2 layers170 × 91 mm
Panel
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
126 parts100BSD-3-Clause
2 layers87.5 × 77.5 mm
This Repository is a collection of NRF5x boards.
- Size
- 87.5 × 77.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 143
- Nets
- 50
- Pads
- 607
- Tracks, vias
- 2,022, 165
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Mar 2018
- Updated
- 27 Mar 2024
Overview
Panel is an open-source printed circuit board by jpconstantineau, from the jpconstantineau/NRF52-Board repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 87.5 × 77.5 mm with 143 parts on 50 nets, routed with 2,022 tracks and 165 vias.
It is built around the CH340C, E73-2G4M04S1B and AP2112K-3.3, with the TP4056, DMG3415U and MBR120 among its other parts. Its parts include 36 capacitors, 30 resistors, 18 diodes, 15 ICs and 9 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
E73-2G4M04S1B
SMD,28.7x17.5mm-40℃~+85℃ -95dBm 1.8V~3.6V 100m 14mA 4dBm 5mA Bluetooth 5.0、Bluetooth 4.2 GPIO、PWM、SPI、ADC、I2C、DMA On-board PCB Antenna、IPEX interface nRF52832 Chip SMD,28.7x17.5mm Bluetooth Modules ROHSChengdu Ebyte Elec TechBluetooth Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
DMG3415U
SOT-23MOSFETsTECH PUBLIC
MBR120
SOD-123Schottky DiodesDoeshare
README
README.mdNRF52-Board
This Repository is a collection of NRF5x boards.
TODO: remap folders...
| Hardware Name | PCB Folder name | Processor | Firmware | Circuit Diagram | Build Guide |
|---|---|---|---|---|---|
| LiPo Charger 3.3V Regulator | Batt_Charger_Regulator | n/a | n/a | Build Guide | |
| CR2032 Coin Cell Holder | Battery | n/a | n/a | Build Guide | |
| Mini Switch | MiniSwitch | n/a | n/a | Build Guide | |
| BlueMicro V1.x | EByte_E73 | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro V2.0b | EByte_E73_Batt | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro V2.0c | EByte_E73_Batt_ErgoTravel | NRF52832 | BlueMicro_BLE | Build Guide | |
| 4X4 backpack | EByte_E73_Batt_Macro_4x4 | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro Tester | EByte_E73_tester | NRF52832 | Arduino | ||
| BlueMicro51 | YJ-14015 | NRF51822 | tbd |
Parts
143| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10uF | Resistor_SMD:R_0805_2012Metric | C3, C3, C3, C5, C5, C5, C7, C7, C7, C8, C8, C8 |
| 9 | 100nF | Resistor_SMD:R_0805_2012Metric | C10, C10, C10, C11, C11, C11, C12, C12, C12 |
| 9 | 1k | Resistor_SMD:R_0805_2012Metric | R8, R8, R8, R9, R9, R9, R10, R10, R10 |
| 6 | 0.1uF | Resistor_SMD:R_0805_2012Metric | C2, C2, C2, C9, C9, C9 |
| 6 | D | Diode_SMD:D_SOD-123 | D2, D2, D2, D3, D3, D3 |
| 6 | RED | LED_SMD:LED_0805_2012Metric | D5, D5, D5, D6, D6, D6 |
| 4 | Val** | kbd:HOLE_JLCPCBA | Ref**, Ref**, Ref**, Ref** |
| 3 | 100 pF | Resistor_SMD:R_0805_2012Metric | C4, C4, C4 |
| 3 | 100K | Resistor_SMD:R_0805_2012Metric | R2, R2, R2 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R3, R3, R3 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R1, R1 |
| 3 | 10uH | Inductor_SMD:L_0805_2012Metric | L1, L1, L1 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R6, R6, R6 |
| 3 | 1nF | Resistor_SMD:R_0805_2012Metric | C6, C6, C6 |
| 3 | 1uF | Resistor_SMD:R_0805_2012Metric | C1, C1, C1 |
| 3 | 2M | Resistor_SMD:R_0805_2012Metric | R5, R5, R5 |
| 3 | 806K | Resistor_SMD:R_0805_2012Metric | R4, R4, R4 |
| 3 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3, U3, U3 |
| 3 | BLUE | LED_SMD:LED_0805_2012Metric | D4, D4, D4 |
