

WashrBoard
- Size
- 70 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 32
- Pads
- 142
- Tracks, vias
- 349, 45
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Aug 2024
- Updated
- 2 Feb 2026
Overview
WashrBoard is an open-source printed circuit board by Spaceona, from the Spaceona/WashrBoard repository on GitHub. It is a 2-layer board of 70 × 50 mm with 38 parts on 32 nets, routed with 349 tracks and 45 vias.
It is built around the ESP32-C3-WROOM-02U-N4, TLV1117LV33DCYR and USBLC6-2SC6, with the RR1220P-103-D, CL31B105KCHNNNE and RT1206FRE074K7L among its other parts. Its parts include 10 resistors, 10 connectors, 6 capacitors, 4 ICs and 2 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12ESP32-C3-WROOM-02U-N4
SMD-19P-40℃~+85℃ -98dBm 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 Chip UART、SPI、I2C、I2S、JTAG、USB SMD-19P WiFi Modules ROHSEspressif SystemsWiFi ModulesTLV1117LV33DCYR
SOT-223-40℃~+125℃@(TJ) 0.003%Vout 1 1.2V@(1A) 12V 1A 3.3V 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)RR1220P-103-D
0805-55℃~+125℃ 100V 100mW 10kΩ Thin Film Resistor ±0.5% ±25ppm/℃ 0805 Chip Resistor - Surface Mount ROHSSusumuChip Resistor - Surface MountCL31B105KCHNNNE
1206100V 1uF X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTRT1206FRE074K7L
1206-55℃~+155℃ 200V 250mW 4.7kΩ Thin Film Resistor ±1% ±50ppm/℃ 1206 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountCRCW12065K10FKEAC
1206-55℃~+155℃ 250mW 5.1kΩ Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountCRCW120675R0FKEAC
1206-55℃~+155℃ 250mW 75Ω Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount1206B104K500CT
1206100nF 50V X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSWalsin TechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMTCC1206KRX7R9BB103
120610nF 50V X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTUMK316BJ225KD-T
12062.2uF 50V X5R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMTHSMG-C150
1206-40℃~+85℃ 15mcd 170° 2.2V 20mA 570nm 572nm 65mW Discrete Diode Green Diffused Lens Yellow Green 1206 LED Indication - Discrete ROHSAVAGOLED Indication - Discrete
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 1 uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C6 |
| 2 | 4.7k | Resistor_SMD:R_1206_3216Metric | R3, R5 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | 75 | Resistor_SMD:R_1206_3216Metric | R4, R6 |
| 1 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 10,000 pF | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 2.2 uF | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | ESP32-C3-WROOM-02U | RF_Module:ESP32-C3-WROOM-02U | U4 |
| 1 | GREEN LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | IMU | Footprints:XDCR_ICM-42670-P | MT1 |
| 1 | JST GH | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J5 |
| 1 | LOGO | Footprints:SpaceOnaLogo | G*** |
| 1 | PTS526 SK15 SMTR2 LFS | Footprints:PTS526SK15SMTR2 LFS | U3 |
| 1 | ProgPoint 5V | TestPoint:TestPoint_Pad_D1.0mm | J6 |
| 1 | ProgPoint D_N | TestPoint:TestPoint_Pad_D1.0mm | J9 |
| 1 | ProgPoint GND | TestPoint:TestPoint_Pad_D1.0mm | J10 |
| 1 | ProgPoint P9 GND | TestPoint:TestPoint_Pad_D1.0mm | J7 |
| 1 | ProgPointPoint D_P | TestPoint:TestPoint_Pad_D1.0mm | J8 |
| 1 | RED LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Regulator | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | TestPoint 3.3V | TestPoint:TestPoint_Pad_D1.0mm | J4 |
| 1 | TestPoint 5V | TestPoint:TestPoint_Pad_D1.0mm | J1 |
| 1 | TestPoint GND | TestPoint:TestPoint_Pad_D1.0mm | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
Similar boards
- 2 layers100 × 75 mm

- 2 layers238 × 114 mm

Panel
sbarisic/MagMouse
Open source hall-effect based mouse - no mechanical contacts - no failure points
384 parts2 - 4 layers154 × 81 mm

System candidate
bernardopg/ps28-modern-amp
Infinity Primus PS28 amplifier modernization: TPA3255 engineering, validation and safety-gated workflow
269 parts1 - 4 layers100 × 100 mm

- 4 layers252 × 58 mm

Ufc panel
w3z315/a10c-simpit-pcbs
A collection of my DIY PCBs, including their code, for DCS:World's A10CII
101 parts6GPL-3.0 - 4 layers260 × 110 mm

Pandore
filliformes/pandore
pandore is an open-source digital audio instrument protyping platform based on the LattePanda Mu.
804 parts2 - 2 layers90 × 80 mm

- 2 layers100 × 100 mm

SensorMicrocontroller
WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project
39 parts1
Questions
How big is the WashrBoard PCB?
It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WashrBoard use?
38 parts, built around the ESP32-C3-WROOM-02U-N4, TLV1117LV33DCYR, USBLC6-2SC6 and RR1220P-103-D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WashrBoard KiCad files?
From the Spaceona/WashrBoard repository on GitHub, at the commit this page was made from: the board is WashrBoard.kicad_pcb and its schematic WashrBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WashrBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Spaceona before reusing the design.