

EDUEXO custom PCB
Classroom-ready open-source educational exoskeleton for biomedical and control engineering
- Size
- 70 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 59
- Pads
- 236
- Tracks, vias
- 472, 59
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Nov 2023
- Updated
- 30 Jan 2025
Overview
EDUEXO custom PCB is an open-source printed circuit board by fabianjust, from the fabianjust/classroom-exo repository on GitHub. It is a 4-layer board of 70 × 100 mm with 75 parts on 59 nets, routed with 472 tracks and 59 vias.
It is built around the INA125P, ESD321DPYR and 0630CDMCCDS-1R5MC, with the BAT60BE6327HTSA1, BSS123 and D1213A-01WS-7-HXY among its other parts. Its parts include 18 capacitors, 13 resistors, 6 diodes, 6 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
10INA125P
PDIP-16-18V~-1.35V、1.35V~18V -40℃~+85℃ 0.9V/us 1% 100dB 2.7V~36V 20nA 250uV 2uV/℃ 38nV/√Hz@1kHz 460uA 4V/V~10000V/V 60us External resistor gain、Enable/shutdown function、Overvoltage Protection Single-channel PDIP-16 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation AmplifiersESD321DPYR
X1-SON-2(0.6x1)-40℃~+125℃ 0.9pF 100pA 3.6V 4.5V 40W 6.3V 6A@8/20us IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS Unidirectional X1-SON-2(0.6x1) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)0630CDMCCDS-1R5MC
SMD,7x6.6mm1.5uH 10.2A 12.1mΩ 15.2A Molded Inductor ±20% SMD,7x6.6mm Molding Power Inductors ROHSSumidaPower InductorsBAT60BE6327HTSA1
SOD-323-55℃~+125℃ 1 Independent 10V 3A 410uA@8V 480mV@1A 5A SOD-323 Schottky Diodes ROHSInfineon TechnologiesSchottky DiodesBSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsD1213A-01WS-7-HXY
SOD-323ESD And Surge Protection (TVS/ESD)HXY MOSFETLTST-C191TBKT
0603-20℃~+80℃ 104mcd 130° 20mA 3.3V 465nm~475nm 468nm 75mW Blue Discrete Diode Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteLTST-C191KRKT
0603-55℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteSI3483CDV
TSOP-6-55℃~+150℃ 1 P-Channel 11.5nC@10V 140pF 170pF 1nF 30V 34mΩ@10V 3V 4.2W 8A P-Channel TSOP-6 MOSFETs ROHSVishay IntertechnologyMOSFETs10118192-0002LF
SMD-30℃~+80℃ 1 1.8A 100V 5P Black Female Micro-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors
README
README.mdclassroom-exo
Classroom-ready open-source educational exoskeleton for biomedical and control engineering
The classroom Exo development is guided by the manual. The manual is designed to assist you in seamlessly transitioning from EduExoPro to Classroom Exo. Whether you're a developer, educator, or enthusiast, the detailed content in each folder aims to provide clarity and guidance.
How to Use This Manual: Begin by reading through the manual to familiarize yourself with the upgrade process. Depending on your area of interest or expertise, navigate to the specific folders that match your requirements—whether it's CAD, PCB design, electronics, or material lists. Feel free to collaborate by providing feedback, raising issues, or contributing to the ongoing development of Classroom Exo. Your input is highly valued.
We prepared three lab instructions for a) Force Control, b) Muscle Activity Control, and c) PID Control for Biomedical and Control Engineering University Education. Feel free to use these documents to build your own lab for a physical human-machine interaction, health robotics, and for all control theory courses.
If you want to know more about the Classroom Exo, check out the corresponding Journal Paper: https://www.degruyter.com/document/doi/10.1515/auto-2023-0208/html
We hope this manual serves as a valuable resource in your journey to implement Classroom Exo. Happy exploring and building with Classroom Exo!
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | +3V3, +5V0, ANGLE_SRV0, ARDu_CONTROL_SRV0, BAT_VALUE_0, DRIVE_PWM_SRV0, EMG0, EMG1, GND1, GND2, GND3, GND4, OUTPUT_SG0, POWER_SRV0, SG0_SGN0, SG0_SGN1 +3 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C9, C10, C12, C14, C17 |
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C11, C13, C15, C18 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C6, C16 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | ESD321 | Diode_SMD:D_0402_1005Metric | D5, D6 |
| 1 | 170 | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 1uH | EDUEXO-custom-PCB:L_0630CDMCCDS-1R5MC | L1 |
| 1 | 30.31k | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 300 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 383R | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 47nF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 5.24k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 6.8uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 60.4R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Arduino_Nano_33_IOT | EDUEXO-custom-PCB:MODULE_ABX00027_ThroughHoles | A1 |
| 1 | BAT0 | EDUEXO-custom-PCB:TE_1-2834011-2 | J6 |
| 1 | BAT60B | Diode_SMD:D_SOD-323 | D1 |
| 1 | BQ25886RGER | EDUEXO-custom-PCB:Texas_S-PVQFN-N24_EP2.1x2.1mm_ThermalVias | U2 |
| 1 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | D1213A | Diode_SMD:D_SOD-323 | D4 |
| 1 | EMG0 | EDUEXO-custom-PCB:TE_1-2834011-3 | J1 |
| 1 | EMG1 | EDUEXO-custom-PCB:TE_1-2834011-3 | J2 |
| 1 | INA125P | INA125P:DIP794W45P254L1969H508Q16 | U1 |
| 1 | Iset | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | LED_Blue | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED_RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LOGO | CBPR:CBPR | G*** |
| 1 | LP11EE1NCSRGB | EDUEXO-custom-PCB:SW_LP11EE1NCSRGB | U3 |
| 1 | SG0 | EDUEXO-custom-PCB:TE_1-2834011-4 | J3 |
| 1 | SRV0 | EDUEXO-custom-PCB:TE_1-2834011-4 | J4 |
| 1 | Si3483CDV | Package_TO_SOT_SMD:TSOT-23-6 | Q2 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0805_2012Metric | TH1 |
| 1 | USB_B_Micro | EDUEXO-custom-PCB:USB_micro_B_10118192-0002LF | J5 |
| 1 | Vset | Resistor_SMD:R_0805_2012Metric | R9 |
Similar boards
- 4 layers39 × 35.2 mm

