
EDUEXO custom PCB
fabianjust/classroom-exo
Classroom-ready open-source educational exoskeleton for biomedical and control engineering

Pressure elec board is an open-source printed circuit board by mgiglia92, from the mgiglia92/pressure_rig_pcb repository on GitHub. It is a 2-layer board of 121.9 × 61 mm with 15 parts on 53 nets, routed with 102 tracks and 0 vias.
It is built around the ARDUINO UNO R3, MCP3301-CI/P and INA125P, with the MPX2200D and IRF540N among its other parts. Its parts include 5 ICs, 4 resistors, 3 connectors, 1 diode and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R4 |
| 2 | MCP3301 | ADC:Microchip-MCP3301-CI_P-Manufacturer_Recommended | U4, U6 |
| 2 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J1, J2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 810 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_SHIELD_UNO_R3_WithMountingHoles | A1 |
| 1 | INA125P | INA125P:ina125p_bigger_pads | U5 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MCP4251-xxxx-P | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | mpx2200 | MPX:MPX2200 | U1 |

fabianjust/classroom-exo
Classroom-ready open-source educational exoskeleton for biomedical and control engineering



immonel/e-runout
This project is used to measure electrical runout by comparing measurements from touching probe sensors and Eddy current probes simultaneously.

Jan-IngenHousz-Institute/spectrometer-C12666MA
Repository for the fw and analysis developed during the internship of Kjell Tolsma.

jdeguire/pjcontroller
Hardware and software for controlling your homebuilt video-beaming creation.

nurbano/opentribhw
Este proyecto presenta una plataforma abierta y de bajo costo para la instrumentación, medición y control en ensayos tribológicos de tipo Pin-on-Disk y Block-on-Ring.

SeunOjuoko/KiCAD-PCB-Design
Here are my design of circuit schematics and PCB for real-world applications on KiCAD
It measures 121.9 × 61 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the ARDUINO UNO R3, MCP3301-CI/P, INA125P and MPX2200D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mgiglia92/pressure_rig_pcb repository on GitHub, at the commit this page was made from: the board is pressure-elec-board.kicad_pcb and its schematic pressure-elec-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mgiglia92 before reusing the design.