Skip to the content
2 layers26 × 30 mmUSB C to UART, the printed circuit board in 3D

Design files for the UART expansion card, please note this is a tested and working expansion card. Licensed under CERN-OHL-S-2.0. Uses the CH340C with switchable power and logic levels (5V and 3V3)

Size
26 × 30 mm
Copper layers
2
Thickness
0.8 mm
Parts
16
Nets
21
Pads
70
Tracks, vias
82, 36
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
4 May 2022
Updated
14 Aug 2024

Overview

USB C to UART is an open-source printed circuit board by jyancat, from the jyancat/UART-Expansion-Card repository on GitHub. It is a 2-layer board of 26 × 30 mm with 16 parts on 21 nets, routed with 82 tracks and 36 vias.

It is built around the CH340C and AP2112K-3.3. Its parts include 4 capacitors, 2 ICs, 2 connectors and 1 resistor. It belongs with the interfaces and adapters boards of this library.

Main components

2

Parts

16
QtyValueFootprintReferences
4TestPointTestPoint:TestPoint_Pad_1.5x1.5mmTP1, TP2, TP3, TP4
21uFCapacitor_SMD:C_0402_1005MetricC3, C4
2MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2
10.1uFCapacitor_SMD:C_0402_1005MetricC1
1105444-0001Expansion_Card:USB_C_Plug_Molex_105444P1
110nFCapacitor_SMD:C_0402_1005MetricC2
15.1kResistor_SMD:R_0402_1005MetricR1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U2
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU1
1Conn_01x06_FemaleConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_HorizontalJ1
1Jumper_3_OpenConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJP1

Similar boards

  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    187 parts157GPL-3.0
  • 2 layers87.5 × 77.5 mmPanel, the printed circuit board in 3D

    Panel

    jpconstantineau/NRF52-Board

    This Repository is a collection of NRF5x boards.

    143 parts100BSD-3-Clause
  • 4 layers20.3 × 40 mmTemp sensor, the printed circuit board in 3D

    Temp sensor

    matthewlai/WiredHut

    Home automation

    21 parts20GPL-3.0
  • 4 layers121.9 × 115.8 mmSparkFun GNSS UM980 panelized, the printed circuit board in 3D

    SparkFun GNSS UM980 panelized

    sparkfun/SparkFun_UM980_Triband_GNSS_RTK_Breakout

    Documentation and hardware repository for the SparkFun Triband GNSS RTK Breakout, featuring the UM980 high precision GNSS/RTK module from Unicore Communications

    584 parts11
  • 2 layers65 × 100 mmSyringe pump, the printed circuit board in 3D

    Syringe pump

    wenzel-lab/syringe-pumps-and-controller

    Design of 3d printable syringe pumps and dual controller.

    141 parts11
  • 2 layers52.9 × 22.9 mmMSP430G2553-Feather, the printed circuit board in 3D

    MSP430G2553-Feather

    upsidedownlabs/MSP430G2553-Feather

    MSP430G2553 based Adafruit feather compatible board 🪶

    76 parts10
  • 2 layers30 × 60 mmSmartishMiniLED, the printed circuit board in 3D

    SmartishMiniLED

    jeremypoulter/SmartishMiniLED

    USB C powered mini WLED controller

    41 parts2BSD-3-Clause
  • 2 layers26 × 29 mmEC Debug, the printed circuit board in 3D

    EC Debug

    jyancat/EC-Debug

    19 parts2CERN-OHL-S-2.0

Questions

How big is the USB C to UART PCB?

It measures 26 × 30 mm and has 2 copper layers, 0.8 mm thick.

What parts does the USB C to UART use?

16 parts, built around the CH340C and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB C to UART KiCad files?

From the jyancat/UART-Expansion-Card repository on GitHub, at the commit this page was made from: the board is Hardware/USB-C to UART.kicad_pcb and its schematic Hardware/USB-C to UART.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB C to UART design in my own project?

Its repository states no licence, so its author keeps all rights: ask jyancat before reusing the design.