Skip to the content
2 layers90 × 50 mmUSB Hub V2.0, the printed circuit board in 3D

You will find the: - CAD-Files in the folder KiCAD - The manufacturing files in the folder Gerber-files - The PDF documents in the folder PDF - The licence files from CERN OHL v. 1.2 under Licence

Size
90 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
62
Nets
62
Pads
190
Tracks, vias
509, 21
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20170922)
Created
23 Oct 2017
Updated
11 Nov 2017

Overview

USB Hub V2.0 is an open-source printed circuit board by CarosCave, from the CarosCave/4_Port_2.0_USB-Hub repository on GitHub. It is a 2-layer board of 90 × 50 mm with 62 parts on 62 nets, routed with 509 tracks and 21 vias.

It is built around the NTR2101P. Its parts include 13 capacitors, 10 resistors, 9 connectors, 6 ICs and 5 diodes. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

4_Port_2.0_USB-Hub

I made a 4 port 2.0 USB-Hub with an exar XR22404 Chip. I wanted to test the schematic for the USB-Chip to use it in a further project. Version 1 is up and running here. But the costs for one complete equipped PCB is about 60€. Now in V2.0 I decreased the costs to 28€ for the parts.

You will find the:

  • CAD-Files in the folder KiCAD
  • The manufacturing files in the folder Gerber-files
  • The PDF documents in the folder PDF
  • The licence files from CERN OHL v. 1.2 under Licence

Or you order the complete Project by my friends from Aisler B.V.. The will deliver the complete project incl. all parts (excl. the USB-Chip from Exar). You'll find the project under the following link: https://aisler.net/DK1CMB/4-port-2-0-usb-hub/main-pcb

The USB-Chip is an Exar XR22404CG28TR-F.

Licence:

Copyright Caroline Brix 2017.
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2. You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

Parts

62
QtyValueFootprintReferences
8680nFResistors_SMD:R_0805_HandSolderingC6, C7, C8, C9, C10, C11, C12, C13
5EMI_Common_Mode_Line_Filteruser_USB:WE-CNSWFL1, FL2, FL3, FL4, FL5
5LEDuser_SMD:LED_0805_HandSolderingD1, D2, D3, D4, D5
5WE-TVS_Diodeuser_housing:SOT23-6LU1, U2, U3, U4, U5
4600R@100MHzResistors_SMD:R_0805_HandSolderingL1, L2, L3, L4
4Conn_01x01Mounting_Holes:MountingHole_3.2mm_M3_PadJ2, J3, J4, J5
4USB_A_shieldeduser_USB:USB_A_shielded_WEJ6, J7, J8, J9
3100nFResistors_SMD:R_0805_HandSolderingC1, C3, C5
310kResistors_SMD:R_0805_HandSolderingR5, R8, R9
32k7Resistors_SMD:R_0805_HandSolderingR1, R2, R10
24,7µFResistors_SMD:R_0805_HandSolderingC2, C4
10Resistors_SMD:R_0805_HandSolderingR6
1100kResistors_SMD:R_0805_HandSolderingR7
112MHzCrystals:Crystal_SMD_3225-4pin_3.2x2.5mm_HandSolderingY1
13v3Connectors_TestPoints:Test_Point_Pad_d3.0mmTP4
140k2Resistors_SMD:R_0805_HandSolderingR4
1470Resistors_SMD:R_0805_HandSolderingR3
15VConnectors_TestPoints:Test_Point_Pad_d3.0mmTP1
1GNDConnectors_TestPoints:Test_Point_Pad_d3.0mmTP3
1NTR2101PTO_SOT_Packages_SMD:SOT-23Q1
1Name_1user_text:Name_LangTxt1
1OSHWSymbols:OSHW-Logo2_7.3x6mm_SilkScreenTxt2
1OVCConnectors_TestPoints:Test_Point_Pad_d3.0mmTP2
1PolyfuseResistors_SMD:R_1206_HandSolderingF1
1ResetConnectors_TestPoints:Test_Point_Pad_d3.0mmTP5
1USB_B_WEuser_USB:USB_B_THT_WEJ1
1XR22404user_USB:XR22404IC1

Similar boards

  • 2 layers82.2 × 101.3 mmMeshinger, the printed circuit board in 3D

    Meshinger

    Meshinger/Meshinger

    KiCad Project for the Meshinger hardware

    42 parts13
  • 2 layersFrozen stuff, the printed circuit board in 3D

    Frozen stuff

    mfkiwl/frozen_stuff

    hardware pcb based on frozen castle toy

    82 parts
  • 2 layers165 × 70 mmEv charger met16, the printed circuit board in 3D

    Ev charger met16

    ms270169/kicad

    1) Voltage transformer module does not work Wrong operation amplifier on module (OP07C instead of LM358) PCB error on R3 (see netlist-reverse-engieneered.jpg)

    70 partsMIT
  • 2 layers65 × 65.1 mmBase heating, the printed circuit board in 3D

    Base heating

    NerdyProjects/HouseBusNode

    (Yet another) house bus hardware based on STM32F072 and the CAN bus

    90 parts8
  • 2 layers139.3 × 113.8 mmFlake L, the printed circuit board in 3D

    Flake L

    lever-tech/flake

    An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]

    62 parts531CERN-OHL-W-2.0
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    62 parts517GPL-2.0

Questions

How big is the USB Hub V2.0 PCB?

It measures 90 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB Hub V2.0 use?

62 parts, built around the NTR2101P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB Hub V2.0 KiCad files?

From the CarosCave/4_Port_2.0_USB-Hub repository on GitHub, at the commit this page was made from: the board is KiCad/USB-Hub V2.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB Hub V2.0 design in my own project?

Its repository states no licence, so its author keeps all rights: ask CarosCave before reusing the design.