
Mosfet Pair 24VfromMCU
mrred2k/Kicad_Design_Blocks
USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.

USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.
USB C Socket HID is an open-source printed circuit board by mrred2k, from the mrred2k/Kicad_Design_Blocks repository on GitHub. It is a 2-layer board with 8 parts on 10 nets, routed with 69 tracks and 10 vias.
Its parts include 5 resistors, 2 diodes and 1 connector.
USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-. No 1.5k data pull-up: full-speed devices with an internal pull-up (CH340, RP2040, STM32) connect directly. Socket and ESD are LCSC Extended (no Basic alternative exists in the JLC catalogue); the CC resistors are Basic. Layout included. Superseded by USB-C_Socket_FullSpeed_SRV05, which uses an SRV05-4 array instead of the zeners (roughly 300x lower line capacitance, nanosecond clamping, also protects CC1/CC2); kept as the simpler variant when a zener is acceptable.
Manufacturer, MPN and JLCPCB class fetched automatically from the JLCPCB parts API.
| Refs | Value | Footprint | LCSC | JLCPCB | Manufacturer | MPN | Category |
|---|---|---|---|---|---|---|---|
| D7, D8 | 3.6V | D_SOD-123 | C22395524 | Extended | hongjiacheng | MM1W3V6 | Zener Diodes |
| J2 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | C165948 | Extended | Korean Hroparts Elec | TYPE-C-31-M-12 | USB Connectors |
| R11, R13 | 5.1k | R_0603_1608Metric | C23186 | Basic | UNI-ROYAL(Uniroyal Elec) | 0603WAF5101T5E | Chip Resistor - Surface Mount |
Keywords: usb usb-c type-c connector full-speed sink cc-resistor esd
| Maturity | Layout |
| LCSC Parts | Yes |
| JLCPCB | Optimized for Basic Parts |
| 3D Models | Partial |
| Reviewed | No |

mrred2k/Kicad_Design_Blocks
USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.

mrred2k/Kicad_Design_Blocks
USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.

mrred2k/Kicad_Design_Blocks
USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.

mrred2k/Kicad_Design_Blocks
USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.

mrred2k/Kicad_Design_Blocks
USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.

mrred2k/Kicad_Design_Blocks
USB 2.0 Type-C receptacle for full-speed devices (HRO TYPE-C-31-M-12), 5.1k pulldowns on CC1/CC2 for 5V sink, 3.6V zener clamps on D+/D-.


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mrred2k/Kicad_Design_Blocks repository on GitHub, at the commit this page was made from: the board is blocks.kicad_blocks/USB-C_Socket_HID.kicad_block/USB-C_Socket_HID.kicad_pcb and its schematic blocks.kicad_blocks/I2C_Pullups.kicad_block/I2C_Pullups.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mrred2k before reusing the design.