- 4 layers40 × 60 mm

Trinketcore
alph4345/test
TrinketCore puts everything a small rechargeable gadget needs on one 40 × 60 mm board, ready to order assembled from PCBWay:
113 parts - 2 layers82.6 × 61 mm

- 2 layers121.9 × 61 mm

- 4 layers55 × 35 mm

Pocketbeagle
beagleboard/pocketbeagle
BeagleBoard.org PocketBeagle - ultra small, ultra flexible, ultra affordable
50 parts284CC-BY-4.0 - 6 layers86.4 × 54.6 mm

BeagleBone Black.unrouted
The-OpenROAD-Project-Attic/SA-PCB
Annealing-based PCB placement tool
275 parts44BSD-3-Clause - 4 layers140 × 81 mm

- 2 layers280 × 110 mm

PCB Piano v1.1
ninjatill/PCB-Capacitive-Touch-Synth
A Raspberry Pi-based synthesizer with capacitive touch keys directly on a PCB.
284 parts
Questions
How big is the EDUEXO custom PCB PCB?
It measures 70 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the EDUEXO custom PCB use?
75 parts, built around the INA125P, ESD321DPYR, 0630CDMCCDS-1R5MC and BAT60BE6327HTSA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EDUEXO custom PCB KiCad files?
From the fabianjust/classroom-exo repository on GitHub, at the commit this page was made from: the board is PCB_File/EDUEXO-custom-PCB/EDUEXO-custom-PCB.kicad_pcb and its schematic PCB_File/EDUEXO-custom-PCB/EDUEXO-custom-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EDUEXO custom PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask fabianjust before reusing the design.