Skip to the content

Open-source KiCad boards

32 match “ESD321”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 8 layers50 × 50 mmOmodri laas, the printed circuit board in 3D

    Omodri laas

    open-dynamic-robot-initiative/open-motor-driver-initiative

    Open-source drive for brushless motors, following the open dynamic robot initiative

    265 parts122BSD-3-Clause
  • 4 layers105 × 38 mmPrintalyzer uvdensitometer, the printed circuit board in 3D

    Printalyzer uvdensitometer

    dektronics/printalyzer-uvdensitometer

    UV/VIS Reflection and Transmission Densitometer for Photographic Darkroom Use

    101 parts6
  • 4 layers70 × 100 mmEDUEXO custom PCB, the printed circuit board in 3D

    EDUEXO custom PCB

    fabianjust/classroom-exo

    Classroom-ready open-source educational exoskeleton for biomedical and control engineering

    75 parts6
  • 2 layers55 × 55 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    Deni90/singleDigitNixieClock

    A small project that combines ESP32 with a vintage Soviet Nixie tube from the 70’ to create an artistic clock. Originally developed on ESP8266/Arduino, now evolved to ESP32 with ESP-IDF for greater performance and…

    39 parts5MIT
  • 4 layers31.8 × 37.3 mmRaven hardware, the printed circuit board in 3D

    Raven hardware

    merrittlj/raven-hardware

    A minimalistic smartwatch's hardware.

    83 parts1GPL-3.0
  • 4 layers50 × 25 mmDac, the printed circuit board in 3D

    Dac

    77volatile77/TI-USB-Audio-Devboard

    A breadboard adapter for the PCM2906C: A USB 1.1 audio codec made by Texas Instruments. Note: the way the header pinout is defined, this board is only intended to be used as a DAC.

    34 partsMIT
  • 4 layers92 × 70.5 mmDacAmp, the printed circuit board in 3D

    DacAmp

    77volatile77/USB-Headphone-Amplifier

    111 parts
  • 4 layers86.3 × 25 mmHdmi snake, the printed circuit board in 3D

    Hdmi snake

    Ajstros/hdmi-snake

    Hardware design for playing snake over HDMI.

    62 parts
  • 2 layers29.5 × 53.6 mmESP32 S2 Breakout, the printed circuit board in 3D

    ESP32 S2 Breakout

    EzerLonginus/ESP32_S2_SOLO_Breakout

    Breakout Board for ESP32 S2 Solo

    41 partsGPL-3.0
  • 4 layers50 × 32 mmMotherboard (G0B1), the printed circuit board in 3D

    Motherboard (G0B1)

    Kaleidogeist/Galia

    Modular split ergonomic keyboard system

    68 partsCERN-OHL-S-2.0
  • 2 layers280 × 110 mmPCB Piano v1.1, the printed circuit board in 3D

    PCB Piano v1.1

    ninjatill/PCB-Capacitive-Touch-Synth

    A Raspberry Pi-based synthesizer with capacitive touch keys directly on a PCB.

    284 parts
  • 4 layers40 × 60 mmCAM MK3-revB, the printed circuit board in 3D

    CAM MK3-revB

    ISSUIUC/ISS-PCB

    Building custom flight computers

    117 parts33
  • 4 layers45 × 100 mmMIDAS MK2, the printed circuit board in 3D

    MIDAS MK2

    ISSUIUC/ISS-PCB

    Building custom flight computers

    217 parts33
  • 4 layers45 × 100 mmMIDAS MK2.1, the printed circuit board in 3D

    MIDAS MK2.1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    219 parts33
  • 4 layers25 × 80 mmMini MK1, the printed circuit board in 3D

    Mini MK1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    135 parts33
  • 2 layers144.9 × 125.3 mmDaughterboard (Cantaloupe), the printed circuit board in 3D

    Daughterboard (Cantaloupe)

    Kaleidogeist/Galia

    Modular split ergonomic keyboard system

    53 partsCERN-OHL-S-2.0
  • 6 layers95 × 55 mmGlasgow, the printed circuit board in 3D

    Glasgow

    GlasgowEmbedded/glasgow

    Scots Army Knife for electronics

    782 parts2.2k0BSD
  • 2 layers139.7 × 100.3 mmAchterart, the printed circuit board in 3D

    Achterart

    CounterPillow/achterart

    An 8-way USB-to-UART converter board based on the CH348 chip

    63 parts2
  • 4 layers83 × 55 mmSADA Board, the printed circuit board in 3D

    SADA Board

    makerCL/JUCI_CubeSat_SADA

    Solar Array Drive Assembly

    160 parts2
  • 4 layers130 × 125 mmFlatburn V5, the printed circuit board in 3D

    Flatburn V5

    MIT-Senseable-City-Lab/flatburn-lte

    Part of the City Scanner project at MIT Senseable City Lab, Flatburn is an open-source, solar-powered, modular sensing platform that can be easily deployed on road vehicles to collect various environmental data.

    587 parts1MIT
  • 8 layers90.2 × 101.1 mmRevC fm, the printed circuit board in 3D

    RevC fm

    Sierra-Lobo/mainboard-hardware

    PyCubed mainboard v5 fork by Sierra Lobo for Foras Promineo CubeSat

    644 parts1
  • 4 layers80.5 × 42.7 mmSnakeTank 4 sig pwr gnd sig, the printed circuit board in 3D

    SnakeTank 4 sig pwr gnd sig

    vpolda/Snake-Tank

    A DIY reptile tank monitor for remote monitoring and data collection.

    49 parts1

Parts matching “ESD321”

See them in the parts library