2 layers
Overview
The MCP3301-CI/P is an analog To Digital Converter made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 100kHz 13 2LSB 4.5V~5.5V 50nA 78dB 85kHz~1.7MHz、1.7MHz Not supported SAR SPI Yes PDIP-8 Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (Analog_ADC:MCP3301, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 1 are in stock at JLCPCB (part C184470). 7 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
Parameters
16- ADC architecture
- SAR
- Clock Frequency
- 85kHz~1.7MHz
- Clock/Oscillator
- External
- Features
- Bipolar input
- Integral non - linearity
- 2LSB
- Interface
- SPI
- Operating Temperature
- -40℃~+85℃
- Programmable Gain
- Not supported
- Quiescent Current (Iq)
- 50nA
- Resolution (Bits)
- 13
- Sampling Rate
- 100kHz
- Signal-to-Noise Ratio
- 78dB
- Voltage - Supply
- 4.5V~5.5V
- Voltage Reference
- External
- differential input
- Yes
- number of channels
- 1
Order codes
1- MCP3301-CI/PLCSC C184470
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | Vref | Power in |
| 2 | IN+ | Input |
| 3 | IN- | Input |
| 4 | Vss | Power in |
| 5 | CS/SHDN | Input |
| 6 | Dout | Output |
| 7 | CLK | Input |
| 8 | Vdd | Power in |
Open-source boards using it
All 7- 2 layers121.3 × 120.9 mm
Erun2
immonel/e-runout
This project is used to measure electrical runout by comparing measurements from touching probe sensors and Eddy current probes simultaneously.
38 parts - 2 layers24.8 × 86.4 mm
Raspberry pico board Back
Jan-IngenHousz-Institute/spectrometer-C12666MA
Repository for the fw and analysis developed during the internship of Kjell Tolsma.
16 parts - 2 layers110.5 × 104.1 mm
Pjc kicad
jdeguire/pjcontroller
Hardware and software for controlling your homebuilt video-beaming creation.
89 partsGPL-3.0 - 2 layers121.9 × 61 mm
- 2 layers47.5 × 95 mm
Erun
immonel/e-runout
This project is used to measure electrical runout by comparing measurements from touching probe sensors and Eddy current probes simultaneously.
14 parts - 2 layers73.7 × 92.1 mm
Erun2backup
immonel/e-runout
This project is used to measure electrical runout by comparing measurements from touching probe sensors and Eddy current probes simultaneously.
21 parts
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/microchip/MCP3301-CI/P" title="MCP3301-CI/P in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/microchip/MCP3301-CI/P.jpg" alt="MCP3301-CI/P" width="1200" height="900">[](https://pcbkit.io/parts/microchip/MCP3301-CI/P)Questions
Is there a KiCad symbol and footprint for the MCP3301-CI/P?
Yes. The symbol is Analog_ADC:MCP3301 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP3301-CI/P?
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the MCP3301-CI/P datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP3301-CI/P?
JLCPCB lists it as part C184470, with 1 in stock; the sellers' links on this page open their listings.
What can replace the MCP3301-CI/P?
Parts like it in the library: the XD548 by XINLUDA, the XD0832CC by XINLUDA, the TM7711-DIP8 by TM and the XD549 by XINLUDA. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP3301-CI/P?
7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
XD548
DIP-8-40℃~+85℃ 0.5LSB 1 3V~6.5V 45.5kHz 4MHz 8 800uA External、Built-in SAR Serial port Yes DIP-8 Analog to Digital Converters (ADC) ROHSXINLUDAAnalog To Digital Converters (ADC)XD0832CC
DIP-8-40℃~+85℃ 10kHz~400kHz、250kHz 1LSB 2 2mA 4.5V~6.3V 8 SAR Yes DIP-8 Analog to Digital Converters (ADC) ROHSXINLUDAAnalog To Digital Converters (ADC)TM7711-DIP8
DIP-8Analog To Digital Converters (ADC)TMXD549
DIP-8-40℃~+85℃ 0.5LSB 1 3V~6.5V 40kHz 4MHz 8 Serial port Yes DIP-8 Analog to Digital Converters (ADC) ROHSXINLUDAAnalog To Digital Converters (ADC)MCP3202-CI/P
PDIP-8-40℃~+85℃ 12 2 2.7V~5.5V 2LSB 50kHz、100kHz 5uA 900kHz、1.8MHz External External No SAR SPI PDIP-8 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)AD7895ANZ-2
PDIP-8-40℃~+85℃ 1 12 15MHz 200kHz 5V 5uA 70dB Built-in External SAR Serial port PDIP-8 Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADC)TLC0831CP
PDIP-80℃~+70℃ 1 10kHz~600kHz、250kHz 4.5V~5.5V 8 External External Multiplexers Not supported SAR Serial port Yes PDIP-8 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)TLC0832CP
PDIP-80℃~+70℃ 10kHz~600kHz 1LSB 2 2.5mA 4.5V~5.5V 8 External External Not supported SAR Serial port Yes PDIP-8 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)