

USB C 5V Power Board
A USB-C 5V power board with ESD protection, resettable fuse, reverse-polarity protection, and 3.3V regulation designed in KiCad 10.
- Size
- 50 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 14
- Pads
- 59
- Tracks, vias
- 113, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Oct 2026
- Updated
- 6 Oct 2026
Overview
USB C 5V Power Board is an open-source printed circuit board by syedalicodes, from the syedalicodes/USB_C_5V_Power_Board repository on GitHub. It is a 2-layer board of 50 × 35 mm with 18 parts on 14 nets, routed with 113 tracks and 0 vias.
It is built around the AMS1117-3.3, CRCW12061K00FKEAC and CRCW12065K10FKEAC, with the AO3401A, CRCW1206100KFKEAC and SMF5.0A among its other parts. Its parts include 5 resistors, 4 capacitors, 3 diodes, 3 connectors and 1 IC.
Main components
6AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCRCW12061K00FKEAC
1206-55℃~+155℃ 1kΩ 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountCRCW12065K10FKEAC
1206-55℃~+155℃ 250mW 5.1kΩ Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsCRCW1206100KFKEAC
1206-55℃~+155℃ 100kΩ 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountSMF5.0A
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdUSB_C_5V_Power_Board
A USB-C 5V power board with ESD protection, resettable fuse, reverse-polarity protection, and 3.3V regulation designed in KiCad 10.
USB-C 5V Power Board
A compact USB-C 5V power board designed in KiCad 10 with input protection, reverse-polarity protection, a protected 5V output, and regulated 3.3V output.
📌 Project Overview
This project is a custom USB-C power-management PCB designed as a practical electronics and PCB-design project.
The board accepts a nominal 5V USB-C input and provides:
- Protected 5V output
- Regulated 3.3V output
- USB-C CC pull-down configuration
- Resettable overcurrent protection
- TVS transient-voltage protection
- P-channel MOSFET reverse-polarity protection
- Power-indicator LEDs
The complete schematic, PCB layout, manufacturing files, BOM, calculations, and testing procedure are included in this repository.
⚡ Block Diagram
USB-C INPUT
5V
│
▼
┌──────────────────┐
│ CC1 / CC2 │
│ 5.1kΩ Pull-down │
└────────┬─────────┘
│
▼
┌──────────────────┐
│ Resettable PTC │
│ Fuse │
└────────┬─────────┘
│
▼
┌──────────────────┐
│ TVS Protection │
│ SMF5.0A │
└────────┬─────────┘
│
▼
┌──────────────────┐
│ AO3401A PMOS │Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF 16V X7R | Capacitor_SMD:C_1206_3216Metric | C1, C3, C4 |
| 2 | 61300211121 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | APDT3216EC | LED_SMD:LED_1206_3216Metric | D2, D3 |
| 2 | CRCW12061K00FKEA | Resistor_SMD:R_1206_3216Metric | R4, R5 |
| 2 | CRCW12065K10FKEA | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 1 | 100nF 50V X7R | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CRCW1206100KFKEA | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | Littelfuse 1206L050 | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | SMF5.0A | Diode_SMD:D_SOD-123 | D1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 2 layers100 × 75 mm

- 2 layers103 × 53 mm

ELS
jballard86/Electronic-Lead-Screw
Anticipated features: - Metric / Inch threading - Metric / Inch feeding - Auto threading with 2 steppers - Auto turn to a specified diameter - Pendent Control with: - Manual Z control - Manual X control - Radius cutting…
46 parts - 2 layers100 × 100 mm

LEOS dualpower
MatthewIsHere/leos-dualpower-pcb
A backup 5V stackable power supply for the LEOS High Altitude Balloon Stack
39 parts - 2 layers90 × 80 mm

- 2 layers70 × 50 mm

- 4 layers100 × 80 mm

- 4 layers60 × 60 mm

Ummon
JonaWe/ummon
ummon (from German Umgebungsmonitor, "environment monitor") is an ESP32-C6 based environmental sensor board with USB-C power.
95 parts - 4 layers

CABadge V2 1
nbtca/CABadge
CABadge 计协电子吧唧:基于 ESP32-S3 的开源圆屏互动徽章,支持动态壁纸、触摸交互、Wi-Fi/BLE 和趣味小应用,提供 PCB、3D 打印外壳、固件及配套工具。
110 parts15MIT
Questions
How big is the USB C 5V Power Board PCB?
It measures 50 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB C 5V Power Board use?
18 parts, built around the AMS1117-3.3, CRCW12061K00FKEAC, CRCW12065K10FKEAC and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB C 5V Power Board KiCad files?
From the syedalicodes/USB_C_5V_Power_Board repository on GitHub, at the commit this page was made from: the board is KiCad/USB_C_5V_Power_Board.kicad_pcb and its schematic KiCad/USB_C_5V_Power_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB C 5V Power Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask syedalicodes before reusing the design.