| 3 | CH340C | SMD_Packages:SO-16-N | U4, U4, U4 |
| 3 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3, J3, J3 |
| 3 | DMG3415U | TO_SOT_Packages_SMD:SOT-23 | Q1, Q1, Q1 |
| 3 | E73-2G4M04S | E73:E73-2G4M04S | U1, U1, U1 |
| 3 | Factory Reset | E73:SolderJumperSingle | JP2, JP2, JP2 |
| 3 | JUMP | Resistor_SMD:R_0402_1005Metric | R7, R7, R7 |
| 3 | MBR120 | Diode_SMD:D_SOD-123 | D1, D1, D1 |
| 3 | ProMicro | footprints:Pro_Micro | U2, U2, U2 |
| 3 | Serial Connector | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J2, J2, J2 |
| 3 | TP4056 | Power_Integrations:SO-8 | U6, U6, U6 |
| 3 | USB_OTG | Connectors_USB:USB_Micro-B_Molex-105017-0001 | J1, J1, J1 |
The 121 most common of 143 parts.
More from jpconstantineau/NRF52-Board
12- 2 layers76.2 × 76.2 mm
4x4 platform
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
71 parts100BSD-3-Clause - 2 layers137.9 × 92.7 mm
ErgoTravel
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
71 parts100BSD-3-Clause - 2 layers40.6 × 48.3 mm
BlueMacro LED Tester
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
57 parts100BSD-3-Clause - 2 layers76.2 × 76.2 mm
4x4 platform
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
54 parts100BSD-3-Clause - 4 layers21.6 × 62.2 mm
4layers
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
54 parts100BSD-3-Clause - 2 layers21.6 × 62.2 mm
BlueMicro
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
54 parts100BSD-3-Clause - 2 layers76.2 × 76.2 mm
4x4 backpack
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
50 parts100BSD-3-Clause - 2 layers76.2 × 76.2 mm
4x4 backpack
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
46 parts100BSD-3-Clause - 2 layers76.2 × 76.2 mm
4x4 backpack
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
46 parts100BSD-3-Clause - 2 layers76.2 × 76.2 mm
4x4 backpack
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
46 parts100BSD-3-Clause - 2 layers20.3 × 33 mm
BlueMicro LED tester
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
43 parts100BSD-3-Clause
Similar boards
- 2 layers26.7 × 43.2 mm
Accelerando barangaroo
accelerando-consulting/accelerando_barangaroo
This is a simple breakout board for the eByte E73 module with nrf52832 microcontroller. This board requires minimal parts, in fact it can work with only the module and no other parts.
18 partsMIT - 2 layers53.5 × 58.5 mm
Drone fc v1.0
ehuang2021/drone-fc
A drone flight controller, with multithreaded firmware, and a custom PCB
26 parts - 2 layers45 × 40 mm
CircuitPythonBadge v1 2
neubauek/CircuitPythonBadge
Open Source Hardware Circuit Python Badge
91 parts4 - 4 layers54 × 35 mm
- 2 layers89 × 76.1 mm
- 2 layers70 × 140 mm
PCB V1
Jonathan-0101/skeletonKey
BEng Dissertation; Penetration-testing device to highlight security system vulnerabilities
46 parts1GPL-3.0 - 2 layers120 × 100 mm
- 4 layers52 × 39 mm
Motherboard
xjjak/LapCal
Building gloves that enable typing on a 34-key keyboard without an actual physical keyboard using IMUs and machine learning.
58 parts3
Questions
How big is the Panel PCB?
It measures 87.5 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel use?
143 parts, built around the CH340C, E73-2G4M04S1B, AP2112K-3.3 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the jpconstantineau/NRF52-Board repository on GitHub, at the commit this page was made from: the board is BlueMicro2.1a/panel/panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).