Skip to the content
12345

RT9742CGJ5

RICHTEKExtended

-40℃~+85℃ 1 2.7V~6V 2A 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection TSOT-23-5 Power Distribution Switches ROHS

Part id
richtek-tech/RT9742CGJ5
Category
Power Distribution Switches
Package
TSOT-23-5
Pins
5
In stock
55,518 at JLCPCB (C250546)
Used on
6 open-source boards

Overview

The RT9742CGJ5 is a power Distribution Switche made by RICHTEK in a TSOT-23-5 package with 5 pins. -40℃~+85℃ 1 2.7V~6V 2A 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection TSOT-23-5 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (tinkerforge:RT9742, from Tinkerforge) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 55,518 are in stock at JLCPCB (part C250546). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1OUT2GND3nFLG5IN4EN
tinkerforge:RT9742From Tinkerforge

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

From the datasheet

10
Supply, least
2.7 V · VIN, recommended operating min · p. 5
Supply, most
6 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
7 V · VIN, absolute max · p. 5
Works from
-40 °C · Ambient temperature min · p. 5
Works up to
85 °C · Ambient temperature max · p. 5
Junction, hottest
150 °C · Junction temperature absolute max · p. 5
Takes working
30 µA · Input quiescent current typical, switch on, output open · p. 5
Takes asleep
100 nA · Input shutdown current typical, VIN = 5V, no load · p. 5
Current limit
2.2 A · Current limit typical, RT9742C, VOUT = 1V · p. 6
Junction to air (TSOT-23-5)
203 K/W · Junction to ambient, four-layer test board · p. 5

What it is and has

8
Protection
Reverse current blocking · p. 1
Protection
Under-voltage lockout · p. 1
Fault reporting
Deglitched FLG output · p. 1
Protection
Thermal protection with fold-back · p. 1
Protection
Over-current protection · p. 1
Protection
Short-circuit protection · p. 1
Approval
UL E219878 · p. 1
Approval
Nemko NO87949 · p. 1

Around it

2
cap 10µF
between VIN and GND; CIN in the typical application circuit · p. 7
cap 0.1µF
between VOUT and GND; COUT in the typical application circuit · p. 7

Specifications

34
ParameterConditionsAs printedPage
Supply Input Voltage VINmax 7 V5
EN Voltagemin -0.3 · max 7 V5
FLAG Voltagemax 7 V5
Power Dissipation PDTSOT-23-5, TA = 25°Cmax 0.49 W5
Package Thermal Resistance θJATSOT-23-5; TA = 25°C, high effective thermal conductivity four-layer test board per JEDEC 51-7max 203 °C/W5
Junction Temperaturemax 150 °C5
Lead TemperatureSoldering, 10 sec.max 260 °C5
Storage Temperature Rangemin -65 · max 150 °C5
ESD SusceptibilityHBM (Human Body Model)max 2 kV5
Supply Input Voltage VINmin 2.7 · max 6 V5
EN Voltagemin 0 · max 6 V5
Junction Temperature Rangemin -40 · max 125 °C5
Ambient Temperature Rangemin -40 · max 85 °C5
Input Quiescent Current IQVIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°C; Switch on, VOUT = opentyp 30 · max 40 A5
Input Shutdown Current ISHDNVIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°C; no load on OUT, device OFF, VEN = 0V or VEN = 5Vtyp 0.1 · max 1 A5
Switch On Resistance RDS(ON)RT9742XXJ5/V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 70 m5
Over Current Trip Threshold ITRIPRT9742C/D/J; VIN = 5V, 100A/s; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin 2.05 · typ 2.8 · max 3 A5
Current Limit ILIMRT9742C/D; VOUT = 1V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin 2 · typ 2.2 · max 2.4 A6
EN/EN Threshold Logic_High Voltage VIHVIN = 2.7V to 6V; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin 1.5 V6
EN/EN Threshold Logic_Low Voltage VILVIN = 2.7V to 6V; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmax 0.75 V6
EN/EN Input Current IEN/ENVEN = 0V, VEN = 5V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin -0.5 · max 0.5 A6
Output Leakage Current ILEAKAGEVEN = 0V, RLOAD = 0; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 0.5 · max 1 A6
Reverse Leakage Current IREVVOUT = 5V, VIN = 0V; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmax 1 A6
Reverse Voltage Trip Point VREVVOUT  VIN; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 200 mV6
Output Turn-On Rise Time tON_RISE10% to 90% of VOUT rising; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 1.5 ms6
Turn-On Time tONFrom enable to 90% of VOUT; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 2.1 ms6
FLG Output Resistance RFLGISINK = 1mA; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 10 6
FLG Off Current IFLG_OFFVFLG = 5V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 0.01 · max 1 A6
FLG Delay Time tDFrom fault condition to FLG assertion; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 10 ms6
Shutdown Auto-Discharge Resistance RDischargeVEN = 0V, VEN = 5V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 100 6
Under-Voltage Lockout VUVLOVIN rising; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmax 2.4 V6
Under-Voltage Hysteresis VUVLOVIN decreasing; CIN = 10uF, COUT = 0.1uF, TA = 25°Ctyp 0.1 V6
Thermal Shutdown Protection TSDNote 6: Guarantee by designtyp 140 °C6
Thermal Shutdown Hysteresis TSDNote 6: Guarantee by designtyp 20 °C6

Open-source boards using it

6
  • 4 layers98 × 75 mmPiFinder4, the printed circuit board in 3D

    PiFinder4

    brickbots/PiFinder

    A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera

    157 parts257GPL-3.0
  • 4 layers99.8 × 119.8 mmLC RFE RevA2, the printed circuit board in 3D

    LC RFE RevA2

    myriadrf/lc-rfe

    LibreCellular RF Front-End Hardware Design

    262 parts7
  • 2 layers18 × 46 mmPt1-RevA2, the printed circuit board in 3D

    Pt1-RevA2

    electrolama/pt1

    pt1 brings several common hardware-debugging functions together on a compact USB-connected board. It provides extra USB ports, a serial interface, and software-switchable power for working with target devices.

    37 parts5
  • 8 layers55 × 40 mmCm5-nano compatible, the printed circuit board in 3D

    Cm5-nano compatible

    david0ha/astra-cm5-nano

    KiCad files and specifications for a 55 × 40 mm CM5 carrier board.

    74 parts
  • 2 layers82 × 60 mmEEE3088F Design project, the printed circuit board in 3D

    EEE3088F Design project

    Phila-H-23/kicad-project

    This repository contains the KiCad design files, documentation, and resources for the power subsystem of a Micromouse robot developed as part of the EEE3088F course at the University of Cape Town.

    111 parts
  • 4 layers99.8 × 119.8 mmLC RFE RevA1, the printed circuit board in 3D

    LC RFE RevA1

    myriadrf/lc-rfe

    LibreCellular RF Front-End Hardware Design

    231 parts7

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the RT9742CGJ5?

Yes. The symbol is tinkerforge:RT9742 and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RT9742CGJ5?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the RT9742CGJ5 datasheet?

RICHTEK publishes it: the Datasheet link on this page opens it.

Where can I order the RT9742CGJ5?

JLCPCB lists it as part C250546, with 55,518 in stock; the sellers' links on this page open their listings.

What can replace the RT9742CGJ5?

Parts like it in the library: the SY6280AAC by 矽力杰silergy, the AP2171WG by Diodes Incorporated, the TPS2051BDBV by Texas Instruments and the AP22814AW5 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RT9742CGJ5?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.