°C ≤ TA ≤ +85°Cmax 170 mΩ4
Short-Circuit Current Limit ISHORTEnabled into short circuit, CL = 68uF; TA = +25°C, VIN = +5Vtyp 1.2 A4
Over-Load Current Limit ILIMITVIN = 5V, VOUT = 4.6V, CL = 68uF, -40°C ≤ TA ≤ +85°Cmin 1.1 · typ 1.5 · max 1.9 A4
Current limiting trigger threshold ITrigOutput Current Slew rate (<100A/s) , CL=68uF; TA = +25°C, VIN = +5Vtyp 2 A4
EN Input leakage ISINKVEN = 5V; TA = +25°C, VIN = +5Vmax 1 uA4
Output turn-on delay time tD(ON)CL = 1uF, RLOAD = 10Ω; TA = +25°C, VIN = +5Vtyp 0.05 ms4
Output turn-on rise time tRCL = 1uF, RLOAD = 10Ω; TA = +25°C, VIN = +5Vtyp 0.6 · max 1.5 ms4
Output turn-off delay time tD(OFF)CL = 1uF, RLOAD = 10Ω; TA = +25°C, VIN = +5Vtyp 0.01 ms4
Output turn-off fall time tFCL = 1uF, RLOAD = 10Ω; TA = +25°C, VIN = +5Vtyp 0.05 · max 0.1 ms4
FLG output FET on-resistance RFLGIFLG = 10mA; TA = +25°C, VIN = +5Vtyp 20 · max 40 Ω4
FLG blanking time tBlankCIN = 10uF, CL = 68uF; TA = +25°C, VIN = +5Vmin 4 · typ 7 · max 15 ms4
Thermal Shutdown Threshold TSHDNEnabled, RLOAD = 1kΩ; VIN = +5Vtyp 140 C4
Thermal Shutdown Hysteresis THYS-typ 25 C4
Thermal Resistance Junction-to-Ambient θJASOT25 (Note 7): Device mounted on FR-4, 2oz copper, with minimum recommended pad layouttyp 157 °C/W4

Pins, by the datasheet

5
1 OUT
Voltage output pin; all OUT pins must be tied together externally. · p. 2
2 GND
Ground. · p. 2
3 FLG
Overcurrent and over-temperature fault report; open-drain flag is active low when triggered. · p. 2
4 EN
Active-high enable input for AP2171. · p. 2
5 IN
Voltage input pin; all IN pins must be tied together externally. · p. 2

Open-source boards using it

27See all 27
  • 2 layers36 × 58 mmUps adaptor, the printed circuit board in 3D

    Ups adaptor

    aronreid/ups-to-esp32

    Put a USB-only UPS on the network: an ESP32-S3 board and firmware that serves NUT on TCP 3493, with a web UI. No host computer, no Raspberry Pi.

    38 parts130GPL-3.0
  • 4 layers71.5 × 71.5 mmElixir, the printed circuit board in 3D

    Elixir

    golioth/elixir-hw

    An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!

    249 parts36CERN-OHL-P-2.0
  • 2 layers75 × 55 mmWellfed bench, the printed circuit board in 3D

    Wellfed bench

    Isaac-Duarte/wellfed

    Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.

    93 parts8MIT
  • 4 layers50 × 70 mmRp569, the printed circuit board in 3D

    Rp569

    kelu124/rp569

    RP569 - PIOs to usb3 ( rp2350 x ch569 )

    146 parts3
  • 2 layers127 × 90 mmRadio usb, the printed circuit board in 3D

    Radio usb

    SP8EBC/radio-usb-interface

    USB <--> Land Mobile Radio interace with full ground isolation on 2way audio and PTT control

    225 parts3
  • 8 layers45.2 × 29.7 mmOrbitESC, the printed circuit board in 3D

    OrbitESC

    brandonbraun653/OrbitESC

    An attempt at creating my own ESC module

    161 parts2MIT
  • 4 layers101.6 × 101.6 mmAvionus Flight Controller, the printed circuit board in 3D

    Avionus Flight Controller

    leptun/Avionus_Flight_Controller

    Controller board for autonomous RC plane

    287 parts1GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP2171WG?

Yes. The symbol is Power_Management:AP2171W and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP2171WG?

SOT-25-5, with 5 pins. Its footprint is drawn on this page.

Where is the AP2171WG datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP2171WG?

JLCPCB lists it as part C110466, with 94,776 in stock; the sellers' links on this page open their listings.

What can replace the AP2171WG?

Parts like it in the library: the SY6280AAC by 矽力杰silergy, the TPS2051BDBV by Texas Instruments, the RT9742CGJ5 by RICHTEK and the AP22814AW5 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP2171WG?

27 boards in 21 repositories on GitHub; the most starred are listed on this page, with their KiCad files.